Question about 2006 Dodge Ram 1500

1 Answer

My hazard lights and turn signals stopped flashing

My turn signals and hazard lights stopped flashing on my 06 dodge ram reg cab truck I checked all the fuses under the hood and the all were fine is their another fuse box somwhere that has a fuse just for the hazard lights.

Posted by on

  • 4 more comments 
  • Anonymous Mar 06, 2009

    2006 DODGE TRAILER LIGHTS NOT WORKING

  • Anonymous May 09, 2009

    Same thing just happened to me tonight

  • Anonymous Mar 14, 2014

    When I turn my car on the hazard button makes a sizzling noise if I turn on my hazard lights it stops and the hazard lights work fine

  • Anonymous Mar 20, 2014

    Mechanics say there is a short that they can't find. I have no turn signals or hazard lights.

  • Anonymous Mar 20, 2014

    it's definitely the wiring but mechanics can't find it. Any idea where to start. Have no turn signals or hazard lights. Replaced the black box fuse under dash as well as turn signal switch.

  • Anonymous Apr 01, 2014

    my turn signals and hazard signals and brake lights stopped working in the rear of my 2008 dodge caliber

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 85 Answers

I bet you have a bad multi function switch or turn sig switch. good luck

Posted on Nov 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signals were working...but blinking fast. now they don't work at all...replaced fuse in side panel near door and still nothing. Everything else works..headlights, wipers, hazards..what gives?


you have a separate flasher for the turn signals.this is what your problem sounds like.if all your lights are working including the signal indicator on the dash then it will be the signal flasher.if you turn on the hazard flashers and locate it under the dash, this will show you what the turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal flashers again

Mar 08, 2011 | 1996 Dodge Ram 1500 Club Cab

1 Answer

I have a 2002 dodge ram 1500. I have rear break lights, reverse lights, and turn signals, but when I turn my headlights on there are no running lights - any ideas?


Check the hazard light switch. See if the switch works to flash the parking lights. Also there is a wealth of information here . Can't go wrong having it for instances like these.

Feb 15, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

On a 2002 dodge ram 1500 truck the brake lights and the turn signals and winshield wipers dont work the only brake light that works is above the cab. and the turn signal flashes on the dash like they are...


I suspect a bad multi function switch located in the left hand side of the steering column. This switch controls your high/low beams/wiper delay/windshield washer/turn signals and hazards.

Dec 31, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1998 Dodge 2500 pickup turn signals, hazards


There is a conector box on the left side of your steering wheel on the colum loosen it and check your wires I bet when you just loosen the block they will start working,I hope this helps you

Oct 08, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Turn signals quit working. Can't find a fuse labeled for turn sig


Check the flasher unit on both turn and hazard lights,

make sure hazards are off
if hazard flasher bad and and on it will interfere with turn signal

Sep 05, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1996 Dodge 3500 I Have No Turn Signals Or Hazard Lights If I Press The Brakes & Try The Signal It Comes On the Opposite Side But Want Blink


Check the 20 amp fuse if it's blown. This fuse is located in the power distribution box on the left hand side by the firewall. If the fuse is okay more than likely your multifunction switch needs to be replaced.

Jul 12, 2009 | 1996 Dodge Ram 3500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

971 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...