Question about 1997 Chrysler Sebring

Open Question

Set the clock

I CAN NOT SET THE CLOCK IN CAR NO BOOK

Posted by on

  • aliveguy13 Nov 04, 2008

    05 Sebring, bought used, no book, I can set radio but not clock

  • bob1014 Dec 12, 2008

    how to set clock in 2005 sebring

×

3 Suggested Answers

  • 1 Answer

SOURCE: 2004 pacifica set clock

Beside the analog clock there is a small dot where you can insert a pen. When you push this in gently the clock starts moving very fast. Hold this button in until the time is correct. Make sure you stop before you go by the time you want because it only goes in one direction.

Posted on Nov 09, 2008

emissionwiz
  • 61118 Answers

SOURCE: Set clock

Beside the analog clock display there is a small dot where you can insert a pen. When you push this in gently the clock starts moving very fast. Hold this button in until the time is correct. Make sure you stop before you go by the time you want because it only goes in one direction

Posted on Dec 18, 2008

airjer995
  • 5332 Answers

SOURCE: how do I set clock

Clock Setting Procedure (digital clock page 242 of your owners manual)
1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune/
Audio control.
3. After the hours are adjusted, press the right side
Tune/Audio control to set the minutes. The minutes will
begin to blink.
4. Adjust the minutes using the right side Tune/Audio
control.
5. To exit, press any button/knob or wait 5 seconds.

SETTING THE ANALOG CLOCK (page 238 of your owners manual)
To set the analog clock at the top center of the instrument
panel, press and hold the button until the setting is
correct. The clock will adjust slowly at first and then
quicker the longer the button is held.

Posted on Jan 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 grand marques set clock


Go to Fordfleet.com and download the owners manual.

Aug 26, 2016 | 2005 Mercury Grand Marquis

1 Answer

How do i set my clock on my dashboard?


Instructions Setting the Clock
    • 1 Turn the car on then hold the "Clock" button until the ":" begins blinking -- usually four to six seconds though some take up to a minute.
    • 2 Use the "1" and "10" buttons to set the minutes, "100" and "1000" buttons to set the hour
    • 3 Press the "Set/Reset" button to set the new time.

Jun 25, 2014 | 1995 BMW 525i Sport

2 Answers

Set clock for mercedes clk 320


go to setting and choose clock setting, pushing the button up and down until the correct time, then the clock will turn automatically to match the digital clock you set in the setting.

Apr 18, 2013 | 2005 Mercedes-Benz CLK 320

1 Answer

Resetting clock on truck stereo


The Kenwood KDC-MP335 is an aftermarket car radio that's available for many cars and trucks. The radio unit comes with a built-in digital clock. If your clock is showing the wrong time, all you need to do is enter the radio's clock-setting mode to correct the time and set the clock.------------------------------------------------------------------------
vas 5054a v19

Nov 28, 2012 | Cars & Trucks

1 Answer

Need to know how to set clock in 06 chevy malibu


the car has at least 3 "entertainment" packages, which go with the interior level of the car. look in your manual and figure out which package radio and clock your car came with, then repost your question telling us which package your car has and then we will know which set of instructions you need to set your clock. But wait, while you are figuring out which system you have, the instructions to set the clock will be right there and you can do it yourself. Eureka moment.

replacement manuals can be had on ebay for a couple bucks

Nov 22, 2010 | Chevrolet Malibu Cars & Trucks

1 Answer

How do we reset the manual clock in a gl 450 , 2007


first set the digital clock in command if you have the command in your car it will take automatically by the analog clock, if don't have the command set digital clock on instrument cluster display and press rest button without go out from clock setting then you can see it's setting automatically,

Nov 11, 2010 | 2007 Mercedes-Benz GL450

1 Answer

How do I set the clock on a 1998 chevrolet cavalier? The book says to press 'set' but I don't have such a thing on my panel.


Hello. try this and see if this works

Use the following procedure in order to set the clock display:
  1. Press and hold the HR button until the correct hour appears.
  2. Press and hold the MIN button until the correct minute appears.
  3. There will be a 2 second delay before the clock goes into the time-set mode.

Oct 03, 2009 | 1998 Chevrolet Cavalier

1 Answer

Set clock


push and hold power button and then use up down to set clock

Sep 26, 2009 | 2001 Saturn S-Series

1 Answer

Setting the clock on an Audi A4 '98 1.8s


If it's an analog clock, pull out on the stalk closest to it (the small one protruding from the cluster), and then turn it to the right - that will advance the clock.

Sep 20, 2009 | 1998 Audi A4

Not finding what you are looking for?
1997 Chrysler Sebring Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...