Question about 2004 Pontiac Grand Am

1 Answer

Fuses and auto remote starter

Where do i locate the fuse box and auto remote starter?

Posted by on

  • Anonymous Mar 13, 2014

    where are the fuses for 2009 impala remote start located

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The fuse box is on the dirvers side of the car - open the door and it is right there on the side of the dash near the front of the panel. Very accessable. I'm not sure where the auto remote starter is.

Posted on Nov 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing a fuse engine wont start 2005 hummer h2


Is the anti-theft light lit on the instrument cluster ? Won't start how ? When you turn the key to start , what happens ? Nothing ? This would be a No crank - no start condition . Now if you turn the key to start and the starter engages and spins the engine and it doesn't start an run , this is a engine cranks no start condition ! Now which is your problem ?

There are two fuse's IGN A fuse 40amp and IGN E fuse 10amp ,both are located in the under hood fuse/relay box . Also there is starter relay located in the same under hood fuse /relay box . There also is a crank fuse 10amp in the under hood fuse box . Besides the fuse's and relay ,the ignition switch or the PNP - park neutral position switch could be bad . Testing the whole starter circuit should be done ! How to voltage drop test starter motor circuit

Jan 22, 2017 | Hummer Cars & Trucks

1 Answer

Where is the starter relay for 2008 5.7 dodge magnum


The relay should be located in the integrated power module, under the hood. My info showed this.

starter-relay-2008-5-7-dodge-magnum-q5x51mpy1oz0givoejoxaaqf-5-0.jpg

Dec 24, 2015 | Dodge Cars & Trucks

1 Answer

R these the relay for the pcm and tcm on a 2006 pt cruiser


the left is the starter relay and the right is the auto shut down relay
the pcm relay is the auto shut down relay and the pcm relay is located in the fuse box on the engine comparment

Jun 09, 2015 | 2006 Chrysler PT Cruiser

1 Answer

Ford figo fuse box location


Fuse boxs location:
  • The engine compartment fuse box is attached with the battery tray in the engine compartment.
  • The passenger compartment fuse box is located behind the glove box in the instrument panel.

On this website (link below) you find fuse box diagram (layout) and description for Ford Figo
Ford Figo 2010 fuse box diagram India version Auto Genius

Sep 26, 2013 | Cars & Trucks

1 Answer

Where is the fuse located for the alternator? i took the positive cable off and it died i wanted to check the fuse first which #fuse is it?


the fuse box under the hood is known as the (BJB) that is where you will find fuse for your alternator
location number for the fuse is F1.10 it is a 1amp fuse, there is another fuse which is an inline fuse, most likely the one your looking for 175amp location it does not specify, but red wire comes from the battery to the starter motor, from the starter motor to the alternator, the inline fuse is in the wire from the starter to alternator, there is n location for it, but easiest way is to check for voltage at the alternator, as inline fuse will be close to there, so if your there, just check at alternator for voltage
sorry it is not located in fuse box and the fuse for alternator in fuse box control the light on your dash

good luck, if i can help any further just ask

Thanks
Jay

Jun 30, 2011 | 2006 Ford Focus

1 Answer

My car will not start. I don't hear the relay clicking when key is in the "on" position. When the key is turned to "start" nothing happens there either. Brand new battery, checked...


Hi before you take the dashboard out check the following (if it is the starter relay they are usually
on the fuse board which will be behind a panel on the lower part of the dash or a separate fuse box
in the engine bay)
To find out if it is the starter or the starter electrical try this procedure.
Make sure the key is OFF then go to the starter ( i think its not to bad to get at )
On the starter there is a big terminal ( +cable from the battery always live )
and a small terminal which is the small wire which becomes live when you turn the key
To find out if the starter is ok simply put a screwdriver across these two terminals mommentarily
With the transmission in neautral or park if auto box
If the engine turns over then you know the starter is ok and the problem is the supply from key swicth to starter which could include a relay
Also if the car is auto box then there will be a swich on it which could be faulty
I hope i have been able to help you with this problem John ( South Wales UK )

May 05, 2011 | Volkswagen GLI Cars & Trucks

2 Answers

My 2002 Mazda Protege was jump started with the polarity reversed on the jumper cables. Now the power windows, interior lights, heater, a/c, remote door locks, and radio do not work. I have checked all...


Hi and welcome to FixYa, I am Kelly
You have a fuse link/ Fuseable link) in the wiring from the battery to the fuse box that has probably failed. Go to any auto parts supply Napa, Auto Zone ect that has computerized parts break downs of your vehicle and ask them to show you where the fuse link is located. It will be inside the black plastic conduit material of the chassis electrical harness. Some Vehicles have more than one Fuseable Link. Make sure to ask when you check at the auto parts source if there is more than one and ask for the location of that one also. Most auto parts stores will show you the computer monitor with the location diagram of the Fuseable link.
Thanks for choosing FixYa,
Kelly

Mar 05, 2011 | 2002 Mazda Protege

2 Answers

Has new battery wont turnover, wont do anything when u turn the key dash lights up normal


may be that a wire from the starter motor has come off. ignition relay could be weak, or maybe even your starer motor is fried

Feb 26, 2011 | 2002 Oldsmobile Aurora

1 Answer

The engin will not turn over intermittently. I had the dealership check the batter, the starter and the alternator. All came out good. They could not get the car not to start so they could not fix it. ...


Try starting in Neutral instead of Park. If this works, the transmission range switch (sometimes called a neutral safety switch) is faulty in Park.

Next, you can try a remote start switch (available at auto parts stores) or a jumper wire to bypass the ignition switch. First make sure transmission is in park or neutral. You will be jumping from the battery positive terminal to the starter solenoid. The starter solenoid terminal has a black wire with a white stripe connected to it. (This terminal is visible just to the left of the automatic transmission dipstick tube.) Remove this wire and connect one end of the remote start switch wire (or jumper wire) to it. Connect the other end of the remote start switch wire to the battery positive terminal. Activate the remote start switch and see if the starter will crank. (If using a jumper wire, briefly touch the other end to the battery positive terminal and see if cranking will occur). If the starter works then you have a problem in the ignition switch, or starter cut-out relay.

The starter cut-out relay is located on the back of the driver's under dash fuse/relay box in the left wall kick panel. The ignition switch also has wire leads that plug into the back of this same fuse box. You can disconnect the wire leads and test the ignition switch with on ohm meter from this point.

Jan 23, 2011 | 2003 Honda Odyssey

Not finding what you are looking for?
2004 Pontiac Grand Am Logo

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...