Question about 2003 Chrysler Town & Country

1 Answer

The fan is stuck blowing on high, the knob turns etc... but the fan and condenser run full blast

The fan motor is stuck on high. the knob turns and the lights move when you turn it. the fan motor and condenser run continuously. this began when I turned the ignition off and restarted quickly.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chrysler Master
  • 2,620 Answers

Check the connection at the heater blower motor resistor.Wiggle or pull connector off and look for a melted pigtail these get very hot and usally are the cause of fan motor problems.Its located on passenger side of heat duct mounted with 2 screws.

Posted on Feb 17, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is causing my 2008 trailblazer heat/ac to blow on unexpectedly


it sounds like the fan resistor is faulty location of it will be attached to the fan structure or if not trace the red and black power wires coming from the fan it will be mounted close to the fan

Mar 16, 2016 | 2008 Chevrolet Chevrolet TrailBlazer LT

1 Answer

Cooling fan motor gets hot when running high speed why


Check the bearings. If the friction is high the fan will not run at rated speed. When it runs slower it uses more current and gets hotter...

Disassemble, clean and lubricate to make sure fan runs full blast and does not burn out.

Or if the fan has two windings, one for starting and one for running it is possible that the high speed run winding has some shorts in it resulting in more current and more heat.

Oct 13, 2015 | Cars & Trucks

1 Answer

Turned the heater and car off but fan keeps blowing - now cold air - at full blast. had to disconnect battery to get it to stop


car has electronic issues
tow to an auto electrician or impala specific workshop

burnt out fan motor
faulty climate control wiring or sensor
faulty relay
check if direction flap motors or actuators are working

index-olcg2atjfgvqeua02cz5euu5-5-0_0.jpg

ttx-olcg2atjfgvqeua02cz5euu5-5-1.jpg

Apr 05, 2017 | 2004 Chevrolet Impala

1 Answer

Water is bubbling runs hot when running ac in place for a while r stuck in traffic


sound like you have a radiator fan problem. do this, turn your car on, with your ac on and open your hood. look at your radiator fan and see if its going full blast. if not take a wrench or anything solid and tap the fan motor. if it moves faster after you tap it ,replace the motor

Aug 03, 2013 | 2008 Dodge Charger

1 Answer

The fan that controls the A/C and heater is stuck in the on position & running full blast. Puching the off button or manually puching the fan buttons does not do anything. The fan continues to run full...


Sounds like a problem with the fan switch. If you can find the fuse for the blower motor, you could pull the fuse to stop the fan until you can get the problem fixed.

May 09, 2011 | Infiniti QX4 Cars & Trucks

2 Answers

2005 dodge 3500 ram / noise from a/c on passenger side. Very loud when fan is on full blast - not much ac blowing out.


Sounds like you either have something stuck in the blower motor (leaves, pine needles, etc?) or the blower motor bearings are worn out.

Apr 26, 2010 | 2005 Dodge Ram 3500

2 Answers

1995 S10 heater control when turned on doesn''t work the heater. Culd it be fuse, heater core?


Hello,
If you are refering to the fan it could be the fuse or the fan resistor or the fan motor or the high blow relay or the wiring in that order of possible causes.

I hope this helps.

Roy

Nov 06, 2009 | 1995 GMC Sonoma

1 Answer

The fan hardly blows out, even when on full blast


check were the blower is at that panel were the air runs thru it gets full of dirt you might want to clean it out that will help.

Jun 11, 2009 | 1994 Ford Escort

1 Answer

Fan blowing while car is off


If the A/C knob is not set to 0 at the time ignition was off, the fan could run for a little and then off itself.

May 17, 2009 | 2002 Volvo S60

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...