Question about 1997 Hyundai Elantra

Open Question

Hyundai elantra gets stuck in 3rd gear - 1997 Hyundai Elantra

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: Hyundai Elantra GearBox Problem

balls

Posted on Aug 23, 2008

  • 158 Answers

SOURCE: My 2001 hyundai elantra's engine shakes when I

could be that the engine mounts are broken or a missfire

Posted on Apr 24, 2009

  • 99 Answers

SOURCE: 2000 Hyundai Elantra gear shift stuck in Park.

check for the brake switch if this doesnt work wont release from park if this ok then i will check the shifter cable check for power and ground

Posted on Aug 20, 2009

  • 1 Answer

SOURCE: 2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear

Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help

Posted on Jan 31, 2010

MauiRentaCar
  • 288 Answers

SOURCE: 2000 Hyundai elantra transmission delay, reverse going

Did you check the transmission fluid level? If necessary, add fluid. However you probably have a more serious problem. Take the car to a qualified transmission mechanic.

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dtc p1723


P1723 Auto transmission control relay - Stuck on.
This Code is showing that the main control relay of the transmission is stuck on. When that happens transmission goes in to the fail safe mode which is being stuck in 3rd gear to prevent damage to the transmission.

Oct 27, 2010 | 2000 Hyundai Elantra

1 Answer

Have a 99 sonata stuck in 3rd gear have code p173 replaced auto trans relay stil have problem what should i do


fuel trim malfunction is po173,not transmission problem.This would be a fuel related problem,but the stuck in 3rd gear is,it maybe a stuck governor,or valve in the valve body,try a product called lube guard at napa,it works wonders.

May 04, 2010 | 2000 Hyundai Elantra

1 Answer

My Hyundai Elantra 1998 model refuse to go into 3rd gear, can you assist me or what part do I need to buy to fix this probmlem


dear friend:if your vehicle do not engage 3rd gear it"s not a small job,the valve body needs to be removed and cleaned out and checked for sticky valves as that supply the pressure
to the drum to engage,clutches might be burnt
then the box must be stripped completely and recoditioned.

Sep 21, 2009 | 1998 Hyundai Elantra

1 Answer

2000 Hyundai Elantra gear shift stuck in Park. Car will start and runs fine. We just can't get the gear shift to move out of Park.


check for the brake switch if this doesnt work wont release from park if this ok then i will check the shifter cable check for power and ground

Aug 20, 2009 | 2000 Hyundai Elantra

1 Answer

Can't get car in or out of gear


Throwout bearing will need to be replaced most likely. Otherwise cluctch plate or fork may have stuck

Aug 06, 2009 | Hyundai Motor 2002 Elantra

1 Answer

Trans drops into 3rd gear won,t shift to 4th


DTC P0734 is "4th gear incorrect ratio" - that's your torque converter 'LOCK UP Clutch" It's worn out (or you're using the wrong Trans Fluid required by Hyundai - SPIII OR Both). The P1624 is simply the Trans Control Unit (computer) communicating to the Engine Control Module (ECM computer) MIL - on request signal to ECM = asking it to turn on "Check Engine" light. MIL = Malfunction Indicator Lamp. When the torque converter 'lock up" clutch slips or doesn't engage, the trans automatically returns to 3rd gear and stays there (it's called 'fail safe' mode) until you cycle the ignition key, then everything resets until the malfunction occurs again.
You'll need to have an AT (Automatic Transaxel) tester hooked up to verify this. Hyundai has a Service Bulletin specifically for "gear incorrect ratio' codes. If when you changed the trans fluid, was it done at a Hyundai Service Center? If not, someone may have installed the wrong fluid.

Jun 01, 2009 | 2000 Hyundai Elantra

1 Answer

Having difficulty shifting gears on 99 hyundai elantra


there is a pin in the end of the clutch that could be going out it happend to me last year if you don't get it check it could leave you in neutral stuck some were

Apr 07, 2009 | Hyundai Motor 1999 Elantra

Not finding what you are looking for?
1997 Hyundai Elantra Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...