Question about Cars & Trucks
Are the tires properly balanced? Are the wheel bent? Do you have excessive wear in the suspension parts?
Posted on Feb 16, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1995 dodge ram 1500 V8
hi, you should find a serp. belt routing diagram on the cross member that supports your radiator. if not- disconnect neg batt terminal for safety. you'll need a long breaker bar metric. as most, if not all fasteners on your ram are in metric. cant remember right size socket, but just go through your metric set and "eyeball"it. once you have the proper socket-detention the belt by pulling breaker bar clockwise. remove old belt. it maybe useful to take a picture of how your old belt is routed with a camera equipped cell phone (if it is still on) so that if you get into trouble, you can look at the picture as a reference point. new serpentine belt install--insert new belt over the cooling fan route under crank pulley-over fan pulley, around p/s pump pulley,up and around a/c comp pulley, under idler pulley, over alternator pulley and finally around tensioner pulley. pull breaker bar clockwise to slip belt past and onto the tensioner pulley. release tension on tensioner. be sure to check tensioner indexing marks located on the tensioner arm this is to make sure the new belt is installed properly. reconnect neg batt cable to terminal-remove any hand tools from engine bay, start engine and observe belt operation. hope this helps!
Posted on Feb 13, 2009
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
Posted on Mar 12, 2009
On that I believe it's a coil pack & should have the numbers of the cylinders on it. If it has a distributor,then simply go to www.autozone.com & find all the info you need. No,I don't work there,lol. Just a good place for solid info.
Posted on Jun 21, 2009
Tips for a great answer:
Jun 24, 2016 | 2007 Dodge Ram 1500 Quad Cab Sport
Sep 16, 2015 | 1995 Dodge Ram
Jan 02, 2011 | Dodge Ram 1500 Cars & Trucks
May 30, 2010 | 2004 Dodge Ram 1500
Mar 15, 2010 | 1998 Dodge Ram 1500 4WD
Dec 02, 2009 | 1997 Dodge Ram 1500 Club Cab
Jun 01, 2009 | 1999 Dodge Ram
40 people viewed this question
Usually answered in minutes!