Question about BMW 318i

1 Answer

Removal and installation of serpentine belt pully on bmw 318 i

Posted by on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • BMW Master
  • 17,970 Answers

I suggest visit this links with interesting information about this job:
- E36-Belt-Replacement/E36-Belt-Replacement

You have to find your belt tensioner, pop the cover off of it, hook a socket and ratchet to it and move it to release the tension off of the belt. While you are holding the belt tensioner, you can slip the belt off of one of the pulleys and then release the tensioner.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 17, 2012

  • ZJ Limited
    ZJ Limited Feb 17, 2012

    Hi there:

    I suggest visit this links with interesting information about this job:

    - E36-Belt-Replacement/E36-Belt-Replacement



    You have to find your belt tensioner, pop the cover off of it, hook a
    socket and ratchet to it and move it to release the tension off of the
    belt. While you are holding the belt tensioner, you can slip the belt
    off of one of the pulleys and then release the tensioner.



    Hope this helps; also keep in mind that your feedback
    is important and
    I`ll appreciate your time and consideration if you leave some
    testimonial comment about this answer.



    Thank you for using FixYa, have a nice day.

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

eitan
  • 291 Answers

SOURCE: diagram for serpentine belt for 2002 BMW 525i

4fb4db0.jpg
An image of a serpentine belt, hope this will help you,
Eitan.

Posted on Jun 10, 2008

  • 178 Answers

SOURCE: serpentine belt

hello two things you can do under your hood look very good ford usually has a routing diagram mounted on the top support of your radiator or off to the side it will be a pitcher of a front of a motor with pullys should show you with and without ac routing if not dont panic go to part store like auto zone get your self a haynes manuel that covers your year car the serpitine routine should be in there for your motor goodluck please rate

Posted on Oct 02, 2008

dr_layinlow
  • 60 Answers

SOURCE: need to install new serpentine belt on 96 Jetta 2.0

that is your belt tensioner!! You pull that back when you are gettin ready to finnish putting your belt on the last pulley!! Follow diagram under hood for your specs on motor!!

Posted on Dec 07, 2008

p_murfy
  • 63 Answers

SOURCE: need to install belt

i made this with paint. hope it helps. typically on a bmw the belt goes between the water pump and crank pulley to the tensioner; if this is a 99 to 06 ish 3 series and some 5 s you will be goode2f7e32.gif

Posted on May 03, 2009

  • 9 Answers

SOURCE: 2000 isuzu rodeo removal and installation of serpentine belt

All u need to do is put a wrench on the tention pully and turn it clockwise... this will relive the tention take off the old belt ....put on new one. repeat relive pressure again ...slip it on pully... and relese tention..... done! :)

Posted on Jun 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change serpentine belt on 2006 buick lacrosse


Start by drawing a diagram of the belt routing. Serpentine belts normaly have 1 spring loaded tensioner (1 pully will have a nut or 3/8 or 1/2 inch drive hole) That will be the tensioner. get spanner or ratchet to fit & lever the tensioner away from the belt. Remove belt. fit new belt to most pullys except the easiest to get to, lever the tenioner back & fit the belt to the last pully, Check the belt is on all pullys properly & your done

Jun 28, 2012 | Cars & Trucks

1 Answer

Install a serpentine belt on 1994 ford tempo


under the hood should be a dieagram on proper install follow the pictures you will need a 3/8th or 1/2 in drive ratchet for the idler pully make shore to seat the belt in all the pullys good luck cj

May 14, 2010 | 1994 Ford Tempo

1 Answer

How to remove a water pump on a 1995 bmw 318is


remove the belt and u can see the water pump pully.
take out the pulley and loose out the surrounding screw of the water pump. clean for the gasket and replace the new one

Dec 30, 2009 | 1996 BMW 318

1 Answer

How to repace tenison pully


first releave the tension as you normally would by using a breaker bar and socket and move the serpentine belt aside. Then you remove the center bolt on the pulley itself. Install new pulley and replace the serpentine.

Nov 13, 2009 | 2004 Lincoln Town Car

2 Answers

Serpentine belt replacement how to loosen belt


To loosen and remove the drive belt on a 2004 Toyota 1.4L engine you simply use a wrench and pull up on the spring-loaded tensioner.1d45837.gif
You should be aware, however, that if you are experiencing problems with belt squeal or rattling noise, there is a Technical Service Bulletin (TSB) for your vehicle that provides information for an updated tensioner assembly.

Oct 17, 2009 | 2004 Toyota Corolla

1 Answer

2000 isuzu rodeo removal and installation of serpentine belt


All u need to do is put a wrench on the tention pully and turn it clockwise... this will relive the tention take off the old belt ....put on new one. repeat relive pressure again ...slip it on pully... and relese tention..... done! :)

May 16, 2009 | 2000 Isuzu Rodeo

1 Answer

Need diagram to install serpentine belt


Look at the pullies to see if they are smooth or if they have lines on then. The back side of the belt the ( smooth side) goes against the smooth pullies.The side with lines on it goes to the other pullies. Some vehicles have the diagran in the engine compartment. Under the hood or by the top of the radiater.

May 10, 2009 | 2001 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...