Question about Cars & Trucks

1 Answer

My 97 Mazda mpv van reverse light does not come on when in reverse

Reverse light does not come on when in reverse.

Posted by on

  • Kealii Feb 19, 2012

    no reverse light while in reverse

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 2,122 Answers

Hi Kauhanebk, First thing to do is check the bulbs. If they are both okay check the fuse. After doing that if they still don't work look for broken cables and open circuits. If still no results check the reverse light switch. If it needs replacement, be very observant when removing it as there may be a ball bearing inside the housing to give the extra reach needed for operation. Regards John

Posted on Feb 19, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2004 mazda mvp firing order

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall. This is for a 2004 Mazda MPV.

Posted on Dec 03, 2008

  • 69 Answers

SOURCE: I have a Mazda MPV van and its engine light on and

Sounds like an 02 sensor, it reads how much unbured fuel is running through the exhaust and then the computer adjusts the air/fuel mixture accordingly, when the sensor goes out it will lay the fuel to it because the computer isn't getting a read.

Posted on Jul 12, 2009

  • 1 Answer

SOURCE: how many catalytic converters on a Mazda Mpv 2003

I disagree. I believe there is 2 cats on the 03 MPV. If you look under the car. The 2 pipes from the headers meet right before the muffler. There is 1 cat under the vehicle and another right off the header (looks like an old glass pack muffler).

Posted on Sep 04, 2009

  • 111 Answers

SOURCE: How do you change the alternator on a 2001 mazda

you must remove axle and plastic cover behind wheel exhaust section 4 bolt crossmember disconnect battery first 3 bolts on block for axle brace 2 bolts hold brace to axle tensioner pulley is reached from below support on jack stand far enough back so it doesnt get in the way good luck may the force be with you

Posted on Sep 13, 2009

johnjohn2
  • 5763 Answers

SOURCE: where is iat sensor located on 2000 mazda mpv van

the iat sensor is part of the mass air flow sensor, its build inside maf sensor.you will have to replace mass air flow sensor to replace intake air temp sensor, make sure connection at maf sensor is good if so replace maf sensor, good luck.

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Mazda MPV Standard Transmission Reverse Light Switch was replaced and my back up light still don't work. they came on for about 15 mins then stopped working? What to do next?


that reverse light switch just threads in no adjustments

a simple contact switch

does reverse gear select firmly no slop

are the cable connections to the gearbox to the shift stick sloppy or lazy
no broken engine mounts
if nothing obvious

i would have a look at the back bulbs, holder and earths


26329167-li4g2rdronquokdv0yx25uce-5-0.jpg

26329167-li4g2rdronquokdv0yx25uce-5-1.jpg

Oct 27, 2016 | 2002 Mazda MPV

1 Answer

How to replace little light inside headlight assembly on 03 mazda mpv?


I had one of these vans. They are fantastic for space, but commonly have electrical issues. The head lights are a single unit, and if you want to replace a bulb, the Whole unit has to be removed. There are several screws located on the top and bottom of the unit, that must come out. Then it slides out easily. Replace your bulb/s then reverse.

Aug 29, 2014 | 2003 Mazda MPV

1 Answer

My 91 mazda mpv 4x4 van won't start. we were


than I would have the fuel pressure check and change the fuel filter

Mar 09, 2010 | 1991 Mazda MPV

2 Answers

Need to replace the #1 coil on a mpv mazda van. Which coil is 1


looking under hood to the back left cylinder.that number 1 follow it to coil number 1.

Dec 28, 2009 | 2003 Mazda MPV

1 Answer

Where is the starter on a 1995 Mazda MPV van?


it is located under the skid plate. you'll need to remove the front drive, the alternator, and power steering pump out to remove the starter. need to remove the bottom cover to see it.

Nov 18, 2008 | 1995 Mazda MPV

1 Answer

2004 Mazda MPV


I called mazda already thank you

Jun 30, 2008 | 2004 Mazda MPV

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...