Question about 2011 Cadillac CTS

Open Question

2011 cadillac cts instrument cluster removal

How do U remove the dash cover,to get to the instrument cluster.

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 173 Answers

SOURCE: 1997 cadillac eldorado instrument cluster removal

remove ac vents with flat head screwdriver . thair should be a 7mm bolt in each vent holding tha dash pad on remove them. remove the trim going to head liner from the dash pad. use a 7mm to remove the bolts holding the cluser in place should be one each side and 3 across the back . disconnect the wiring harness and your done. also disconnect the negative batery cable when doing this

Posted on Apr 03, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the 3.2 v6 CTS motor have to be pulled out of car to replace freeze PLUGS on block


2003 Cadillac CTS Spark Plug Change 3.2L V6 - YouTube

? 3:08
www.youtube.com/watch?v=8Pzcl-hJ9xQ
May 26, 2011 - Uploaded by Sandman Himself
2003 Cadillac CTS Spark Plug Change 3.2L V6 ... Cadillac CTSIntake Manifold Removal and Valve Cover Gaskets ... CheckEngine Light Flashing? ... CHANGING SPARK PLUGS AND WIRES GM 3.1/3.4 V6 - Duration: ...

Sep 28, 2015 | Cars & Trucks

1 Answer

How do I remove the intrument cluster from the dash


Carefully....
unbolt steering colum below dash. Let it lie I'm seat, remove trim cover to cluster remove the 4 bolts on the edges.
pull straight out and remove harnesses and speedo cable if required.

May 01, 2014 | 2000 Buick Regal

1 Answer

Dash board blinking on and off (white light instrumentation part only how to fix? also none of the instruments are working.


you will need to have the whole instrument cluster repaired....any GM dealer can take care of this

Dec 03, 2012 | 2008 Cadillac Cts

1 Answer

Fuel status bar fell iinto dash


Remove the screws to dash. Pull out cluster. Once cluster is removed, removed bolts holding front plastic cover on the instrument cluster, Once plastic is removed, you will have access to reinstall the arm that fell off.

Jun 05, 2012 | 2003 Lincoln LS

1 Answer

Dash board speedometer, rpm gauge and all other instruments turn off. If I beat on the dash sometimes it all turns back on, but mostly not! Also when instrument panel turns off, door locks won't...


Sounds like the instrument cluster main wiring harness pins on the instrument cluster circuit board. How are you with a soldering gun? Just re-flow the solder on the 13 pins of the main wiring connector on the instrument cluster circuit board, and you should be fine. To get there, you need to remove:
- the lower dash panel under the steering wheel (5 screws),
- instrument bezel cover around the steering column (2 screws),
- instrument cluster cover (3 screws to my recollection),
- and then instrument cluster (4 screws)

If the problem returns or persists, then consider re-flowing the solder on the #331 resistor on the body control module circuit board - there is only one of these on the circuit board. To get the bcm out, remove:
- lower dash panel under steering column (5 screws)
- metal kick plate - 10 bolts and 1 screw (although not necessary, you can get more room by removing the lower metal dash bracket as well - 5 bolts)
- three 10mm bolts holding the bcm in place
- 2 wiring connectors on the bottom of the bcm
- 4 wiring connectors on the front of the bcm - You need to back off the connectors with a nut driver - they were either 11mm or 12 mm

Then:
- remove the metal bcm cover - 3 small bolts
- remove the circuit board - 4 screws
- use a magnifying glass to find the #331 resistor
You're probably best off replacing this resistor while you have everything accessible. (this is apparently the standard re-build fix for these bcm's) I didn't have a suitable replacement, so I just re-melted the solder. After re-installing everything, all my previous dash board gremlins disappeared.

Give yourself 2-3 hours (well maybe 4) for all this.

Sep 18, 2011 | 1997 Dodge Caravan

1 Answer

How to replace the dashboard bulb in a 1999 plymouth voyager


Which light is out? Is it an instrument cluster light, or one on the temperature or A/C cluster? It it's an instrument cluster light, here is the process: (I'm assuming the 99 is similar to the 98) Remove the bottom dash panel under the steering wheel, remove the instrument cluster cover around the steering column. This will reveal the screws that hold your instrument cluster cover in place. Remove this cover and you can then see and remove the 4 screws holding your instrument cluster in place. Pull your instrument cluster out, remove the main wire connector, then you have access to all the instrument cluster lights on the back side. Hopefully you remember which one is out!

Aug 23, 2011 | 1999 Plymouth Voyager

1 Answer

98 Town Car, how do I change dash lights, (fuel gauge bulb)


  1. Disconnect the negative battery cable.
  2. Remove the instrument cluster.
  3. Remove the retaining screws for the instrument cluster lens and cover assembly. Remove the cover and lens.
  4. Remove the retaining screws for the gauge or warning lamp to be replaced and remove the gauge or warning lamp. To install:
  5. Place the gauge or warning lamp into place and tighten the retaining screws.
  6. Install the instrument cluster lens and cover assembly.
  7. Install the instrument cluster.
  8. Connect the negative battery cable.

Feb 04, 2011 | 1998 Lincoln Town Car

2 Answers

How do I change the dash lights in my 1997 ford crown victoria? I took out all the screws but still cant get the cover off to get to the bulbs. URG!!!


REMOVAL & INSTALLATION Conventional Cluster Fig. 1: Remove the trim screw covers on the driver's and . . . 89606p41.jpg
Fig. 2: . . . passenger side of the instrument cluster 89606p42.jpg
Fig. 3: Remove the upper trim panel retaining screws 89606p43.jpg
Fig. 4: Remove the headlight switch knob 89606p44.jpg
Fig. 5: Detach the electrical connectors for the trim panel and remove it from the vehicle 89606p45.jpg
Fig. 6: Remove the instrument cluster retaining screws from either side of the cluster 89606p46.jpg
Fig. 7: Remove the transmission range indicator cable 89606p47.jpg
Fig. 8: Slide the cluster out and detach the electrical connectors and . . . 89606p48.jpg
Fig. 9: . . . . remove the instrument cluster from the vehicle 89606p49.jpg
  1. Disconnect the negative battery cable.
  2. On 1989 vehicles, disconnect the speedometer cable. On 1989 Crown Victoria and Grand Marquis, remove the headlight switch knob and shaft assembly.
  3. Remove the instrument cluster trim cover attaching screws and remove the trim cover.
  4. Except 1992-98 Grand Marquis, remove the lower steering column cover retaining screws and remove the lower cover. On 1992-98 Grand Marquis, remove the knee bolster retaining screws and remove the knee bolster.
  5. On all except 1992-98 Grand Marquis, remove the lower half of the steering column shroud.
  6. Remove the screw holding the transmission range indicator column bracket to the steering column. Detach the cable loop from the pin and cane shift lever. Remove the column bracket from the column.
  7. Remove the 4 cluster retaining screws. Disconnect the cluster feed plugs from the receptacle and remove the cluster assembly.
  8. Installation is the reverse of the removal procedure.
Electronic Cluster NOTE: The electronics within the electronic instrument cluster are not serviceable. In the event of an electronic failure, the entire instrument cluster must be replaced or returned to the manufacturer for repair.
  1. Disconnect the negative battery cable and set the parking brake.
  2. Unsnap the center moulding on the left and right sides of the instrument panel. Remove the steering column cover and column shroud.
  3. Remove the knobs from the auto dim and auto lamp switches, if equipped. Remove the 13 screws retaining the instrument panel and pull the panel out.
  4. Move the shift lever to the 1 position, if required, for easier access.
  5. Detach the electrical connectors from the warning lamp module, switch module and center panel switches, if equipped.
  6. Remove the instrument cluster carefully so as not to scratch the cluster lens. Detach the electrical connector from the front of the cluster.
  7. Disconnect the transmission range indicator assembly from the cluster by carefully bending the bottom tab down and pulling the indicator assembly forward.
  8. Pull the cluster out and detach the electrical connectors on the rear of the cluster. Remove the instrument cluster.
  9. Installation is the reverse of the removal procedure.
prev.gif next.gif

Sep 18, 2010 | Ford Crown Victoria Cars & Trucks

1 Answer

1997 cadillac eldorado instrument cluster removal


remove ac vents with flat head screwdriver . thair should be a 7mm bolt in each vent holding tha dash pad on remove them. remove the trim going to head liner from the dash pad. use a 7mm to remove the bolts holding the cluser in place should be one each side and 3 across the back . disconnect the wiring harness and your done. also disconnect the negative batery cable when doing this

Feb 15, 2010 | 1997 Cadillac Eldorado

1 Answer

How can I take the dash cluster /screen out on my Audi A4


You must remove instrument cluster out of car. After that you can take the instrument cluster screen out.

1ad838f.png
For removing instrument cluster out of car you must remove left bottom plastic cover above pedals and upper plastic cover behind steering wheel, see picture below.

e5b3ab4.png
Refit all in reverse order.




Dec 05, 2009 | 2002 Audi A4

Not finding what you are looking for?
2011 Cadillac CTS Logo

Related Topics:

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...