Question about 2004 Toyota Corolla

Open Question


Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 918 Answers

SOURCE: smelly air con 2004 toyota corolla

to acces to air filter first remove glovebox

Posted on Jul 05, 2009

  • 1861 Answers

SOURCE: Air con not working in 93 corolla seca.

Hello. Thnaks for choosing FixYa for assistance.

The A/C compressor will not engage (get power) if there is not sufficient freon in the system. There is a pressure switch that opens, and eliminates power to the compressor (pump) if there is not enough freon (which creates pressure), to close the switch and allow the current to flow to the compressor. Check for leaks at the condenser (in front of the radiator).
That is the most common place for leakage to occur.

The graciousness of a FIxYa rating for my assistance would be greatly appreciated. Thnanks in advance.

Posted on Jan 25, 2009

  • 410 Answers

SOURCE: where is the air cabin filter in a toyota corolla 2006 ?

If it is like the 2003 Toyota Camry I just worked on it is located inside the glove box.  You have to actually take the glove box out to get to it but it doesn't take more than 5-10 minutes.

Posted on May 18, 2009

  • 333 Answers

SOURCE: How do I remove brake drum on 2005 toyota corolla

Under normal circumstances, the drum should slide right off once the wheel is removed.

If you have built up rust holding it on, there are two threaded holes near the center of the drum to aid in removal.
Insert two 12mm bolts into the holes and, while adding plenty of lubricant, turn the bolts in even amounts until they push the drum off.
Be sure to keep them lubed, as they will strip out easily if not.

If you have aftermarket drums without the holes or the screwholes are stripped out, smacking the face of the drum with a dead blow hammer will help free it up, but takes much longer for success.

Posted on Oct 17, 2009

  • 524 Answers

SOURCE: 91 toyota corolla automatic how do i put air

You need an air chuck, and i would recommend about 35 psi in there, hopes this helps for you

Posted on Apr 01, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Received a P219a code read out for my 2012 toyota corolla what can I do?

P219A - Bank 1 Air/Fuel Ratio Imbalance

Possible causes - Leaking or contaminated fuel injectors - Low fuel pressure or running out of fuel - Leaking evaporative emission (EVAP) canister purge valve - Exhaust or intake air system leaks - Exhaust gas recirculation (EGR) system - Positive crankcase ventilation (PCV) system is leaking or the valve is stuck open - Ignition system - Incorrectly seated engine oil dipstick, tube or oil fill cap

Dec 23, 2016 | 2012 Toyota Corolla

1 Answer

How long will it take to lose all air con gas and oil in the system but the garage said i have no leaks at all?. 10 plate golf gtd

air con needs regassing when vehicle about 4 yrs old as a rule ,if garage says no leaks then ask them to explain how it works as if you have clima then you may be turning to econ and this means economy so the Ac isnt on

Apr 30, 2011 | 2003 Toyota Corolla

1 Answer


it is generally because the air con heat exchanger has to be cooled in order for your air con to work correctly and cool the interior of your car.

The air conditioning utilises a gas by the name of freon. This gas is pumped around the air con system by a compressor. The gas, going through the aircon cooler or heat exchanger, starts to cool down. Depending on the system layout, the gas is forced through a very small aperture situated after the cooler. It reverts to a liquid, passes through the matrix in the car, a fan blows the interior air of the car through the matrix. The fluid picks up the heat, and cooler air exits the matrix and, (hopefully) cools the interior of the car. This endless cycle is repeated as long as the air con is powered on.

Hope this brief description will suffice.

Jan 25, 2011 | 1988 Toyota Corolla 4 Door

1 Answer

1994 toyota hi-lux dual cab. a very bad smell is coming from the air-con. how do i go about getting into the air-con.

what this is fungus that grow's in the evaporator core. can buy stuff from auto part's store but it take's awhile to get out the best way is to take to a/c shop let them take care of it breathin it can cause to get sick..if got kid's get rid of it fast..

Dec 17, 2010 | 1994 Toyota MR2

1 Answer

Idle getting high when aircon is turned off

there should be a sensor that bumps the idle up when you load the engine by turning the air/con on
if this is unservicable the rev,s will stay high when air/con is off

Sep 17, 2010 | 1990 Toyota Corolla

1 Answer

Smelly air con 2004 toyota corolla

to acces to air filter first remove glovebox

Jul 05, 2009 | 2004 Toyota Corolla

1 Answer

Cabin Air Filter 2002 Corolla

Toyota initiated cabin air filters in Corollas starting in 2003.

Jan 03, 2009 | 2001 Toyota Corolla

3 Answers


These codes are all for the Evaporative Emissions System.

P0440- Evaporative emissions system fault- just saying there's something wrong with the system.

P0441- Evaporative emissions system- Incorrect purge flow- saying that the system isn't purging the raw fuel vapors (hydrocarbons- HC) as well as it should.

P0446- Evaporative emissions system- Control valve circuit low- there is a valve, usually located on the charcoal canister at the rear of the vehicle, that opens to allow fresh air to enter the evaporative emissions system as the engine vacuum purges the fuel vapors from the charcoal canister and closes when purge is not needed to prevent leakage of those fuel vapors to the atmosphere (HC is a greenhouse gas and is regulated as such by the fed gov't).

Given that you have the incorrect purge flow code and the control valve code together, my bet is that the vent control valve has failed (causing the P0446) and is not opening to allow fresh air into the system to displace the air from within the system that is being pulled to the engine. Since you have no fresh air entering the system, the engine will pull a vacuum on the system instead of the vapors "flowing" into the engine (causing the P0441).

I hope that this is helpful to you!!!

ASE Master Technician with L1 and X1 Certifications; Nissan Scope Technician; Chrysler Level 3 Silver Technician- 12+ years experience.

Nov 17, 2008 | 2001 Toyota Corolla

Not finding what you are looking for?
2004 Toyota Corolla Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides