- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Nov 25, 2012 - Uploaded by Mastermind Denver
This video shows why we at Mastermind Enterprises Auto Repair Shop in Denver recommend replacing the ...
Nov 19, 2014 - Uploaded by South Main Auto Repair
When I installed this water pump on the 2006 Chrysler Sebring 2.7L I ran into a ... 2004 Chrysler Sebring 2 ...
done properly it shouldn't. While it is difficult the water pump can normally be changed without pulling the timing belt. Although this is not always true. I highly recommend you get the Haynes Repair manual on that vehicle before starting this repair. There are step by step instructions with photos of the work so you can see the proper alignment. If you are going to have to remove the timing belt I recommend you take the time to go ahead and replace it. Since there will be specific steps to align the Crank and Cams to make sure the timing stays correct.
You didn't take it apart and therefore i suggest to leave it to him, you can get a manual and try, but i warn you one false step can leave you with the problem to have to take it all apart again, and that can be just mixing up two bolts and having one bolltom out instead of pulling in tight, just warning you
IF THE DRIVERS SIDE WINDOW IS WORKING IT IS NOT A FUSE PROBLEM AS THESE ARE ON THE SAME CIRCUIT. MOST LIKELY IT WILL NEED A WINDOW MOTOR/REGULATOR ASSEMBLY WHICH IS BETTER HANDLED BY YOUR LOCAL TECH. HOPE THIS HELPS!
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.