Question about Nissan Cars & Trucks
Light do not come on in reverse, all other lights are working
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Buy a auto repair manual for your respective truck, or go to the Nissan dealer and ask a tech to show you where the actuator switch is located, and replace that switch. That is the only thing left to replace. That should fix it. Also you could use an Ohm meter to check the switch to see if it is bad. Also check for a broken wire when you remove the actuator switch.
Posted on Dec 16, 2008
I had a similar problem with a sienna and sometimes the cable ( inside the door) between the handle and the latch gets stuck in the sleeve. Kind of like the brake cable on a bike.
take the panel off by removing all the screws you can see on the panel and pull the panel off. There will be plastic pins holding it. Some of them may pop off and some will break off.
Drip oil down the sleeve so the cable slides freely. I used bike chain oil. Do not use WD40. This is **** and will not work for very long. Try the handles a few times before you put the panel back.
Posted on Mar 03, 2009
FIRST REMEMBER THERE ARE SEVERAL FUSE BOXES.. NORMALLY THE CIG FUSE IS IN THE UNDER HOOD POWER DISTRIBUTION CENTER OR FUSE BOX.... A VERY GOOD RULE OF THUMB I HAVE FOUND IS TO CHECK ALL THE FUSES IN THE FUSE BOX....THIS USUALLY PREVENTS CHECKING THE WRONG FUSE AND IT ONLY TAKES A SECOND TO DO IT
Posted on Sep 01, 2009
you can buy a code reader from an auto parts store that will give you the ability to reset the check engine light, or most parts stores have one that they use on customers cars at no charge. if you ask them to read which code your car is throwing, most of them will let you hit the button to clear the code. they aren't supposed to do it themselves for some reason, but from my experience they will let you.
Posted on Oct 22, 2009
Tips for a great answer:
Apr 25, 2017 | 2004 Nissan Murano
Mar 07, 2016 | 2009 Nissan Murano
Feb 10, 2016 | 2003 Nissan Murano
Jan 03, 2015 | 2005 Nissan Murano
Sep 28, 2014 | 2005 Nissan Murano V6
Oct 26, 2013 | 2007 Nissan Murano SE
Feb 21, 2010 | 2006 Nissan Murano
Jan 20, 2010 | 2003 Nissan Murano
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: