Question about 2008 Chevrolet Cobalt

Open Question

Serpentine belt diagram for chevy cobalt - 2008 Chevrolet Cobalt

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: serpentine belt replacement 1994 chevt silverado 5.7 lt

call your local autozone and the will tell you over the phone or fax you a copy

Posted on Feb 14, 2009

Ad
michigan man
  • 3533 Answers

SOURCE: belt replacement

what i do is draw me a diagram before i take the old belt off you can also ask the auto part store where you get the new belt and for the most part they have a diagram for a long time came on the box with the new belt in it.

Posted on Apr 13, 2009

andreousb
  • 4 Answers

SOURCE: need diagram for instaalling serpentine belt on

Picture is for the carbureted model but has the same patter as my fuel injected model. It's actually pretty easy to see how it goes. If the pully has groves then the grove side of the belt will fit right in it prefectly. If it's smooth then the back side of the belt with run along it. To loosen the belt tensioner do two things. first in the picture below you will see in the top middle you will see the tensioner. The back of the belt runs along it. You will notice that it looks like a solid peice. loosen the top slighty with i believe a 15mm. After that connect to the pully attached to it and pull back to the passenger side until you can slid the belt off the alternator. put back on in reverse order. really really simple once you do it. good luck
11f4983.jpg

Posted on Oct 23, 2009

  • 468 Answers

SOURCE: 2003 Chevy Suburban-replace alternator

Ok, Alternators are a breeze on these things. There are two bolts that hold it on, and 2 sets of wires. If you haven't taken anything apart yet, and the belt is still on it, here's what to do. You will want one of those rubber or elastic bungee cords, about 2 and a half feet long(this makes it easy). Hook that bungee cord to your hood somewhere, so that it hangs down. Hook the other end on the serpentine belt right next to the alternator pulley. If you need to prop the hood up with a stick or something to keep it up, do so. Pull up on the belt, and watch the pulleys. The one that probably has a plastic pulley on it that moves up and down(this is the tensioner) is the one that you'll put a deep well socket in the middle of with a ratchet, and turn counterclockwise. This will make the belt go loose. Now you can work the belt off the alternator pulley, and once you get it off, the bungee cord will keep it in place, so you don't have to look at the diagram. Otherwise, if it comes off, there is a sticker just under the hood either on the fan shroud or the radiator support that has the belt diagram. Now, you can disconnect the battery, pull the rubber boot down off the nut and post on the back of the alternator, remove the nut and wire, and then unhook the wire from the side of the alternator. Now, you can remove the two bolts that hold the alternator on. You Will need to pry the alternator off at this point, as it fits really tightly in place. A socket extension or a large flat screwdriver works really well for this. Once you get it off, put the new one on exactly as you took the old one off. Note, you will have to release your tension on the tensioner at some point; i just ease it down, or if I can pull it off, wedge it somewhere where it won't loosen very far. Remember, on the tensioner, you're not trying to take the nut off. All you're doing is using it to move the tensioner arm. That's all there is to this job. Sometimes it can be stubborn with the prying part, especially getting it into place. Hope this is what you're after, and if you need more info, leave a comment for me.

Posted on Feb 22, 2010

Testimonial: "Great advice on the bungee cord!! Well written advide and easy for a novice to follow. Thanks"

  • 14036 Answers

SOURCE: I need the serpentine belt diagram for a chevy Express Van

DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.

Posted on Mar 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I get a belt routing diagram for a 2006 Chevy Cobalt? Is there only one belt?


http://www.yourcobalt.com/forums/install-guides-diy/18532-how-change-serpentine-belt-2-2-a.html
This link has pictures of each pulley. Hopefully it is enough for you to finish your job

Aug 29, 2011 | 2006 Chevrolet Cobalt

1 Answer

Diagram for the serpentine belt


Chevy made at least five different engines for pickups in 1989, and with a lot of accessory options. Check this link and select your pickup and engine size. When you get the listing of belts, if you see a small camera icon in the left column, click on it and you will see the diagram of the routing.

May 27, 2010 | 1989 Chevrolet C1500

1 Answer

Change a serpentine belt on a 1996 chevy cavalier


Diagram should be under the hood
The auto tensioneris down low and dificult to get to.
If it has not been changed in a while you will need a long thin push stick and a serpentine tool.
Push on the belt hard at the auto adjuster and pop the belt off the smooth pully (located top).
hook up the serpentine belt tool and then mount the new belt

Jan 17, 2010 | 1996 Chevrolet Cavalier

1 Answer

I have a 1997 Chevy Cheyenne C2500 w/5.7L V8, 2 wheel drive. The serpentine belt broke and I need a diagram to replace it. Any help?


check your frame for the diagram or go to google images look up 1997 Chevy Cheyenne C2500 w/5.7L V8 serpentine belt diagram they will have it might not be the first pic

Jan 16, 2010 | 1997 Chevrolet C2500

1 Answer

Diagram of Serpentine Belt 1998 Chevy Cavalier


diagram should be on the radiator shroud / top of radiator

Jan 10, 2010 | 1998 Chevrolet Cavalier

1 Answer

95 chevy impala 5.7l serpentine belt diagram


If you will look under the hood around the radiator or on the underside of the hood it should be on a sticker there for you to look at.  

Dec 23, 2009 | 1995 Chevrolet Impala

1 Answer

How do i change the serpentine belt on my 1999 chevy tracker


First, keep this diagram around as you will need it to route the serpentine belt when you reinstall it. There may also be a diagram under the hood by the radiator.
7e98dff.jpg Next, follow this link and watch the video that shows you how to replace a serpentine belt...
http://www.wonderhowto.com/how-to/video/how-to-inspect-and-replace-your-car-s-serpentine-belt-267229/

Nov 14, 2009 | 1999 Chevrolet Tracker

2 Answers

Serpentine belt diagram for 2003 chevy impala


send an email to chuckie12_87@yahoo.com and I will send the diagram to you

Jun 23, 2009 | 2003 Chevrolet Impala

1 Answer

What is the serpentine belt routing on a 2006 chevrolet cobalt?


there is a diagram of the belt routing under the hood of the car. I hope that helps you out.

Nov 21, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...