Question about 1995 Nissan Altima
I changed the bulbs on my '95 altima, but the clips that are supposed to secure the bulbs in place will not snap back into place. As a result, the headlights are seated in the socket correctly as best I can tell, but the clips are only being held in place by the rubber gasket and large plastic housing ring. Is there some sort of trick to getting those locking pins to snap correctly? I sure as hell couldn't get them to snap.
Is this what you have? Does the locking ring screw on or does it snap? Do you see a tab or anything that might have broken off? Can you compare locking rings from one side to the other? Or maybe try a locking ring from the other side for testing? My biggest problem is I can't see anything from here.
Posted on Jun 27, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: head light 2005 altima
you have to remove the bulbs from inside of the hood in the engine compartment. in some cars you have to remove some "pins' and remove the entire headlight assembly.. You then remove the holder where the lightbulb is located and replace the bulb.
Posted on Nov 18, 2008
obviously you have problem with wiring. if driverside works check withh a test light for power and ground. connect ur light to battery and test.if yuo have problem use the wiring from driverside to repair.
Posted on Jan 31, 2009
SOURCE: 02 Xterra headlight replacement
This was not real easy, sorry. This is one of those jobs that smaller hands are best equipped to do. The Driver's side light is pretty easy and striaght forward because you can manuveur it. The passengerside lite allows about 1/3 the room to work.
I sprayed some silicone on the ring, as there was some road grime in there. I found it hard to get the bulb in without sctratching it too. I did get it in and threaded, and I did get a pseudo "click" or lock out of it, so it can be done with a little frustration.
To me the most amazing part was whe I turned on the lights-- they were aimed correctly! Good luck with this. You may just have the ring crossed threaded a tad bit-- and given the angle you are looking at -- you would never know
Posted on Mar 02, 2009
Tips for a great answer:
Nov 15, 2010 | 2004 Nissan Altima
Aug 30, 2010 | 2002 Nissan Altima
Apr 07, 2010 | 2007 Nissan Altima 3.5 Sedan
Feb 13, 2010 | 2001 Nissan Altima
Jan 26, 2010 | 2003 Nissan Altima
Jan 26, 2010 | 1995 Toyota 4Runner
Oct 14, 2009 | 2001 Nissan Altima
Jan 04, 2009 | 2003 Nissan Altima
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: