Question about 1998 Mazda 323 1.3

Open Question

I need 1995 mazda 1.3l con.rod torque specification

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 141 Answers

SOURCE: Need torque settings for head bolts please., Order the book is cheap and convenient, they mail it to You.

Posted on Jan 22, 2009

  • 466 Answers

SOURCE: torque spec

35 37 Ft Lbs o 48 50 N.m

Posted on Aug 02, 2009

  • 2002 Answers

SOURCE: What is the best for mazda tribute 2001? v6 2wd 3L

The best battery is the biggest one that you can fit in the battery box. There is no such thing as too much battery. The one that came in your car from the factory is the smallest one they could get to do the job. Certainly you should be in the 500 CCA (cold cranking amps) range, especially if you live in a cold climate. Hope this helps.

Posted on Oct 07, 2009

  • 280 Answers

SOURCE: mazda 2000 B2500 main, rod+cil head bolt torque

call your local auto zone-they can give them to you

Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What are torque settings for the main bearing bolts and con rods on a ford/Mazda w e series 16 valve turbo diesel motor?

main bearings will be about 70lbs and the con rods about 40lbs ,my manual is in the garage not at home sorry

Oct 06, 2015 | Cars & Trucks

1 Answer

Hi.Good morning! please till me what is the specific torque of isuzu 4ba1 con rod cap bolts,main bearing cap bolts and cylinder head bolts?

go on line and type in torque specifications for isuzu 4b1a engine
there may be a pdf version that you can down load

Jul 25, 2015 | Isuzu Cars & Trucks

1 Answer

Rod torque spec

What are the torque specifications for a 1969 mustang boss 7/16 con rod bolts? The con rod part number is C9ZF-D.

Jan 03, 2014 | 2005 Honda Civic Hybrid

1 Answer

Need torque settings for mazda xa 3.0l diesel 4 cyl

con rod bolt tension is 55-60ft/lbs
crank shaft main bearings is 80-85 ft/lbs
fly wheel bolts95-100 ft/lbs
crank shaft pulley nut 94-123 ft/lb
head studs tension 80-95 ft/lbs working in a spiral direction from no 1 stud directly in the centre of the head. Pull down in 10ft/lb increment starting at 20 ft/lbs
valve clearance is .010" both valves cold but after warming engine and re-tensioning the head studs re set valves to .012 both valves
injector retaining nuts tension12-17 ft/lbs

Dec 25, 2013 | Saab 9 Cars & Trucks

1 Answer

I need the torque settings for the con rod on a Clio 1.5td 52 plate.

buy the book that specifies all torque settings trust me if you buy a 20 dollars book many headaches will go away,all cars have a specific manual that usualy comes with the vehicle,but car manuals are available at car parts stores ,even the computer is slow compared to the index of this book and it s specifications.on the lighter side I torqued mine at 30lbs

Dec 07, 2012 | Cars & Trucks

1 Answer

Does anyone have the bolt torque specifications for a ford 1995 5.8L. I need the cylinder heads, crankshaft mains and connecting rod torque.

Head bolts, 105-112 Foot pounds (Final torque)
Final torque must be reached in 3 equal steps. Recheck final torque in sequence.
Main Bearing Caps, Torque in sequence Step 1: torque to 50 Ft/Lbs Step 2: torque to 105 Ft/Lbs
Rod Bearing Caps, 45 Foot pounds (Final torque)

May 31, 2010 | 1995 Ford F150 Styleside Regular Cab

1 Answer

What are the torque specs for the piston rods and head bolts

The connecting rod bearing cap nut on a four cylinder is 40 ft-lbs. The cylinder head bolts are torqued in four steps.1-45 ft-lbs 2-65 ft-lbs 3-65 ft-lbs 4 1/4 additional turn after reaching torque specification. On the V-6 & V-8 the connecting rod cap nuts at 45 ft-lbs and the headbolts are torqued in two steps 1-50 ft-lbs and 2-105 ft-lbs. Hope this will help you.

May 16, 2010 | 1995 Dodge Dakota

2 Answers

Getting access to the big ends

This link will give you FREE or PAID - select FREE - it will download a 96 Engine but the engine is the same as you have in the basics. You must have a PDF reader it is free to download and use and most everyone has it but if not please download it HERE
There is an additional helpful thing for you - - please take down the vin number - and go to the dealer - the dealer for FREE will print out your specific engine rebuild needs specific for your engine based on your unique Vin number. This is more and more common due to changes mid year where as in the early days engines remained the same for years longer and now they change mid-year often. Also CHECK for RECALLS on your Vehicle.

I hope this does you good. PLEASE RATE ME HELPFUL - It really makes a difference for me.

Thanks and let me know how this goes with a comment please.

May 11, 2010 | 1995 Mazda MPV

Not finding what you are looking for?
1998 Mazda 323 1.3 Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides