Question about Plymouth Voyager
There is one pulley(tension pulley) that your belt goes around that just has a spring. If you're confused about which pulley this one is, start the engine, it's the pulley that wiggles with the belt rather than just turning. It is also the only pulley that has a hex(bolt head) in the middle. It usually takes either a 15mm or 9\16 wrench. It will move only one way that gives slack in the belt, up or down. Getting the belt off is the easy part, getting it on will require some patience, when it's on right, it will be difficult to get the new belt on because it hasn't stretched out from heat and wear yet. Just be patient, and persistent, you'll get it. And watch your knuckles, a good fitting wrench, seated fully will help with this. Also, if the wrench gets in the way, put the belt on the tensioner pulley, and when you put slack in the belt, use an easier to get to pulley as the one you put the belt on with.
Posted on Feb 16, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
Posted on Mar 20, 2009
first thing you need to do is get a new belt that belt dressing just destroyed that belt that stuff is no good then get a new belt tensioner clean all the pullys with some brake clean then install the belt tensioner and belt if its still sqealing there maybe a pully making the noise to check that when you have the belt off spin them by hand and listen to them and feel for any play in the bearings
Posted on Jul 19, 2009
There should be a drawing of it on the front cross member at the front of the car. Mine is, I have the manual in front of me but like you say, there are quite a few different versions, I`ve just changed the serpentine belt on my chrysler grand voyager 2.5CRD diesel because the alternator froze up and wrecked the belt. It was a very simple job because the drawing was on the front cross member of the car. Let me know the engine and I`ll try to explain the routing to you. Ian
Posted on Jul 24, 2009
Here's a link to the diagram you need...
Good luck and please rate this solution. Thanks.
Posted on Oct 17, 2009
Testimonial: "Looks good."
Make a drawing of where the belt and pulleys are before you remove the belt. You won't need a diagram,you will have made your own and be done before you ever find one,unless you have a shop manual already.
Posted on Feb 08, 2010
Tips for a great answer:
Aug 30, 2011 | 1994 Plymouth Voyager
Apr 01, 2011 | 1994 Plymouth Voyager
Mar 05, 2011 | 1998 Plymouth Voyager
Oct 10, 2010 | 1994 Plymouth Voyager
Jul 01, 2010 | 1994 Plymouth Voyager
Dec 26, 2009 | 1994 Plymouth Voyager
Oct 29, 2009 | 1987 Plymouth Voyager
Oct 09, 2009 | 1998 Plymouth Grand Voyager
Jul 19, 2009 | 1999 Plymouth Voyager
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: