Question about 2001 Kia Sephia

Open Question

Remove and replace starter 2001 kia sephia/location/photograph

Remove and replace starter/location/photo

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 90 Answers

SOURCE: 1198 kia sephia

hi
it locate behind the engine near the flywheel of transmission and engine junction block

Posted on Jul 02, 2008

Ad
  • 98 Answers

SOURCE: Changing the starter on a Kia Spectra

Here's step-by-step instructions on how to access, remove and re-install your alternator. Hope it helps! Have a great day!

Alternator Kia_Sephia_Rio_Spectra_Optima_1998-2006

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Disconnect the negative battery cable.
  3. Temporarily loosen the water pump pulley bolts, 1.6L (VIN 3) engine only.
  4. Remove the front air intake inlet pipe bolts, 1.8L engine only.
  5. Remove the top hose from the air intake inlet pipe, 1.8L engine only.
  6. Remove the air intake inlet pipe clamp and the pipe, 1.8L engine only.
  7. Remove the power steering pump, 2.0L engine only.
  8. Remove the power steering pump bracket, 2.0L engine only.
  9. Remove the alternator B terminal cover cap.
  10. Disconnect the alternator electrical connections.
  11. Loosen, but do not remove the alternator pivot bolt and the tensioner mounting bolt.
  12. Remove the drive belt(s); relieve tension on the belt by rotating the adjustment bolt.
  13. Remove the water pump pulley, 1.6L (VIN 3) engine only.
  14. Remove the power steering pump, 1.6L (VIN 3) engine only.
  15. Remove the power steering pump bracket, 1.6L (VIN 3) engine only.
  16. Remove the alternator tensioner mounting bolt and the belt tensioner.
  17. Remove the alternator pivot bolt.
  18. Loosen the bolt at the base of the adjusting bracket and rotate the bracket up.
  19. Remove the alternator. 0900c15280028419.jpgAlternator mounting—1.5L and 1.6L (VIN 5) engine shown 0900c1528002841a.jpgAlternator mounting—2.0L and 1.6L (VIN 3) engines shown 0900c1528002841b.jpgAlternator mounting—2.4L and 2.7L engine
To install:
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Install the alternator.
  3. Install the alternator pivot bolt and hand-tighten at this time.
  4. Rotate the adjusting bracket into position, place the belt tensioner into position. Hand-tighten the mounting bolt.
  5. Install the drive belt.
  6. Adjust the belt tension by rotating the adjustment bolt.
  7. The belt deflection for 1.5L, 1.6L (VIN 5), 2.4L and 2.7L engines, is as follows:
    1. New belt: 0.22-0.28 in. (5.5-7mm).
    2. Used belt: 0.24-0.28 in. (6-7mm).
  8. The belt deflection for 1.6L (VIN 3) engine is as follows :
    1. New belt: 0.13-0.15 in. (3.3-3.7mm).
    2. Used belt: 0.17-0.19 in. (4.2-4.7mm).
  9. The belt deflection for the 2.0L engine, is as follows:
    1. New belt: 0.22-0.31 in. (5.5-8mm).
    2. Used belt: 0.33-0.45 in. (8.5-11.5mm).
  10. The belt deflection for the 1.8L engine, is as follows:
    1. New belt: 0.23-0.31 in. (6-8mm).
    2. Used belt: 0.28-0.35 in. (7-9mm).
  11. Tighten the tensioner bolt to 14-19 ft. lbs. (19-26 Nm) and the pivot bolt to 28-38 ft. lbs. (38-51 Nm).
  12. Connect the alternator electrical connections.
  13. Install the alternator B terminal cover cap.
  14. Install the power steering pump and adjust the power steering belt tension, 2.0L and 1.6L (VIN 3) engines only.
  15. Install the water pump pulley, 2006 1.6L engine only.
  16. Install the air intake inlet pipe and fasten the clamp, 1.8L engine only.
  17. Install the top hose to the air intake inlet pipe, 1.8L engine only.
  18. Install the front air intake inlet pipe bolts, 1.8L engine only.
  19. Connect the negative battery cable.
 

Posted on Nov 23, 2008

  • 1144 Answers

SOURCE: 1998 Kia Sephia - replace the starter

To put it very simple, if you plan on keeping the vehicle for any real length of time, go to your local parts store and buy a manual. Haynes and Chilton make pretty good repair books. They have pictures, step by step instructions, safety tips, and generally, what tools are needed. A good book runs about $25.00. If you're gonna keep it, buy the book. There is no way anyone can answer you question in the proper details needed on this limited site.

Good Luck and check it out.

Posted on Mar 04, 2009

goofduck
  • 490 Answers

SOURCE: 98 kia sephia, will not start seems to be fuel pump

in the gas tank

Posted on Apr 16, 2009

  • 34 Answers

SOURCE: 2000 kia sephia replaced engine now no spark

are you getting fuel? a bad sensor or timing of f will cause the ecm to shut down fuel and spark

Posted on Jul 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace STARTER ON A 1999 KIA SEPHIA


Remove bolt holding main wire from battery. Remove nuts holding smaller wires to starter relay, remove starter mounting bolts then remove starter.

Sep 05, 2013 | 1999 Kia Sephia

1 Answer

Where is the horn loacated on my 2001 Kia Sephia looked every where cant find it


It is in an incredibly tight location underneath the passenger headlight,
directly behind the sidelight / indicator. Typically, the cables attach to the
top of it.
Looks like you
have to remove the headlight to get to it - removing the foglight
doesnt give you enough room.

Mar 16, 2011 | 2001 Kia Sephia

1 Answer

My 2001 Kia Sephia suddenly won't start.


even if your starter is out it would still click when you tried starting the car. so try replacing your battery first thats the most common problem for random starting. also look under the car you may need to jack it up. look under the intake manifold that is where the starter is check to see that everything is hooked correctly and that all the bolts are tightend securley and not loose on one side.

Apr 30, 2010 | 2001 Kia Sephia

2 Answers

1998 kia sephia starter


Its located just under the intake manifold. you will need to remove the exhaust pipe to access it. there is also an upper and lower intake manifold support bracket that will need to be removed as well to extract the starter.

Its in a tough spot.

Jun 17, 2009 | 1998 Kia Sephia

Not finding what you are looking for?
2001 Kia Sephia Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...