Question about 1998 Plymouth Voyager

1 Answer

98 voyager dinger comes on at random sometimes stays on

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Plymouth Master
  • 76,132 Answers

Do you mean door ajar dinger? If so you must remove the door pamel and replace the switch that is located on the door latch inside the door.

Posted on Feb 17, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why do my drl come on and stay on after I've turned my van off..then sometimes start blocking real fast. 98 Plymouth voyager

Debbie, do the lights turn off after 5 mins. or less, this is normal, the computer can be reprogrammed, I believe if you want to change amount of time or not at all.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Feb 27, 2016 | Plymouth Cars & Trucks

1 Answer

1998 Plymouth grand voyager ignition won't turn

I have had this happen on my 98 Voyager. Just have a new key cut. This new key will sometimes cure the problem. The older keys get worn out and won't unlock the ignition. Try this before a much more expensive and time consuming change of the ignition.

Nov 01, 2011 | 1998 Plymouth Voyager

1 Answer

My oil light comes on after the engine warms up and stays on the entire time i'm driving. We've changed the oil and filter and keep a check on the levels but the light continues to come on. Any...

you may have a bad oil sending unit the oil light works off of oil pressure i would start by changing the oil sending unit and if the light still comes on then you have bigger problems. get a mechanical oil pressure gauge and hook up and check the oil pressure after the engine has warmed up to operating temp you should have at around 30 psi but can survive with 10psi but might be time for a rebuild. if no oil pressure then you might have a broken shaft between the oil pump and the distrubuter. if the engine is running and not making any out of the normal ticking, knocking sounds probably just the sending unit though, they are about 25 dollars and i believe its right above the oil filter on the 6 cylinder.

Dec 07, 2010 | 1999 Plymouth Voyager

1 Answer

Interior brake light

if u have an electric trailer brake controller fitted try disconnecting it as sometimes the battery feed to the unit can randomly backfeed the brake circuit causing your symptoms

Jun 22, 2009 | 1998 Mazda B-Series

1 Answer

Abs controller issues?

I think some of senors at the wheels are broken and there are a lot of rust on the ring with small teeths which has damaged the sensor.
You must before you change any sensor take of all rust on this ring.
I changed sensors and took of all rust on these teeth and than it worked.
I hope will solve your problem.
Have nice day.

Jun 20, 2009 | 2001 Chrysler Voyager

1 Answer

98 Voyager 3.3l Wont start

Sounds like you have a parasitic loss somewhere in the electrical system. There is a component that is staying on after you leave the car and it drains the battery.The way to check for this is to get yourself a 12 volt test light from an auto parts store.Pull the fuse for your radio if it has a digital display. Under the hood disconnect the positive battery terminal from the battery.Put the clamp end of the test light to the battery terminal and the other end to the post. If there is a drain the light will be lit.Leave it for ten minutes and see if it is still lit.This allows for things that time out. If it is still on start pulling fuses and have a buddy tell you if the light stays on or goes off. If it goes off, identify what that fuse controls. You will need to pin down the circuit in that area that is causing the problem after that. Keep in mind that one of the worst offenders for this is the rear dome light being left on. That is the first thing I check.

Nov 30, 2008 | 1998 Plymouth Voyager

1 Answer

Problem caravan 98

If it is staying in second gear, this is a default called the "Limp mode". When the computer sees a problem with the transmission it locks it in second gear so you can at least get home. This could be any number of problems. Your best bet is a GOOD mechanic.

Jul 17, 2008 | 2000 Chrysler Grand Voyager

Not finding what you are looking for?
1998 Plymouth Voyager Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides