Question about 1998 Dodge Neon

Open Question

How to replace valve stem seals on 98 plymouth Neon 2.0 SOHC

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
daves944
  • 1050 Answers

SOURCE: I've replaced the cam oil seal on my 1998 Neon

When you put the seal in, you must pack grease inside the hollow around the inside of the seal. There is a small girdle spring in there that keeps tension on the seal lip. When you tap it in, this spring likes to pop out, the grease prevents this. Also, a good tool is required to prevent deforming the seal during the install.

Posted on Apr 13, 2009

Ad
  • 14036 Answers

SOURCE: 98 neon wheelbearing dry replace just the

YOU HAVE TO REPLACE THE WHOLE BEARING UNIT.IT IS NON SERVICEABLE.

Posted on Sep 27, 2009

  • 36 Answers

SOURCE: belt and hyd tensioner removed on 98 neon... how

you will need a haynes or chilton manual (try library before the book store) the various pullys have to be in alignment with pointers stamped or cast in metal and vary between engines

Posted on Oct 09, 2009

Gozer
  • 435 Answers

SOURCE: Need to locate the oil sending unit for and 98

It's on the back side of the engine below the air filter and exhaust manifold.
You can gain access to it from under the vechicle.

Posted on Jul 11, 2010

honeymokey
  • 3113 Answers

SOURCE: hello i have a 97

No fuel pressure? Pump not running? Power to the pump ? Bad fuel pump!

Posted on Sep 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 plymouth neon runs fine cold but as soon as it gets warmed up about 20 to 30 miles it starts to bog down and sputters i changed both o2 sensors and the catalatic converter what else can it be


Randy:This is a shot in the dark as I don't know if you had a reader hooked up or not(most parts stores do it free)but it could be a cam sensor or crankshaft sensor.I have a 98 neon sohc that was doing the same thing,only after about 10 minutes or so.Good luck.
P.S. check the connections on them may get lucky.

Mar 17, 2012 | 1998 Plymouth Neon

1 Answer

On My EX-Wife's 1996 Plymouth Neon 2.0 SOHC, There's oil on the buisness end of the #3 Spark plug wire. Is this normal?


it sounds like the cam cover is leaking in to the spark plug hole to fix this you will need to replace the gasket ir remove the cover and re-seal it using a high temp sealent





if this helps let me know


cheers
big mike

Jul 12, 2011 | Plymouth Neon Cars & Trucks

2 Answers

Common engine problems in a 98 plymouth neon


go to dodgeproblems.com/neon--this sight will tell all!! have a good day!! just click on your year vehicle when page comes up.

Nov 03, 2010 | 1998 Plymouth Neon

1 Answer

New radiator for 96 plym neon is too large. old one was much smaller. 2L SOHC 16 valve engine, no AC, what gives? Are there 2 diff engines for 96 neon?


Yes there is 2 different engine, 2.0L SOHC, and 2.0L DOHC, but autoparts stores show a few different sizes available, with AC, and without, as well as cooling fan mounts location. Better take lots of measurements and head back to parts store. That's one good reason for taking old part in with you, when at all possible.

Dec 03, 2009 | 1996 Plymouth Neon

2 Answers

Blue smoke from tail pipe 98 neon no leaks i can see


It sounds like you could need some new piston rings. when they go bad it causes oil to get by into the combustion chamber and burn when the engine fires.

Apr 20, 2009 | 1997 Dodge Neon

1 Answer

Wanting to put a trade a 98 dohc motor to a 97 sohc


may i suggest the neons.org engine swap forum

Apr 06, 2009 | 1998 Plymouth Neon

2 Answers

I have a 98 neon and the cooling fans would not come on when engine would heat up. I used a jumper wire to the fans and both work great. I replaced the solid state fan relay and they still do not cycle...


I have a 98 neon 2.0 sohc its leaking oil from passanger side near timing belt cover and leakin quick any ideas possible the cam seal? or rod? i dont think its head gasket

Dec 04, 2008 | Dodge Neon Cars & Trucks

Not finding what you are looking for?

Open Questions:

0 Answers

I am having trouble with my speedometer not working occasionally and now my seat belt light is coming on sometimes too. Is this the instrument panel cluster? Or something else? 1998 Dodge Neon. Backstory is as follows: -We take very good care of it and have one dedicated mechanic. -It has only had two owners; my parents and I. -We replaced the battery 2 months ago. -Mechanic checked to make sure the speedometer sensor was working. -We have had issues with the radio for years where it will randomly turn on and off, typically brought on by a stuffed trunk OR wet weather. -The speedometer works until we hit a bump and then the needle flies up and down or sometimes just stops working all together. -Mechanic has made mention of there being some Chrysler specific battery cable that is a smaller side cable and it is not in good condition. -Currently, my problem is that I can't find an old 1998 Dodge Neon in the salvage yard because yards are doing a lot of 2002 and newer vehicles and automatically crushing the others. The meat and potatoes of my question is what direction do I go in? And what of these symptoms ties to each other? And will adding new solder to the points on the panel fix it or is it something else? I'm trying to find least expensive to most expensive options and I'm rather handy but can't drop an engine or transmission or anything so keep this in mind. My handiness ends at resoldering the pins BUT I do have a mechanic I trust, but I fear that maybe I'm not combining symptoms properly. I have the money to repair an item I KNOW is wrong but not to chicken hunt around for problems.

Mar 22, 2017 | 1998 Dodge Neon

See all 1998 Dodge Neon Questions

1998 Dodge Neon Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...