Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: need the fuse box diagram
the fuse box lid normally has a diagram on it there is a fuse box under the dash on the driver side and there is one under the hood as well.and if it does not have a diagram stop by the dealer in the parts department and they can print you one if you have an owner manual there is one in there also.
Posted on Feb 11, 2009
Click on the following free direct Link. It has the correct Serpentine Belt Diagrams for your 1997 Mazda Protege depending on your Engine Size (1.5L or 1.8L) and Options (AC/No AC etc.).
Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.
Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them
Posted on Apr 01, 2010
Tips for a great answer:
Sep 02, 2014 | 1997 Mazda Protege
Oct 20, 2012 | 1998 Mazda Protege
Oct 29, 2011 | 1994 Mazda Protege
Mar 06, 2011 | 1994 Mazda Protege
May 30, 2010 | 1994 Mazda Protege
Mar 28, 2010 | 2003 Mazda Protege
Aug 09, 2009 | 1991 Mazda Protege
Jun 27, 2009 | 2001 Mazda Protege
43 people viewed this question
Usually answered in minutes!