Question about 1992 Toyota Celica

1 Answer

Cranks but will not start

Car turned off at light and will not turn on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 17,970 Answers

Hi Jose:
You will have to pinpoint what the engine is missing...
- Spark
- Fuel
- Compression

All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.

Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 16, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It turns over but it wont start


Engine cranks but won't start. Troubleshooting tips

www.samarins.com/diagnose/index2.html
In this guide, we are going to look into no-start problems when the car engine cranks,but won't start. If your engine won't crank at all, check the first part No-start: ...‎Why a car won't start - ‎Crankshaft position sensor - ‎Check Engine light

Engine cranks but won't start - YouTube

? 8:03
https://www.youtube.com/watch?v=1L4nB2NdA0U
May 16, 2014 - Uploaded by jimthecarguy
2003 Ford Taurus 3.0 liter 24 valve no start cranks OK.You will not ... Car will not start trouble shooting guide, wont crank, wont turn over, etc.

Problem 5: Engine Cranks But won't Start



Jan 01, 2016 | Cars & Trucks

1 Answer

2007 Chevy Trailblazer cranks but wont start


NEEDS FURTHER DIAGNOSIS. CALL (517) 489-1566 BRING TO AUTOWORX IN W. LANSING. I AM THE OWNER JEFF

Mar 09, 2014 | 2007 Chevrolet TrailBlazer SS

1 Answer

1998 chevy asto van wont crank or turn over


Turn the headlights on and watch them while the key is turned to start. If the lights go out, one of your cables or connections at battery or starter is not good. If lights dim a lot but stay on, possibly a bad starter, it needs testing. If lights aren't affected by cranking position, turn lights off, pull the small wire off the starter solenoid, hook up a test light to ground and to the solenoid wire. Light should come on when key is held in crank. If it does, likely a bad starter solenoid. If no light, then the start circuit from ignition switch to starter solenoid is not working. Check for power out of ignition switch on the start wire with key in crank, to begin with. If powered, switch is good, need to check if neutral safety switch is good, and then check or swap in a new starter relay.
Post back with any results.
Good luck.

Jan 17, 2013 | Nissan Altima Cars & Trucks

1 Answer

Can anyone explain why my 1993 Cadillac Eldorado wont start after it sits overnight? Also, why does my interior lights jump on sometimes when I hit a bump then turn off when I hit the door panel. My car...


Cranks and starts are two different things.
If it cranks but won't start it could be loosing fuel pressure overnight.
If it won't crank in the morning, you could have a bad cell in the battery or something draining the battery overnight. Such as the interior lights coming on and off.
The light problem could be the door ajar sensor in the door latch.

Jan 08, 2013 | Cadillac Eldorado Cars & Trucks

3 Answers

Oldsmoble Alero ignition security problem


It doesn't have to be the security. a dead battery won't let the car crank either. With a security problem the car will crank but not start. The security can be reset if the battery is charged and up. Turn the key on ( do'nt crank ) the security light will stay on if it needs to be reset. If it remains on leave the key on for 15 minutes around then it will go out. turn the key off and then turn it right back on, the security light will be on again. Leave the key on till the light goes out again, then turn it off then turn it back on , wait again when it goes out turnthe key off then right back on then crank the engine and it should start. With a scanner the code will be security neweds to be reset. Thia is all anyone can do to reset the security and it's what you were charged $450 for. Following directions.

May 18, 2010 | 2001 Oldsmobile Alero

3 Answers

Start's great at times,then won't turn over,starters good


yes the switch would cause that problem with the brake light but not the dash lights, these cars had problems with the ignition swith and the chip reader on the ignition, hope this helps.

Jan 20, 2010 | 1998 Oldsmobile Intrigue

1 Answer

I turn my truck off and went back to start it and it would not start it trys to all the lights come on when turn key on


does it crank over? if not you turn your lights on and try cranking, does the head lights go dim? if yes check connections on starter, if not check connections on battery and the start wire on the solinoid.

Aug 17, 2009 | Dodge Ram 1500 Cars & Trucks

2 Answers

Car wont start, will not reset, security light always on


try locking and unlocking the drivers door with the key. [sometimes if you reach to un lock door through window it it sets off security]

May 15, 2009 | 2003 Oldsmobile Alero

1 Answer

1999 Continental will not start


Does anti-theft light come on for a sec then turn off when you turn on the key or does it flash with key on?
You said that CEL turns off while cranking,does it come back on if you continue to crank after about 8-10 seconds of cranking?
If it does not then your PCM is not seeing a signal from the crankshaft postion sensor.You can try wiggling the harness at the crankshaft postion sensor and see if it will start.

Jan 31, 2009 | 1999 Lincoln Continental

1 Answer

Engine willnot crank


You will need to check for a crank signal at the starter solenoid.

Oct 15, 2008 | 1999 Dodge Stratus

Not finding what you are looking for?
1992 Toyota Celica Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...