Question about 2006 Pontiac G6
Fold down rear seats to trunk access
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
open the trunk and look under speaker molding you will see two pieces black latches pull them down and push the seats with other arm.
Posted on Jul 08, 2009
It's a monster pain to get to them, but it's doable. Once you empty the trunk, you'll see 4 black knobs - approx 1.5 inches in diameter. You'll need to remove all of these (they just unscrew, but they are plastic, so be careful not to strip the threading) in order to access the rear light assembly.
They're in there snug, but once you find the appropriate sized socket (I wish I could recall well enough to tell you what size, b/c I remember that it WAS an odd size), you'll have to remove all 3 bolts and then push the whole assembly out from inside the trunk.
Once the assembly is out, you will see the rear of the sockets, which simply push and turn to get the lamps out of. As long as you have everything open, I suggest changing ALL of the lamps (brake, tail, and turn signal) on BOTH sides, since the lamp life for all of these is about the same and it's such a pain to get to them in the first place.
Posted on Apr 13, 2009
Had same problem with my '04, yank HARD, lol. Warehouse guy walked up, grabbed the cord and bang! up it popped. Good Luck.
Posted on Jan 30, 2009
Its unlikely the belt is locked, most likly the belt is twisted down inside the gear which locks up the gears. By law a shop is not supposed to work on seat belts, they are supposed to replace them. If your brave enough try to peel back the plastic housing where the belt goes down into the main unit. If you see the belt twisted sometimes you can use a small screw drivers to release the latch and pull the belt out. Otherwise you'll need to order a replacement belt & have it replaced.
Posted on Jul 09, 2009
Once you open the trunk you need to unscrew the 2 little black knobs that hold the cargo nets on. This will release the truck carpeting. Pull the carpeting back and you will see the gray metal around the backside of where the taillights are. There are two nut/bolt combination that you will need to unscrew (If these are not too tight and use a regular pair of pliers to grip them). Once these two nuts/bolts are removed push on the screws that they were attached to... This will push the entire tail light out of its place on the back side of the car and you can pull it out now to get to the lights. There are 3 lights that will come out if you turn the black fittings and then pull out.
Posted on Jul 09, 2009
Tips for a great answer:
Dec 17, 2015 | Cars & Trucks
Nov 11, 2015 | 2011 Buick Regal CXL
Jul 26, 2015 | Cars & Trucks
Sep 05, 2011 | 1999 Pontiac Grand Am GT
Jan 20, 2011 | Pontiac Sunfire Cars & Trucks
Jan 17, 2011 | 2003 Kia Optima
Dec 01, 2010 | Chevrolet Cavalier Cars & Trucks
Feb 15, 2010 | 2004 Toyota Corolla
Jul 08, 2009 | 1999 Volkswagen Cabrio
1,870 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: