Question about Cadillac Escalade
How do i read codes for problems w/ ride control and stability
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this means that you have a fault with your stability control system. the stability control is designed to prevent a rollover it detects body roll when you are driving the ride control is the air suspension sytem this keeps ride hieght the same based on how wieght is in the vehicle. check the links that connect the switches to the suspension you may have one dissconnected (these links wear out over time you night have to replace them) there is one on each wheel postion if you need anything else let me know
Posted on Jun 02, 2009
SOURCE: Stabily system diabled - error
Your stability control uses the ABs wheel speed Sensors and the steering collumn sensor to know "when you need more stability". It sounds as if the front wheel speed sensor is sending bad info due to:
A) corrosion under the sensor causing erratic readings
B) front wheel bearing failing causing erratic readings
C) column sensor failing causing erratic readings
The GM dealer is the only place I know to have THOSE components tested. You can change any of these sensors yourself once you know which one it is. The "service stability" indicator is on because one of the sensors is not giving correct data, and the default mode is to disable the system.
Good luck and hope this helps,
Posted on Jun 28, 2009
Tips for a great answer:
Apr 15, 2014 | 2004 Cadillac Escalade Ext
Mar 27, 2013 | 2003 Cadillac Escalade
Whenever this warning light or any
other stays on in the dash it is indicating that the systems control
module (or the system sensor in the case of lights like low oil
pressure, door open indicators etc.) has detected a fault, it then
disables the system (this applies to ABS,TCS, TCM, SRS, TPMS, MIL,
CEL and BCM faults and others) as long as the light is on. You must
now have the dealer hook up a special electronic diagnostic tool and
"scan" the system for the fault code that is stored for the
Legend of Abbreviations. ABS Anti-lock brake system. TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module. TPMS Tire Pressure Monitor System, MIL Malfunction Indicator Lamp, CEL Check Engine Light.
Dec 21, 2012 | 2003 Cadillac Escalade
Sep 22, 2011 | 2003 Cadillac Escalade
Feb 24, 2010 | 2003 Cadillac Escalade Ext
Nov 11, 2009 | 2003 Cadillac Escalade
Jul 11, 2009 | 2002 Cadillac Escalade
Jun 28, 2009 | 2004 Cadillac Escalade
Sep 07, 2008 | 2002 Cadillac Escalade
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: