Question about Cars & Trucks
I suggest to look fault codes stored in the computer; sound like a problem with the torque converter or valve solenoids clogged in the transs. Your fluid leves is OK?
Hope this helps.
Posted on Feb 16, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You may try to clean the screen and put new clean ATF in, but it sounds like a rebuild is in your near future. WIsh I had better news.
Posted on Nov 07, 2009
do you have a hole in the piston or gasket? If in the piston it is most likely from coolant or water. If water, could be a cracked head, or being sucked in through the intake and building up in the 6th cyl. I have a lexus that had a hole in the side of the motor and noon could figure out why. I pulled the head and found water... Put new block in and egr codes came up. Pulled EGR and found it was sucking in water, due to an exhaust leak that was allowing condensation to build and would not blow out once in the egr tube. If you face the same problem (hole in block) I am going to say too much compression. Could be from head gasket not being torqued properly and leaking cooland, cracked head, or wrong spark plugs-and worst case scenario which I have yet to witness, bad spark plug gap. Not likely on your car, i would think.
Posted on Mar 29, 2010
Tips for a great answer:
Jan 16, 2018 | Nissan Cars & Trucks
May 18, 2016 | Nissan Cars & Trucks
Oct 19, 2014 | 2006 Nissan Navara 2.5
Feb 16, 2012 | Nissan Cars & Trucks
Feb 16, 2012 | Nissan Pickup Cars & Trucks
Nov 07, 2009 | 1999 Nissan Pathfinder
May 09, 2009 | 1997 Nissan Pickup
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: