Question about 1988 Jeep Grand Wagoneer
Rebalence your wheels they might have lost a wheel weight
Posted on Feb 17, 2012
Testimonial: "Thank you for the suggestion. It worked great. Thanks."
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check the front steering damper. The steering damper is a shock that is mounted horizontaly in the front. The damper is bad if you see oil leaking from it or if the car has high mileage and never been replaced.
Posted on Feb 16, 2009
You got the ignition cover, what you need to do an cylinder compression test and also check your injector for voltage while engine running hook test light to battery pos on neg and neg on pos, at injector harness check for pulsation, if you have pulsation elec. system ok, if good compression bad injector.if bad compression piston ring's or valve's.
Posted on Dec 08, 2009
That can be your thermostat that do not open(stuck) when the motor is warm, take that out and drive for a few miles but keep an eye on the heat indicator if the problem still exists then your radiator need a flush. remember a thermostat is for cold conditions, if you saying in a warm area or country that thermostat is not necessary
Posted on Dec 12, 2010
Tips for a great answer:
Jun 11, 2011 | 1989 Jeep Grand Wagoneer
Jun 01, 2011 | 1988 Jeep Grand Wagoneer
Feb 01, 2011 | 1989 Jeep Grand Wagoneer
Jan 30, 2011 | 1989 Jeep Grand Wagoneer
Dec 12, 2010 | 1989 Jeep Grand Wagoneer
Jan 29, 2010 | 1989 Jeep Cherokee
Dec 08, 2009 | 1989 Jeep Grand Wagoneer
May 10, 2009 | 1989 Jeep Grand Wagoneer
Apr 19, 2009 | 1989 Jeep Grand Wagoneer
253 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: