Question about 2002 Chrysler Sebring

Open Question

Replace the oil pressure sensor in 2002 chrysler sebring

The oil pressure sensor is leaking. This is a repetitive problem

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 202 Answers

SOURCE: 2002 Chrysler Sebring Oil pressure light

Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2002 Chrysler sebring plugs getting wet and refuse to start is it a faulty map pressure sensor?


humidity in the cylinders would be more related to the erg valve, and there are a whole lot more sensors other than the (intake) manifold absolute pressure sensor involved in producing a lean fuel mix/heavy air mix scenario- TPS, MAF, VAF.

if the engine is not starting and there was water in the cylinders, could you have a blown head gasket? any exhaust drip or white smoke, oil filmed coolant or bubbly oil on the dipstick?

Dec 29, 2014 | 2002 Chrysler Sebring

1 Answer

How to replace Fuel Injection Pressure Regulator on 2002 chrysler sebring


Fuel Pressure Regulator Removal & Installation To Remove:
  1. Spread tangs on pressure regulator retainer.
  2. Pry fuel pressure regulator out of housing.
  3. Ensure both upper and lower O-rings were removed with regulator.
To Install:
  1. Lightly lubricate the O-rings with clean engine oil and place them into opening in pump module.
  2. Push regulator into opening in pump module.
  3. Tabs hold regulator in housing.
prev.gif next.gif

Feb 12, 2011 | 2002 Chrysler Sebring

1 Answer

1999 chrysler sebring oil pressure drops when the car warms up but wheh you mash the gas, the pressure rises.the car use to shut off when the oil pressure droped but now it dosent. i replaced the oil...


I think your sensor may be affective. The same thing happens to my sebring and it has been like that forever. You can check the oil pressure sensor and see if it needs replaced.

Feb 05, 2011 | 1999 Chrysler Sebring

1 Answer

Oil leak at rear main oil seal 2002 chrysler sebring. it's leaking oil


To stop the leak it will have to be replaced and a speedy sleave will have to be insalled on the crank surface this is not a little job and should be taken to a shop to fix. The transmisson has to be unhooked and backed away to work on it. For a shop to do it it's about 6 hours work Guessing cause don't know if it's 4 or v-6. Good luuck, If the seal fails all the way it can pour oil out fast enough to damage the engine if you let it go.

Sep 30, 2009 | 2002 Chrysler Sebring

2 Answers

Oil preasure light comes on


Your oil sensor may be faulty, or your may have a leak since you said the fluid level is okay.

Sep 23, 2009 | 2001 Chrysler Sebring

1 Answer

Oil light on while driving 2002 Sebring


2.7 ? This motor has oil problems if not changed every 3000 miles. Put a chrysler filter on it and the correct weight of oil, never use a fram oil filter.

Jul 02, 2009 | 2002 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Oil pressure light


Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.

Mar 26, 2009 | 2002 Chrysler Sebring

3 Answers

2000 Chrysler Sebring V6 oil pressure light comes on when oil is warm. Replaced the seals and value cover and still the light comes on while Idel now drops below 5 rmp


Here is how I fixed the low oil pressure light problem without using any parts, only the labor to remove the oil pressure sensor is needed. I have an 02 seabring convertible 2.7L engine and I was having the same problem with my oil light coming on at an idle. I bought a new sensor replaced the old one and had the same problem. I than got a test kit and tested my oil pressure. It was very good, never lower than 11 PSI hot at an idle. I was reading about the wire connector modification, but I had an 02 and this mod came out in 98, surely Chrysler incorporated this mod on its newer vehicles. Well after checking more they did not and this is what turned me off on Chrysler products forever. For a manufacturer to produce a vehicle with a known defect and a modification fix and not incorporated this modification on its newer vehicles is inexcusable. After reading that the modification was to stop pressure build up in the sensor housing I decided to make a pressure release hole in the sensor housing. I took my old oil pressure sensor and using a 1/8 inch bit I drilled a small hole at the base of the plastic sensor tower. I put the old sensor in and drove for a week, no problem with my light coming on. To test further I took the new oil pressure sensor I bought and drilled a hole in it. Put it in and I've been driving for months and no problem with my oil pressure light coming on now.

Mar 07, 2009 | 2000 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...