Question about Cars & Trucks

Open Question

How do i fix/check code p0507 in a 2002 kia sedona

Rpm is higher than expected

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mcalkins3
  • 123 Answers

SOURCE: kia sedona 2002 error code P0118

P0118- (ETC) Engine Coolant Tempature sending unit, high input. Your ETC is either faulty or has a poor wiring problem. Thank you for using fixya.com

Posted on Oct 22, 2008

emissionwiz
  • 75066 Answers

SOURCE: DTC code '' Idle air control system RPM higher than expected''

Check for vacuum leaks, to do this buy a can of carburetor spray and spray around the top of the engine, if there is a leak the engine will sound different, if not the idle speed control valve may be defective.

Posted on Nov 23, 2008

  • 77 Answers

SOURCE: Saturn SL 2002 High Idle

Intake manifold gasket. Leaking where intake meets head.

Posted on May 07, 2009

  • 2926 Answers

SOURCE: how many ignition coils hava a kia sedona??????

6 ignition coils, one for each cylinder. 3.5 SFI DOHC.

Posted on Apr 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia sedona 2.9crdi wont rev above 2500 rpm in any gear, does any one know why?


The computer is in the limp in mode. Do a diagnostic inspection to see what trouble codes appear.

Feb 11, 2015 | 2003 Kia Sedona

1 Answer

Grinding noise at high rpm


Have you had fuel pressure tested, as well as exhaust for possible plugged catalytic converter?

May 20, 2014 | 2004 Kia Sedona

1 Answer

What is the code p0507


by what the forums say this seems to be a common problem. Before you go replacing stuff, I'd check vac hoses real close, and connections to the throttle body(and see if the throttle place is nice and tight) and IAC, maybe get some contact spray and spray the connections to make sure they are working. The checklist is:
Explanation:
The ECM has detected that the IAC counts are higher or lower then expected, the engine speed is not in its expected range

Probable Causes
1 - Vaccum leak on engine
2 - Dirty throttle body
3 - IAC motor defective
4 - Poor electrical connection to te TAC value

May 14, 2014 | 2003 Kia Sedona

2 Answers

Code p0507


possible causes are:

Dirty throttle body
Electric throttle control actuator incorrectly adjusted/faulty/damaged
Air leak on Intake
Poor electrical connection to the Intake Air Control valve

P0507 KIA Idle Air Control IAC System RPM Higher Than Expected

May 14, 2014 | 2003 Kia Sedona

1 Answer

2003 Kia Sedona rpm running high on a cold start.


If it is around 1200rpm for a few minutes this will be normal as the ECM has set the RPM to compensate for the cold air intake (much like an automatic choke). After a few minutes it should drop back to around 1000rpm and then when the motor has been running a bit drop back to around 850-900rpm. If it not following the pattern then run the fault codes and fix the sensor that is reading incorrectly.

Nov 01, 2013 | 2005 Kia Sedona

1 Answer

2005 Kia Sedona Fault Codes


you can try to read the fault codes with ELM327 V1.5 scanner, and know where is the problem, and then you can fix the problem. It is cheap and easy to operate.

Jun 26, 2012 | 2005 Kia Sedona

1 Answer

Cost of Cambelt change on Kia Sedona


you wont get much change out of £600,and that is with a kia main dealer(not much cheaper at quickfit)but they will be looking for anything that needs doing(thats how they make there money)..

Apr 13, 2010 | 2003 Kia Sedona

1 Answer

Kia sedona 2003,shut off when i put defrost.the idel is araun 400 rpm.do i have to increas the rpm to 850 rpm?


I HAVE A 03 SEDONA, AND IT IDLES AT AROUND 850 RPM, BUT THE DEFROST SHOULD NOT SHUT IT DOWN, MIGHT HAVE A SHORT GROUNDING OUT

Jan 07, 2010 | 2003 Kia Sedona

1 Answer

Kia Sedona 2003 shaking motor


Have a cylinder leakdown test done...likely they missed another bent valve. I'm betting it's an exahust, because it would be less drivable if it was an intake, but regardless, I'll bet that is your problem.

Sep 22, 2009 | 2003 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...