Question about 2005 Ford Escape XLT

Open Question

Reset oil change light ford escape 2005 - 2005 Ford Escape XLT

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

greg_margo
  • 1959 Answers

SOURCE: How do I reset oil life % change oil message on my

The procedure is as follows:

  • Turn ignition to the "ON" position.
  • Press "SETUP" button.
  • Press "RESET" button. Press and hold "RESET" button until "IF NEW OIL HOLD RESET" is displayed.
  • Press and hold "RESET" button until "OIL LIFE RESET TO 100%" is displayed.
I hope this answers your question. Thank you for using Fixya and please remember to return to rate the answer you've just been provided. Thank you!



Posted on Nov 19, 2009

SOURCE: Ford Explorer Oil change rest message

no...not helpful at all really awful .

Posted on Jul 09, 2008

  • 1 Answer

SOURCE: How do you change a license plate light on a 2005

I just replaced one of the license plate lights on my '05. Gently push the housing toward the center of the car as you pry under the outside edge, and it will pop out. Remove the socket from the housing by twisting it 1/4 turn. The bulb is the push-in type commonly used for marker and dash lights. I always spray some Radio Shack electrical contact cleaner into the socket before inserting a new bulb - helps make a good contact and prevents corrosion. Hope this helps!

David

Posted on Mar 08, 2010

iadame
  • 676 Answers

SOURCE: reset change engine oil light 2009 ford escape xlt

press reset button until engine oil life appears, then hold reset until it resets to 100%

Posted on Mar 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The "Change Oil Now' light came on and I had the oil changed and the air filter replaced but the light won't go off. How do I turn it off? Thanks.


Press the setup button until you see a message that says something like oil life XXX% pres reset if new oil. Press the reset button. it should change to if new oil hold reset button. Press and hold the reset button until the display changes to 100%

Oct 18, 2010 | 2005 Ford Escape

2 Answers

Labor 2005 escape fuel pump


Back-yard mechanic $150. to $200.00 labor
Dealer- about 500.00 (Must remove tank)
If the fuse isn't blown it probably isn't fuel pump.  Check for voltage at connector by tank.  Check Fuses and Relay. (can swap relays if the same numbers)
Bang the fuel tank as someone turns key off and on - dirt in fuel pump may dislodge itself and good to go!
Check Crank-Sensor - and low oil may cut off fuel! May be this sensor.
Some Fords have a Master Reset on Firewall.
Not a Ford person but may give you some clues.

Jun 07, 2010 | 2005 Ford Escape

1 Answer

Turn off change oil light in a 2009 Ford Escape Hybrid


PLEASE TELL ME ABOUT MANUAL PROCEDURE OF RESET OF THE MEMORY OF THE FORD ESCAPE HYBRIDE 2006 AFTER REVISION

May 10, 2010 | 2007 Ford Escape Hybrid FWD

3 Answers

Reset change engine oil light 2009 ford escape xlt


This is how it works on my 2010 Escape. There are 3 buttons to the lower left of your steering column (Info, Setup, and Reset):
1) when it's displaying the "oil change required" message, hit the "reset" button to get rid of the message2) then hit the "Setup" button twice and you'll see the "oil life" screen, which is now at "0%". It tells you what to do next (i.e. "hold reset" until it say 100%).

Mar 14, 2010 | Ford Escape Cars & Trucks

1 Answer

My 2005 escape is burning oil. about 3 quarts


If it has high mileage try running heavier wt oil.

Jan 20, 2010 | 2005 Ford Escape

2 Answers

2005 Ford Escape, blinking O/D light, etc.


You may be losing the speedo cable. Others have reported the light flashing related to this. You may also want to check tranny oil condition (color should be clear red, and smell should not have a burnt smell to it)...

Sep 08, 2009 | 2005 Ford Escape

3 Answers

2008 Ford Escape oil change message


to reset the oil monitoring system to 100% , press SET control to access the system check functions , press and release the SET control to display OIL CHNG XXX% HOLD SET NEW , press and hold the SET control for 2 seconds to display OIL CHANGE SET TO 100% , oil life is now reset . thank you !

Dec 30, 2008 | 2008 Ford Escape

Not finding what you are looking for?
2005 Ford Escape XLT Logo

Related Topics:

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...