Question about 2008 Chrysler Sebring
Posted by Anonymous on
I have the parts already how much is the labor is to put back bumper on and replace tail lights I already have all the parts
Posted on May 27, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 Chrysler Sebring problems
That dealer is ripping you off. Ask around to find a good repair shop.
Just for the heck of it, I called an auto parts store, and the cost of the timing belt is around $36.00 and the sensor is about $100.00.
Different shops charge different labor rates. But it shouldn't cost anywhere near that dealer. Good luck.
Posted on Mar 13, 2009
I do not believe that the balljoint is causing the squeak. Take your car to an independent mechanic that you trust. dealerships are notorius for mis-diagnosing (it begins with the intake person describing the problem wrong).
More than likely, the squeak is coming from a worn rubber bushing or mount. Check the exhast pipe hangers for worn rubber. Also check the anti-sway bar bushings and the motor mounts. You should be able to replace these with ordinary tools (assuming you have safe access to the botom of the car - i.e. jack stands). Also check the control arm bushings (these would require an expert, or a pro to replace).
If the balljoint boot is cracked, you can prolong the ball joint life by keeping it well greased. If grease is oozing out the crack, then the balljoint is protected. Replacing the balljoint boot requires separating the wheel spindle from the control arm and can be very dangerous because of the strut spring. This should be left to the expert, or professional mechanic. Also, if the ball joint is squeaking, it needs to be replaced.
If you still want to tackle this yourself, buy a Chilton or similar book (under $10) specifically for your car. They have good instructions and diagrams.
Posted on Jun 29, 2009
SOURCE: Access to front door speakers
on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.Then you can get to your speaker
Posted on Sep 14, 2009
the reason why ur car squeaks is the ball joint i have a chrysler and same thing happened n my friend knows a lil bit bout cars had the same prob with hiss car and then the tire came of came to find out it was the ball joint causing the squeaks its not bearings or ur brakes car places told me same thing didnt fix it it is 100 percent ur ball joint and when u ask for the part ask for a lower control arm with a ball joint and install it by whoever
Posted on Nov 09, 2009
Tips for a great answer:
Feb 06, 2015 | 2008 Chrysler Sebring
Dec 24, 2014 | 2004 Chrysler Sebring Sedan
Jan 13, 2014 | 2008 Chrysler Sebring
Jun 17, 2017 | 2008 Nissan Sentra 2.0
Sep 17, 2012 | 2005 Chrysler Sebring Sedan
Jul 28, 2012 | Chrysler Sebring Cars & Trucks
May 23, 2011 | 2006 Chrysler Sebring
Jun 22, 2010 | 2008 Chrysler Sebring Convertible
431 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: