Question about Dodge Avenger
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
rate as fixya if this is what you need. Thanks
Remove the brake pads by pushing inward and rotating the pad up.
Retract the caliper piston (2196) into the rear disc brake caliper.
Posted on Mar 15, 2009
Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.
Posted on Jun 02, 2009
SOURCE: dodge avenger 2008
It depends on who you go to and if you want it done right. I went to the Dealership and had them put front brakes on my 2008 Dodge Avenger and it has been in the shop every 2-4 months since then for front brakes. They replaced the entire front brake system and my 08 Avenger is still eating brakes. I finally took it to a friend who owns a auto repair shop he replace the rotors which are total about 115.00 for each from AutoZone and replaced the brake pads for 50.00 so it cost me just parts 155.00 and my Avenger is running smoothly since haven't had problems with the brakes since. Go to Midas and let them change it for roughly 89.00 avoid the dealership at all cost they can run 200.00-500.00 depending on if it is just the brakes pads or if it is the rotors and pads.
Posted on Jun 02, 2009
no, 12mm wrench or ratchet on 12mm socket. the piston is tough to push back in. its a twist in type and you will need some force to push and twist the piston back in. - note rear brake pads wearing out on the new 08-09 accords are very common and if under 16-18 thousand miles it may be covered. honda knows about this problem
Posted on Oct 27, 2009
You Will Need A 13-14 mm Wrench for Caliper Bolts .A Large Flathead Screwdriver to Spred open Caliper/Shoes to Remove Caliper from Rotor,
After rhis you Can use a LARGE "C" Clamp to CLOSE Caliper Piston.
Posted on Nov 06, 2009
Tips for a great answer:
Dec 03, 2014 | 2008 Dodge Avenger
Sep 02, 2011 | 2008 Dodge Avenger
May 12, 2011 | 2008 Dodge Grand Caravan
Feb 22, 2011 | 2008 Dodge Avenger
Oct 27, 2010 | 2008 Dodge Grand Caravan
Aug 29, 2010 | 2008 Dodge Avenger
Mar 07, 2010 | Dodge Caravan Cars & Trucks
Dec 18, 2009 | 2008 Dodge Avenger
Sep 23, 2009 | 2008 Dodge Avenger
Oct 14, 2008 | 2008 Dodge Avenger
Dec 17, 2017 | Dodge Neon Cars & Trucks
512 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: