Question about Cars & Trucks

Open Question

Tappet noise after engine oil change toyota vitz 2007

Tappet noise after oil change

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 61 Answers

SOURCE: temperature light of vitz toyota

Check your coolant level first then start having sensors checked. Could be a bad sensor or wiring issue.

Posted on Jun 22, 2008

  • 34 Answers

SOURCE: red oil light flashing, oil change no problem but

you will have to check your oil pressure with an oil pressure gauge. it could be a problem with your oil pump ( or a blocked gauze on the oil pump) and the tappets noise is related to the oil pressure.

Posted on May 13, 2009

  • 3 Answers

SOURCE: Tappets making a constant noise

i would suggest asking your mechanic which viscosity(thickness) oil he put back in and check it against the manufacturers recommendation as if it isto thin then it will make your tappets unusally noisey if he has put in the correct oil then i would say that they were quiet because of the old gungy oil and they either need adjusting or if they are hydraulic then the lifters need replacing

Posted on Jun 01, 2009

  • 1 Answer

SOURCE: manual of my car Toyota vitz 2000

I need user manual of Toyota vitz 2000

Posted on Sep 01, 2009

  • 126 Answers

SOURCE: Toyota Vitz 2000 user manual

u can try toyota website or autozone ur local libray

Posted on Sep 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to solve hydraulic tappet noise in Toyota 5k engine I replaced the head with another hea with new valve seals etc


If you are using the recommended oil for your engine then use a higher viscosity oil. Avoid synthetics with high flow rates. How to Fix Noisy Tappets Lifters

Mar 04, 2015 | Toyota Cars & Trucks

1 Answer

I've changed the engine on toyota vitz 2003 model all running fine on mechanical side but the engine light,abs light and hand barake light stays on while engine running please could some 1 tell wh


No idea in all honesty and i would need a play under the bonnet to find the problem but my main suspect would be a damaged wiring loom ,caused by taking the engine out the top ,i always lower the engine out through the bottom thus ensuring less damage to anything

Apr 17, 2013 | 2007 Toyota Yaris

2 Answers

Getz 2007 46000km has like a tappet noise coming from motor car starts and runs well we have only had it 2 weeks and had been looking 4 3 months 4 a car was gonna buy a toyota corolla but chose 2 buy the...


drain the oil flush the engine then put in good grade of oil the tappet is sticking as hyundais have trouble getting oil round the engine this wont stop the problem but will make the noise go away until you can get the tappet replaced

Sep 18, 2011 | Hyundai Accent Cars & Trucks

2 Answers

Driving manual for Toyota Vitz model 2000 fully automatic


The name "Toyota Vitz" has been used consistently in Japan, with most international markets receiving the same vehicle under the Toyota Yaris name, or formerly as the Toyota Echo in some markets for the first generation.

Then, I just could send this link:
- 2000 - 2002 Toyota Echo Service Manual (Pass: pdftown.com )
- 2007 Toyota Yaris Factory Repair Manuals

Good luck (remember to rate this answer).

Feb 11, 2011 | Toyota Yaris Cars & Trucks

1 Answer

My Toyota Vitz has a problem of engine knocking even when the engine is cold. the knocking reduces if i press hard on the gas, other wise it knocks while shifting and initial pick up as well.


Knocking can be caused by a bad bearing somewhere in the engine. When the engine is accelerated it might go away due to higher oil pressure.

When did you have the oil changed and how many miles does it have?

Is the knocking rapid (5 or 6 times a second) or periodic (1 or 2 times a second)?

Some knocking is due to low octane gasoline if you experience it at highway speed.

Good luck on solving this knocking problem.

Oct 07, 2010 | 2007 Toyota Yaris

1 Answer

Hi, i have a toyota fielder 1.8cc with a some problem which has now come up. when i switch on esp in the morning after staying overnight, it produces some really annoying sound from the engine. when the...


If it is a 'squealing' noise it's probably the alternator/power steering drive belt. Before you turn on the engine in the morning, lightlt smear or spray some oil on the inside of the drive belt to lubricate it. If the squealing stops/disappears, then that's the fault ..

That squealing noise can be caused by an incorrectly tensioned belt, or a worn belt. Replacement is the only option.

The other frightening sounds can best be described as 'rattles' or 'tapping'. When a car stands overnight all the oil drains back into the sump (oil/pan).

There are two things (usually) that can be cause the rattle/tap:
1. Because the oil hasn't been pumped around the system, at start up worn big end bearings can rattle and tap on the crankshaft until the oil 'fills the gaps'. The tapping/rattling goes away as the engine warms and oil is pumped around the lubricating system.

A 'bottom end tapping' is a symptom of worn big ends (they are bearings at the bottom of the piston and fit around the crankshaft).

2. A rattle/tapping from the top of the engine can either be a worn camshaft or 'lazy tappets'. Again, when the engine warms and oil gets to the camshaft and tappets (also called 'hydraulic lifters) the noise will disappear.

If your car has this rattling/tapping noise - identify whether it is coming from just under the rocker box (ie the camshaft/tappets..) or the bottom end of the engine (big end bearings).

If the noise is coming from the top of the engine, try an oil change with a can of thick 'additive' included. A lazy tappet (lifter) isn't too much to worry about. A worn camshaft will affect the performance of the engine, though continue to do its job. An oil change with an additive included may help in quitening things down.

A bottom end tap/rattle (or 'knock') - the sooner that is sorted out the better.

Aug 16, 2010 | Toyota Corolla Cars & Trucks

1 Answer

A 2006 chevy 4.7 v6 engine makes initial tappet noise at first startup. engine has 35500 orig. mi. on engine


Try using an oil additive designed to loosen tappets with your next oil change. Maybe a change of oil brand can help. Changing out the offending tappet is the ultimate repair, but most expensive.

Sep 27, 2009 | Chevrolet 1500 Cars & Trucks

2 Answers

Manual of my car Toyota vitz 2000


I need user manual of Toyota vitz 2000

Apr 10, 2009 | 2007 Toyota Yaris

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...