Question about 1999 Dodge Intrepid

1 Answer

I have a 99 intreped ES ,the trackion control,comes off an on,when it clicks on the car seems to not want to move ,then the RPM goes high until ley up off the gas.then it clicks off,at that point you can hit gas

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 17,970 Answers

Hi Ryan:
When the Engine Control Module encounters problems, it will also disable the traction control system. Scanned the ECM to know fault codes stored there, repairing this codes and clearing the codes will turn off the Traction indicator and allows the traction control to work once again.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 16, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't My 2000 Lexus es300 go into reverse or neutral?


Probably the stick that control your transmission has moved. It's not sync. I recommend that you take it to a specialist.

Sep 07, 2014 | 2000 Lexus ES 300

1 Answer

High rpm on its own when on idle and gear?


Check with your local Toyota dealer, this model may have had a recall notice out for this problem, if so they should fix it for free.

Aug 01, 2014 | 2001 Toyota Corolla

3 Answers

High idle unless driving in gear, but if clutch is pushed in or car is in neutral rpm goes up to 2900


run fault codes to check for accelerator position sensor problems . Check for vacuum leaks. If cable accelerator then check that the return spring on the end of the cable is attached and not missing.

Feb 14, 2014 | 2004 Subaru Outback

1 Answer

89 cutlass cierra crank but wont start when wet out unless gas pedal is pushed


This should be a drive by wire vehicle meaning it has a cable for the throttle body. First thing would be to see if any error codes can be pulled up (most parts stores will do that for free.) Drive by wire versus the late model that use electronic control for the idle have a IAC or idle air control which when first started controls the idle air intake--all air is run by it to idle the vehicle when cold--

Usual symptoms are rather high idle when cold engine or even idle and RPM jumping up and down and stalling when cold.

Another way if idle does drop when cold is tapping the gas--engine will still run until hot. Means not usually a fuel pump issue.

You could also have if the vehicle is fuel injected a dirty Mass air flow sensor, a throttle position sensor, etc.

These can be if the vehicle has them cleaned using a special zero residue spray cleaner.

First have it scanned to see what if any errors it shows--the computer.

Dec 17, 2012 | 1989 Oldsmobile Cutlass Ciera

1 Answer

Seems as if the cable is sticking causing the transmition not to shift until high rpm


What model Jeep? This is normally caused by the filter not flowing fluid correctly. A fluid and FILTER change will solve the problem 99% of the time. Do not do the "Trans Flush" at the quick lube. They do not change the filter.

Mar 17, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

I have problem on lexus es 300 99 year, when i driving at 70 miles my rpm is going to 4000. My overdrive it does not work. I have check engine light and its code is knock sensor bank 2.


My Lexus es 300 most often when engine is warm will not shift in to last gear. Stop engine start it will shift ok when engine is cool. engine pings kock senores. When in gear at high speed the car runs like new?? Car run bad in hot weather. VSC light on. Red light looks a circle with red line through it comes on not always..

Sep 03, 2010 | 1999 Lexus ES 300

1 Answer

2000 dodge intreped es - trhe trunk does not open with the remote or the trunk botton in side the car. However it opens with the key. Could it be a fuse? or what.


I have a pick of the fuse box, the one I made red is the fuse your looking for, if that does not do it then it could be the switch or the body control module.

http://www.theshootist.com/carspics/trunk.gif

Mar 07, 2010 | 2000 Dodge Intrepid

1 Answer

Possibly electrical.


Have they checked your ignition switch? Those things are tricky...

Sep 05, 2009 | 2008 Chevrolet Hhr

2 Answers

99 chevy silverado Unstable idle when it worms up


Check the engine mountain rubbers ,, one or more of them is broken and needs to be replaced.

pop the hood, start the vehicle and move it from park to drive to reverse with the brake pedal down and you will see the engine moving. the broken mounting rubbers are the cause for this.

Feb 07, 2009 | 1999 Chevrolet Silverado 2500

Not finding what you are looking for?
1999 Dodge Intrepid Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...