Question about Mazda MAZDA6

1 Answer

Advanced Key (Keyless Entry) Opens Door. Car Start Button will not work. Red Key Light Flashing and Security System Light Flashing. Took possession of brand new car only 10 days ago. Car Hand book extremely poor - too full of discalaimers and not how things work, book should concentrate on model not whole range.

Posted by on

  • Anonymous Mar 31, 2014

    security light flashing car will not start

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

There is a problem with ur system reading the remote either u need to reprogram it or the system needs to be fixed dealer can only fix this

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you turn off an alarm for a 2005 Saturn Ion


Disarming an Armed System/Silencing an Alarm
If system arming has been requested by the keyless entry transmitter, it must be disarmed.
Important: Using the power door unlock switch or manually unlocking the doors does not disable the CTD armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the BCM stores the CTD mode status in memory.
?€¢
To disarm the CTD system in arm pending mode, SECURITY indicator flashing and doors open, perform 1 of the following:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system in the armed mode:


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.


?€¢
To disarm the CTD system when activated, alarming mode.


-
Press the UNLOCK button on the keyless entry transmitter.


-
Insert a valid key into the ignition and start the vehicle.

Jun 24, 2016 | 2005 Saturn ION

1 Answer

My issues with my toyota yaris it's a 12 plate Toyota I went out to it Sunday keyless entry wouldn't work, and the bush button start wouldn't work I thought flat battery so got the spare same issue, I did...


That flashing light means that the antitheft device is active. If it was not the problem in the first place, when you took out the battery, it became another problem.

Nov 04, 2013 | Cars & Trucks

1 Answer

Can't start 58 reg Keyless entry/start C-Max


Check your Owners Kit for a Owners ID Card is about all I can add. The Security system is suppose to read your chip in the FOB. All I can think of is to have the Keyless Entry Card in hand(inside Kit) while you touch the Start button.
Disconnecting the car battery will reset the Security or do any good, because your car wants a Signal from something. I am guessing Ford would have to give you something to substitute for a dead FOB.
If not, shame on Ford. They finally created a problem by getting too fancy and forgetting basic accessibility. You might try leaving the Key turned in the outside door and then pressing the Start button or entering the Keyless Code. Just don't forget to pull the keys out of the door if the engine starts.

Jul 22, 2013 | 2007 Ford C-MAX 1.6

1 Answer

Vats system


Instructions
    • 1
      Insert your key into the ignition. Turn the key forward until it can go no further, without starting the vehicle.

    • 2
      Press and hold the "Valet/Override" button located under the dash. Hold the button until the blinking LED light on your dash is solid. Switch your "Valet" button to "Off" if you have a button labeled "On/Off." Your alarm should now be reset. If you wish to enable the alarm, repeat these steps to turn the alarm back on.

    • 3
      Remove wires from your battery if you wish to temporarily turn off your alarm. Disconnect the wire connected to the main power source to permanently disarm your alarm. Trace all wires connected to your battery and disconnect them. If you have no familiarity with your vehicle's wiring, you should take your vehicle to a neighborhood installer to disconnect the wires for you.


God bless you

May 31, 2013 | Pontiac Firebird Cars & Trucks

2 Answers

Anti theft system came on dash. shut the car down will not start. 2002 cadillac. i was told 30 differ sensor showed wrong. which sensor to start with.


The SECURITY light is located on the instrument panel cluster.

If the ignition is off and any door is open, the SECURITY light will flash, reminding you to arm the system. To arm the system, do the following:
1. Open the door.
2. Lock the door using the power door lock switch with the door open or the remote keyless entry transmitter. The SECURITY light should come on and stay on.
3. Close all the doors. The SECURITY light should go off within approximately 30 seconds. If a door or a trunk is opened without a key or a remote keyless entry transmitter, the horn will sound and the lamps will flash for about 30 seconds.

Also can check this and other details in the 2002 Cadillac Owners Manual (page 85 and next).

Hope helps (remember rated and comment this).

Jun 15, 2010 | 2000 Cadillac DeVille

1 Answer

Had car starter installed now the passlock light stays on. He took the key out while the vehicle was running. They disconnected the battery and hooked back up but that did not work.


Important: Using the power door unlock switch or manually unlocking the doors does not disable the Content Theft Deterrent (CTD) armed mode. Also, disconnecting the battery or pulling fuses does not disable the armed mode, since the body control module (BCM) stores the CTD mode status in memory.
• To disarm the CTD System in arm pending mode, SECURITY indicator flashing and doors open, perform one of the following: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle. • To disarm the CTD System in the armed mode: - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle. • To disarm the CTD System when activated, alarming mode. - Press the UNLOCK button on the keyless entry transmitter. - Insert a valid key into the ignition and start the vehicle.

Nov 04, 2009 | 2005 Chevrolet Equinox

3 Answers

LHJ001 WIRING


I have the 1995-97 Lincoln Continental Alarm, Remote Starter, Keyless Entry Wiring, review it:

b94b6e9.png


Hope helped.

Oct 30, 2009 | 1996 Lincoln Continental

2 Answers

Security light flash no security system on truck


sometimes turning the ignition on 3 times quickly without starting will reset the computer. If the van has power locks and keyless entry then try using only the keyless entry. Sometimes your car wont have a alarm but an anti theft device which will not allow it to start if it goes off or something triggers it.

Jul 26, 2009 | 2003 Dodge Ram Maxi

1 Answer

Red security light is out and remote acess does not work. 1999 Je


try this turn key on an off ten times fast once you hear the door lock click press your keyless entry up to 4 times then turn switch off on car and see if it works( i hope this will help you 0

Jan 18, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...