Question about 2002 Chrysler Concorde
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: what is wrong??
I read your problem.
Here is some information about you problem.
2000 Chrysler cocorde. has a 42LE transmission.
The code P0700, Will set for an internal Trans. controler fault detected. "" For any fault detected on a trans. this is the first code to set. After come the other ones.
If it come alone, you will need to make some test to determinate
If the TCM ( Transmission controler module) is fault.
P0731- Will set if ratio of input RPM to output RPM does not
match current gear ratio.
one of the commom problem of this code is a Trans. slipping condition. or other trans. codes related.
If you can go to a Trans. specialist for a proper diagnostic and possibles solutions.
THank you I hope this information work for you.
Posted on Jul 12, 2008
SOURCE: Code PO740 and PO700 show
Best to have a transmission place work on this.
Here are the meaning of the codes:
P0700 Transmission Control System Malfunction
P0740 Torque Converter Clutch Circuit Malfunction
It maybe cheap to fix like a bad sensor. Or it maybe something serious going on. Best to have a transmission shop check it out.
Posted on Apr 15, 2009
P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.
Posted on May 29, 2009
2 torx screws i beleive they are t15 long screws pull them all the way out but the light will only come out about 6 in unless u unhook wires
Posted on Jun 05, 2009
PO700=Transaxel control system
PO740=Torque converter lock up. No RPM's
I would take a good look at the transmission.
Posted on Jun 12, 2009
Tips for a great answer:
Sep 01, 2014 | 2002 Chrysler Concorde
Mar 03, 2013 | 2004 Chrysler Concorde
Jun 20, 2012 | 1996 Chrysler Concorde
Nov 23, 2011 | 1999 Chrysler 300M
May 10, 2011 | Chrysler Concorde Cars & Trucks
Mar 14, 2010 | 2001 Chrysler Concorde
Jul 12, 2008 | 2000 Chrysler Concorde
505 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: