Question about 1995 Nissan Pickup

1 Answer

1995 nissan xe truck rear tail light out

I can't figure out how to take off the back lens cover for my nissan pickup; no screws and i don't want to brake the plastic by prying off.

Posted by on

  • mynissan Oct 26, 2008

    i found 2 bolts inside the tail gate that i didn't think were related; strange!

  • Anonymous Dec 03, 2008

    changing tail light out

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

OK God is here....ya have to peel the bedliner open and you will find 2 10mm bolts.....they release the assembly :)

Posted on Nov 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the back up switch located on the transmission on 95 nissan xe-v6 4wd. Pick-up


Amy, Could not find your exact truck or transmission, the links have pictures etc, to show what the sensor looks like and approximate location where sensor will be screwed into transmission.

"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

nissan xterra frontier reverse light sensor back up lamp switch replacement

2001 nissan frontier reverse light switch Google Search

http://www.autopartswarehouse.com/sku/Nissan/Pickup/Beck_Arnley/Back_Up_Light_Switch/1995/XE/6_Cyl_3-dot-0L/201-1668.html

Jun 09, 2016 | Nissan Cars & Trucks

2 Answers

How to get in to replace a rear tail light stop light on a 1984 Nissan Pickup. Where are the bolts, or screws that release the plastic covers?


CHECK INSIDE THE TRUCK QUARTER PANEL FROM INSIDE THE TRUCK BED AT BACK OF THE LIGHT COVERS. MY IS A 2000 FRONTIER AND I HAD TO REMOVE BEDLINER TO GET TO THE SCREWS. NOT A VERY BIG OPENING ON THE BACK OF THE LIGHTS.

Jun 03, 2014 | 2000 Nissan Frontier

1 Answer

How do you remove the tail light lens cover for a 1987 Nissan Pickup truck


You can't remove the lens cover. The tail lights are molded as one piece. If you want to change the bulbs, there should be an access panel inside the truck box right behind the tail lights that gives you access to the bulbs. There are also screws to remove the entire tail light assembly if it needs replacing.

Sep 05, 2011 | 1987 Nissan Pickup

1 Answer

Removel of the axle from the rear axle on a 1995 nissan pickup short bed xe 4cly 5speed more off what how to go about it ?


You will have to get a book. Some trucks, they just pull out, others, you have to pull the pins out of the rear differential. Jack the truck up on the one side so the oil doesn't come flooding out your way. Pull the bolts off, then you have to snatch the axle out with a chain bolted to the lug studs,or a dent puller, It isn't an easy job. Replace the seal and the bearings, and tap it back in, hope this helps.

Apr 16, 2010 | 1995 Nissan Pickup

2 Answers

How to get in to replace a rear tail light stop light on a 2000 frontier Nissan Pickup. Where are the bolts, or screws that release the plastic covers?


look for screw inside the bed area, adjacent to the tailight covers. Remove two screws, and the taillight assembly pulls out

Aug 06, 2009 | 2000 Nissan Frontier

1 Answer

Remeove rear combination tail light cover 2006 Nissan XTERRA


thode screws hold the lens or the light assembly? Allow for the whole tail light to come out and the bulb plug will be accessible. I never had the privilage. But how the lens fits will tell you. If the lens goes overthe edges, the whole unit comes out, lens is sealed. Good luck

Jun 03, 2009 | 2006 Nissan Xterra

1 Answer

Tail light assembly


If you look inside the trunk, you will need to undo the panel inside trunk to gain access to the bolts that mount the tail light assy's.

Jan 09, 2009 | 2002 Nissan Sentra

2 Answers

I have a brake light out.How do you get to those things. This is a 1998 nissan frontier


do you have a bed liner?? if so, you need to move the bed liner away from the rear lights in back to access the screws that hold the tail light in. on the side of the bed right by the tail light are 2 screws holding the light in. remove screws, remove tail light replace bulbs, re-assemble.

Jul 22, 2008 | 2005 Nissan Frontier

Not finding what you are looking for?
1995 Nissan Pickup Logo

Related Topics:

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...