Question about Cars & Trucks

Open Question

Mitsubishi 4g64 vacuum diagram

I need a diagram of the vacuum hoses. Esp between the charcoal canister and the rear of the throttle body

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
chiquititas
  • 1010 Answers

SOURCE: 96 corsica error cod po441 no purge flow

Look, that code means:
P0441 - Evap emission control system Incorrect purge flow

so try to replace the emission control.

Posted on Jun 19, 2008

Ad
  • 1861 Answers

SOURCE: 1996 Toyota Previa code p0441

P0441 is Evap Emission Incorrect Purge Flow; the repair you are describing is easy, and should correct the P0441 restricition...I would anticipate no large problems.

Posted on Oct 07, 2008

  • 25 Answers

SOURCE: stalling no idle

Hi,if you want to now where is a leak ,start the car if is possible and spry the hosing pipes wen suddenly rpm increase you now where is the problem or ken be the trottle body!

Posted on Jan 16, 2009

toneman2121
  • 775 Answers

SOURCE: throttle body vacuum hose diagram

there should be one on the uderside of the hood oron the front rail as you open the hood

Posted on Mar 02, 2010

  • 395 Answers

SOURCE: Vacuum Hose

i think that one goes under the air filter cover look under it to see if theres a stem for a hose.

Posted on May 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to hook up vacuum hoses on throttle body and canisters


Be more sp?cific on manufacturer mod?le year engine

Jul 19, 2016 | Cars & Trucks

1 Answer

Definition of po1441 trouble code


P1441 Evaporative emission control system very small leak, positive pressure.
The problem may be that the purge control valve which is part of the charcoal canister has a slight leak.
If the control valve doesn't completely close, there will be flow during non-purge.
Vacuum drawn through the small hose to the charcoal canister is what opens the purge control valve.
Make sure that there is no vacuum to the smallest hose connected to the canister at idle.
Make sure the little hose is not kinked or pinched in some way that would hold vacuum to the purge control valve.
The canister is purged above 35 MPH, never at idle.

P0446 EVAP canister vent valve

The P1441 and P0446 are related.
When you fix the P1441 the P0446 may go away also or it may need a new vent valve.

Jul 22, 2014 | Cars & Trucks

1 Answer

1989 corvette emission hose routing


johnjohn2's diagram is not how the '89 Corvette vacuum lines are connected. In 1989 the vacuum source for the charcoal canister is a vacuum port on the passenger side of the throttle body. Also, the A.I.R. injection solenoids/valves were combined into a single unit.

Feb 16, 2014 | Chevrolet El Camino Cars & Trucks

1 Answer

I need a vacuum line diagram fo a 1996 Chevy Lumina, 3.1. One line that is not connected to anything, is located at the top of the engine.


Sorry I don't have the diagram, but I do have a diagram of the engine and component locations. Your vacuum system is fairly simple. You have a MAP sensor attached to the air cleaner. I have pasted a picture below. It has one electrical connector and one vacuum hose that goes to the intake manifold or the throttle body.
Behind the right headlight is your evap canister. This will have a hose or line running to the fuel tank. Then it will have another hose going to the purge valve. The purge valve should be close by and it has a connector plus another hose that goes to the intake manifold.
Then you have the PCV hose that goes from the PCV valve in the valve cover to the air cleaner or intake manifold. I think yours just has a hose from the air cleaner and the rest is internal.
There is one more vacuum hose, and that is the bog one that goes from the intake manifold (or throttle body--looks to me like there are a couple of vacuum ports on the back side of the throttle body, and there may be a "T" on one of the hoses) to the brake booster. It this one was off, the engine would not run, as the vacuum draw is large. Please let me know if you cannot figure it out from these instructions and provide a picture, if you can.

MAP sensor:
jturcotte_653.jpg

purge valve:
jturcotte_654.jpg

jturcotte_2455.gif
jturcotte_2456.gif

Oct 30, 2011 | 1996 Chevrolet Lumina Mini

1 Answer

Vacum Line Diagram for a 1974 Volkswagon Beetle.


These had few vac' lines . There is one from the carb' to the distributor and it was originally a steel line with rubber hosed ends and looped above carb' to stop fuel running into distributor vacuum canister.

On other models there was one for emission charcoal canister under rear fender and another from under carb on intake to clutch servo to operate the semi automatic transmission clutch..

EFI equipped engines are another story however and you will need a schematic ...... try www.thesamba.com..... this is a VW community with many posters who can help further.



Also late cars had lines running to gas tank as part of the charcoal canister system.

Dec 31, 2010 | 2002 Volkswagen Beetle Turbo S

2 Answers

Gas pump keeps tripping off often


you have a bad charcoal canister. Go underneath the left rear of the car, pull the big hose off the charcoal canister, and if charcoal come out of the hose, replace the canister. This is a common problem w/Hyundai and Kia.

Oct 14, 2010 | Hyundai Sonata Cars & Trucks

1 Answer

What cause this code


The code P1441 sets when the vacuum check switch detects a vacuum in the EVAP System when the purge solenoid is supposed to be closed.
Check for carbon contamination in the purge solenoid and vac sensor. The charcoal canister can fail and contaminate these components. Replace the canister or repeat failure will ensure.

Follow the purge hose until you find the canister,most likely Your 96 F body should be hiding in behind the left rear fender well. Remove the purge solenoid and lightly tap it onto a clean white towel.The carbon should show up and in most cases once the canister is replaced,the original solenoid can be reinstalled.

Good luck and hope this helps.

May 07, 2009 | 1996 Chevrolet Camaro

2 Answers

99 Camry, P0441 & P0446 codes


A. Diagnostics for PO441:

1. Remove Vacuum Hoses between EVAP VSV and Charcoal Canister and discard.
2. If there is a metal vapor pipe between EVAP VSV and Charcoal Canister, clean inside of vapor
pipe
3. Replace EVAP VSV and Charcoal Canister assembly with new parts.
4. Install new vacuum hoses between EVAP VSV and Charcoal Canister.


B. Diagnostics for P0446:

1. Inspect vacuum hoses and pipes between EVAP (Purge) VSV and Charcoal Canister for leaks.
2. Replace Vapor Pressure VSV and Canister.
NOTE :When performing diagnostics for an occurrence of a MIL "ON" condition, Diagnostic
Trouble Code (DTC) P0441 may be result of debris in Evaporative Emission Control System. This
may cause blockage of a vapor line, or a stuck VSV, as described in troubleshooting area of Repair
Manual.

Robert

Jan 29, 2009 | 1999 Lexus ES 300

1 Answer

1996 Toyota Previa code p0441


P0441 is Evap Emission Incorrect Purge Flow; the repair you are describing is easy, and should correct the P0441 restricition...I would anticipate no large problems.

Oct 07, 2008 | 1996 Toyota Previa

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...