Question about 2005 Chevrolet Colorado

Open Question

How do you remove the bed from a 2005 colorado truck

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
abauto
  • 353 Answers

SOURCE: Torque specs for truck bed mounts

Torque specs are not important in this application, apply some thread locking compound and tighten the bolts.

45-60 ft lbs is about right for the size bolts that are used on that box.

Posted on Sep 22, 2009

Ad
  • 753 Answers

SOURCE: Transmission fluid for 2005 Chevy Colorado

You would need to find something that is the same as sychromesh fluid that GM uses.

Posted on May 03, 2010

ftw1952
  • 10319 Answers

SOURCE: Location Of Starter on truck

right lower side of the engine towards the trans

Posted on Jun 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you reset the passlock on a 2006 2.8 chevy Colorado?


Turn the key on for 10 minutes, off for 30 seconds. Reset. There is a relearnalso. It is three times this. start on the third time.

Feb 22, 2015 | 2006 Tracrac Chevy Colorado - Standard bed...

1 Answer

How do i remove the truck bed from 2005 chevrolet avalanch


disconnect all electrical wiring that is attached to the bed then disconnect the fuel filler tube. there is 4 bolts that hold the bed to the frame that you will have to remove. some trucks the bolts are removed from inside the bed and others from under the bed though the frame. then get help to pickup the bed and turn it to gain access to the pump or remove the bed from the frame.

Sep 19, 2014 | 2005 Chevrolet Avalanche

1 Answer

How do we replace the tailgate handle on a 2005 chevy colorado?


REMOVE TAIL GATE HANDLE YOU USE A TRIM TOOL OR FLAT SCREW DRIVER PRY OFF THE HANDLE ESCUTCHEON DOWN AND AWAY FROM THE TAILGATE IF SCREW DRIVER IS USED COVER THE TIP WITH ELECRICAL TAPE TO PREVENT DAMAGING PAINT SURFACE.FROM THE BED SIDE OF THE TAILGATE REMOVE THE HANDLE MOUNTING BOLTS.ROTATE THE PLASTIC RETAINING CLIPS OFF THE CONTROL RODS AND DETACH THE RODS FROM THE HANDLE. REMOVE THE BOLTS AND WITHDRAW THE LATCH FROM THE END OF THE TAILGATE.PUT EVERY THING BACK VISA VERSA.

Aug 04, 2011 | 2005 Chevrolet Avalanche

1 Answer

Colorado: how to remove tail light lens cover? the two screw's (tailgate area), then... Thanks, GD


There are two metal pins in the taillight housing that push into some plastic clips on the outboard side of the truck bed. Gently place a flat blade screwdriver between the bed and the plastic housing and pry rearward to get the clips to release. You may want to put a rag over the end of the screwdriver to help avoid scratching the paint on the bed. To reinstall, line up the pins with the clips and "thump" the housing assembly wih your hand.

Jan 25, 2011 | 2007 Chevrolet Colorado (Extended Cab) New...

1 Answer

How does the bed on my 2006 chevy colorado attach to the frame? Do bolts just screw into nuts that are welded to the bed?


Yes it is connected with shoulder bolts and nuts up inside the frame. Some have star bolts that can be taken out from inside the bed.

Sep 29, 2009 | 2006 Chevrolet Colorado

1 Answer

2005 Chevy Colorado edit


If you put the tail gate down, there is 2 screw (phillips) that holds the tail light in place. Remove them & you can twist the bulb out. Thats it, put back together in reverse. Hope this helps.

May 21, 2009 | 2005 Chevrolet Colorado

1 Answer

05 chevy colorado


open the tail gate and look for the two screws on the inside of the bed there might be two on the out side if there is not they are held it by clips on the out side remove inside screws and pull straight out

Dec 10, 2008 | 2005 Chevrolet Colorado

1 Answer

2005 Colorado Rotors


Welcome to fixya

Take the wheel off then remove the caliber (brakes ) and then have to remove the nut and pin from the center of the wheel on then it should slide off easy

when takeing off the brakes wen you remove the caliber make sure u us something to hold the calibers piston in like a C clamp or something of that size

hope this helps you out have a good day


Jul 06, 2008 | 2005 Chevrolet Colorado

Not finding what you are looking for?
2005 Chevrolet Colorado Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...