Question about 2008 Pontiac G6

Open Question

Heater core replacement 2005 pontiac g6 instructions

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Pontiac Fiero Heater Core

no its actually really easy i just did it about 3 weeks ago. right under the dash on the passenger side the is a black box unscrew the cover on the side of it and the heater core is right there then you have to  disconnect the hoses under the hood which might be the hardest part after that unbolt the straps holding the heater core on. I keep the straps on till i get the hoses off because then the heater core don't move when you are trying to get the hoses off. Then all you have to do is put it back together.

Posted on Nov 23, 2008

Ad
  • 399 Answers

SOURCE: replacing drivers side air bag on 2006 pontiac g6

irst, You must get the steering wheel with controls. I believe part numbers were listed above, but bottom line, make sure you get the right color if you are ordering. The black one is called ebony. Prices vary depending on where you get them. I got mine from a salvage yard brand new for $75. Second, You must replace the clockspring with the column harness. If you have a light duty pickup, you will need part number 26101829. This is for a 2 stage air bag. If you have a heavy duty, order part number 26101828. This is for a single stage air bag. If you are unsure, take off your airbag and look to see if it has 1 or 2 pigtails connected to it. 1 is a single stage, 2 is a 2 stage. GM has reduced the number of part numbers available to simplify things. Therefore, you will get a harness equipped with an additional 8 pin connector. This is for the steering wheel speed sensor for quadrasteer. If you do not have quadrasteer, just tape it to the column and don't worry about it. 

Be careful when installing the harness, there are about 14 connectors, I spent 2 hours installing the harness and wheel. 

Posted on Dec 06, 2008

johnsmith992
  • 37 Answers

SOURCE: Replace heater core in Pontiac Grand Am GT 3.4l

ram a sharp chissel or pointed head centre punch through the core and prise it out .,than tap the new one in place ,,,there u go bobs ure uncle

Posted on Jan 29, 2009

  • 179 Answers

SOURCE: how do i change the headlight on a 2005 pontiac g6

its probally a haligen bulb needs replaced from the inside under the hood that twists in the back of the light just half a turn the unplug old and put in new

Posted on May 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2005 pontiac G6 heat not working, I've replaced the heater core. Replaced heater core, coolant is good. Now the it only blows cold air, the engine is heating to a steady 200°. Thermostat?


did you replace the actuator that drives the door for the heater core or cable? make sure both water lines going to the heater core are getting hot, if only one is the mix door is not working properly

Nov 30, 2015 | Pontiac Cars & Trucks

1 Answer

Why dose my heater only run on the 4th speed of my 2005 pontiac g6 ?


You will need to replace the "Blower Motor Resistor", which is not difficult for the average person to do. Here's a video demonstrating how to do it:
2005 Pontiac G6 Blower Motor Resistor

Aug 04, 2014 | 2005 Pontiac G6

1 Answer

Where do I start to take out the heater core of a 2008 Pontiac g6? driver side or passenger side?


why r u roving is heater not putting out hot air, may need flushed out, if leaking you need to down load instructions

Apr 06, 2014 | 2008 Pontiac G6

1 Answer

Heater core


May not be heater core, sounds like leaking water into car from some other source.Low coolant could be engine gasket related Check for coolant leaks in engine compartment & under car.
Also check for water leak at winshield before replacing heater core.

Nov 30, 2013 | 2008 Pontiac G6

1 Answer

Installation instructions on heater core for 2008 Pontiac G6


I would go back to the manufacturer and ***** like hell. There is no way you should have to replace the heater core yet!

Dec 30, 2011 | 2008 Pontiac G6

Not finding what you are looking for?
2008 Pontiac G6 Logo

Related Topics:

1,031 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...