Question about Vauxhall Astra

Open Question

Head bolt Torque settings for 52 reg 1.7cdti vauxhall Astra car

Head bolt Torque settings for 2002reg 1.7cdti vauxhall Astra car

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: what is the 98 isuzu rodeo head bolt torque

joyce, there are different specs for sohc and dohc engines. my advice is to get a Haynes manual from the auto parts store.

doug

Posted on Sep 01, 2008

Ad
the terrier
  • 94 Answers

SOURCE: head bolts torque settings

according to the manual its 22NM or 16lb/ft

Posted on Oct 26, 2008

  • 4 Answers

SOURCE: head bolts torque settings

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Posted on Feb 07, 2009

  • 14036 Answers

SOURCE: head bolt torque spec

STARTING OUT YOU HAVE TO REPLACE THE OLD BOLTS DUE TO STRETCHING.BESURE TO USE NEW BOLTS LUBRICATE NEW BOLTS IN OIL.BESURE TO USE TORQUE SEQUENCE GUIDE OR PHOTO.YOU GOING TO MAKE THREE PASSES * FIRST* PASS YOU TORQUE ALL HEAD BOLTS TO 12 TO 18 FT LBS * SECOND *PASS YOU TORQUE ALL BOLTS TO 26 TO 33 FT LBS.*THIRD PASS YOU TORQUE IT TO 44 FT LBS.THATS THE FINAL TORQUE.

Posted on Aug 16, 2009

  • 7353 Answers

SOURCE: head bolts torque settings for dogde neon 2002

assuming this is the "C" engine 8th digit on VIN plate. Use new bolts. torque first step to 25lbs, 2nd 50lbs, then 3rd 50lbs, then 1/4 turn.

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vauxhall astra auot code P1895 what does it mean


P1895 Engine control module (ECM), actual torque signal - circuit malfunctio

Sell this motor quick ,these are nice cars but suffer for these problems because the computer is bolted to the inlet manifold and gets too hot then cooks ,all these petrol engines from around this time suffer from this fault

Dec 17, 2013 | 1997 Chevrolet Lumina

2 Answers

Brown sludge on oil cap and a bit in oil tank


that is water in the oil. could be old oil or gasket on head has gone check to see if there is a oily residue in the water container. if not do an oil change and check the torque on the head bolts and re tighten them. there is some stuff you can buy that repairs seal in the engine. something like stop leak. don't use thin oil. engine is old now and well warn in, 30/50 or 20/40 will do fine. but dont use 10 or 15. oil as it is to thin

Apr 08, 2013 | Vauxhall Cars & Trucks

1 Answer

How to change heater lightbulb on vauxhall astra Reg 52


If you are talking about the interior heater controls, then you will need to remove the control mechanism from the dash. The bulbs are located on the back of it.

Nov 05, 2012 | Cars & Trucks

1 Answer

What is the torque settings on a vauxhall astra 2002 1.6l 8 valve petrol engine cylinder head


We do not have this make in the US so have no tech info on it. Sorry.

Jun 14, 2012 | Cars & Trucks

2 Answers

I have a 1998 Holden Astra eng noEL20B24119 and want to know the Head bolt torque settings and sequence. The engine is the transition model with twin tappet cover seals. has the torx star headed bolts.


I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:

10 6 2 3 7

9 5 1 4 8

the torque specs for the C20XE,C20NE,X20XEV were all
25nm(18lb/ft),-then 90 deg,-90deg,-90deg.
Z20LET were as above plus an additional 15deg.
Same data for smaller and larger engines(except a couple that were 45deg instead of 15)
Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused.
Put grease(graphite if you have it) under bolt heads and washers,oil the threads.
Usually the head sets come with the torque specs.
I hope this helps you.

Apr 02, 2011 | Honda Accord Cars & Trucks

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

1 Answer

Vauxhall astra v reg 1.6 8v air problem


either your blower motor has failed or your resistor the resistor is usually mounted on the blower motor on the front passenger side under dash

Jan 23, 2010 | 1995 Cadillac DeVille

2 Answers

I have a Y reg 1600 vauxhall astra estate with the cigarette lighter fuse blown. I have found the fuse box but do not know which fuse requires changing. Does anyone knw which one it is ?. Ignore the car...


Pull each fuser out if the fuse box lid doesn't show a cig on the fuse lid and see if it's blown. Replace the blown fuse. If all the fuses look good trace the lighter back to the inline fuser and replace.

Nov 19, 2009 | 1990 Yugo Gvc

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vauxhall Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you a Vauxhall Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...