Question about 2007 Lexus IS 250

Open Question

The drivers side inside door handle is loose how do i take the door panel off

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: replacing the driver side inside door handle

Find and remove two screws visible on the door panel, including underneath small covers. Pop them off with a small screwdriver. Lift front edge of control panel, then pull forward and lift out. Pull upper door panel from door. Disconnect courtesy light connector. Disconnect door open handle cable assembly and door lock cable assembly. You might need to lift panel and twist to get it off.

Posted on Jun 29, 2009

  • 1986 Answers

SOURCE: 2000 lx 470 driver door panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side door rod to handle has come loose from the locking mechanism


There is a replacement clip available in most auto repair stores. HELP brand. Must remove the door panel (inside) and re-attach.

Feb 16, 2014 | 1995 Mercury Villager

1 Answer

The plastic inside door handle on the drivers side has come loose and I can't open the door from the inside how do I remove and or replace the inside handle?


There are two screws holding the plastic trim panel. Take off the panel and you will see where the handle is attached to a linkage. Remove the retaining clip and replace the handle.

Mar 12, 2011 | 2000 GMC New Sierra 1500

1 Answer

How too remove door panel and window crank handle on driver side on 2001 chevy van


On that model of van, you will have to remove the screws on the lower side of the panel, and in the door handle. The window crank handle has a spring clip in it that takes a special tool that is available at any parts store, but very easy to use (you just slide it up and down inside of the handle a few times, and it should pop off). After you have the screws, and handle off, you will need to "pop" the panel loose from the door. whille pulling on the sides of the panel, look inside of the panel to see if you can locate the pop in fasteners. When located, you'll have to have a screw driver, or similar object to pry the panel off of the door. (some of the fasteners might break, but are available at the part store) After the panel is loose, be careful of the door release handle, and with the window in the down position, take all of the switches loose from the panel and carefully raise the panel up and out.I hope that this is helpfull.

Jan 03, 2011 | 1999 Chevrolet Express

1 Answer

My out side door handle on the driver side came loose 2007 danali


It most likly broke inside. You will have to remove interior door panel to access all the bolts and rods to replace it.

Feb 10, 2010 | 2007 GMC Yukon XL Denali

1 Answer

Driver side door handle (outside) and gas pedal 2000 Camry


Bring the vehicle into the dealer if you have a sticky gas pedal. This is a TOYOTA PROBLEM.
Door handle:
It easy ! You need a philips2_bing.gif and flat screw driver,and a needle nose pliar.
Use flat screw driver and pry out the two or three dust covers for the arm rest screws then use philips and remove the screws. Next use the flat screw driver and pry out the black plastic mirror cover from the inside of the door. Pry out the switch with the flat screw driver and disconnect it. On the side of the door panel just above the striker/loch mechanism is this plastic push pull type of a hold in screw. Use flat screw driver to get it to move a little then pull it out with the needle nose. Depending on which door your doing if you have a map folder in the door there are two more screw to remove on the bottom of the door.
Now the inside door handle is tricky it comes out in TWO pieces. Use philips and get the only hold down screw you see out.( you may have to pry out a little screw cover first) Now the inside door handle cover is removed by placeing the flat screw driver on the rear of the outside of the cover top and on the outside rear bottom to release the tangs that are holding it onto the panel.Pry it out lightly you may have to place the screw driver over the top of the door release button and pry that way. Don't loose your cool its a pain but it will fall out. Once its removed unhook the panel.

Next lift the plastic cover and remove the door handle hooks and levers . Basically use common sense this is easy stuff. There may be two screws from inside of door panel that keep handle in place . Then work handle loose from outside and inside . reverse for installation.

Jan 27, 2010 | 2000 Toyota Camry

2 Answers

The driver's side outside door handle is loose, toyota celica '95


I assume that the entire handle unit is loose in the body work of the door.
The interior door trim will need to be removed to access the inside of the door to fix the loose handle.

Do not attempt his yourself unless you have some experience in this area.
Take the vehicle to the nearest reputable auto body repair shop and they can easily fix it for you. There could be a breakage on the retaining system on the handle or the retainers may just need tightening.

Typically door handles which have not been subject to damage or abuse will not usually loosen like this. It's possible the door was damaged and the panel repaired and repainted at some stage. If so the door handle may have been removed and refitted in a sloppy manner.

Dec 03, 2009 | 1997 Toyota Camry

1 Answer

1997 Buik Century-the handle on the driver side door is loose. I assume I need to remove the inside panel to tighten bolts for handle.


Yes there should be a clip and or 2 small screws. sometimes it rusts, but you dont see that very much.

good luck,
Michael

Apr 29, 2009 | Buick Century Cars & Trucks

1 Answer

Driver side door mechanism


Can you open the door with the inside handle? If you can, the problem is probably a broken plastic fitting inside between the outside handle and the door latch. There are door panel removal tools available at your local parts store that look like short handled wide bladed pry bars. You could get by with a good stiff putty knife if needed. Take off the arm rest, window crank, and speaker grill if you have aftermarket speakers. Slide the door panel removal tool under the edge of the door panel and CAREFULLY pop the clips loose from the door frame. You could always leave the window open and do the "Dukes of Hazard" thing, but then you would have to change the paint scheme.

Apr 15, 2009 | 2000 Suzuki Esteem

1 Answer

Driver Side Mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Oct 13, 2008 | 1993 Toyota 4Runner

1 Answer

2000 lx 470 driver door panel


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Oct 11, 2008 | 2000 Lexus LX470

Not finding what you are looking for?
2007 Lexus IS 250 Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...