Question about 1999 Mazda Protege
Have a scaner pull out code p1170. My book does not have listing for madza.The will lack power on take-off.Also code po300 &po302.
Front heated O2 sensor no inversion. It means that the signal isn't increasing like it should. Most likely the O2 sensor is bad. It could also be a short or that the wires aren't plugged in all the way. Another possibility is that the PCM isn't getting vacuum signal.
Posted on Dec 03, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 17, 2015 | Acura Cars & Trucks
Apr 04, 2013 | GMC Cars & Trucks
PO171 OBD2 Code basically this means that an oxygen sensor in bank 1 has detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. The P0171 is one of the more common trouble codes.
his code is triggered by the first downstream (front) O2 sensor. The sensor provides a reading of the air:fuel ratio leaving the engine's cylinders, and the vehicles powertrain/engine control module (PCM/ECM) uses that reading and adjusts to keep the engine running at that optimum ratio of 14.7:1. If something is not right and the PCM cannot maintain the 14.7:1 ratio, but rather there is too much air, it triggers this code.
Nov 06, 2012 | 1997 Toyota Camry
Apr 09, 2011 | 1997 Mazda Millenia
Dec 05, 2010 | Land Rover Range Rover Cars & Trucks
Jan 05, 2010 | Mazda 323 Cars & Trucks
Oct 20, 2008 | 1996 Mazda MX-5 Miata
1,263 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: