Question about Cars & Trucks
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This indicates that a part of the EVAP control system is no longer fuctioning correctly. The EVAP system consists of many parts, including (but not limited to) the gas cap, fuel lines, carbon canister, purge valve, and other hoses. Try changing the gas cap first then check the rubber hoses that are visble on top of the engine. Vote "Yes" for me!
Posted on Aug 18, 2009
SOURCE: engine light on Codes show
Hello! Those three codes commonly indicate the followi possibilities:
The gas cap was not sufficiently tightenend ater fueling, a bad gas-cap rubber o-ring, the vehicle had the key in the 'on', or engine running, or the tank was filed all of the way up the neck.
Any one of the abope causes will set all three codes.
Posted on Dec 21, 2009
The EVAP cannister is part of the emissions system. Excess exhaust runs thru it-purge flow is when it is released. Check all the vacuum lines going to it. I don't you will find a parts listing for a purge flow valve or vent or solenoid. Your light will probably come on again shortly.
Posted on Mar 15, 2010
Hello... This light indicates that you might have a problem with your Electronic Power Steering (EPS)...
Have a shop check it out...
Posted on Mar 26, 2010
Tips for a great answer:
Sep 20, 2016 | 2006 Hyundai Elantra
Sep 09, 2016 | 2006 Hyundai Elantra
Jul 22, 2016 | 2003 Mitsubishi Outlander
Apr 09, 2016 | Hyundai Cars & Trucks
EVAP System Incorrect Purge Flow (Stuck Open)
Charcoal canister is damaged, clogged or restricted.Purge solenoid control circuit open, shorted to ground or power.Purge solenoid power circuit is open (check the relay or fuse).Purge valve vacuum line is clogged or contains water or debris.Fuel filler cap loose, cross-threaded, incorrect part or damaged.Fuel tank or fuel tank sender assembly 'O' ring is leaking.Fuel tank vapor line(s) blocked, damaged or disconnected.PCM has failed.Here are the causes.
Nov 25, 2012 | Cars & Trucks
Oct 04, 2011 | Hyundai Motor 2002 Sonata
Jun 04, 2009 | Hyundai Motor 2002 Sonata
Aug 09, 2008 | Hyundai Elantra Cars & Trucks
352 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: