Question about 1999 Dodge Stratus

1 Answer

Heater core hoses

Need to see diagram of hoses to heater core to back flush it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 5,370 Answers

Regarding this types of problem,i suggest you to go through this help links.Click the link below to go through the procedure and troubleshoot the problem :----HOW TO REPLACE AN UPPER RADIATOR HOSE

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-upper-radiator-hose.html

-------------
HOW TO REPLACE A LOWER RADIATOR HOSE http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-lower-radiator-hose.html
----------How to Flush Heater Core? http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html
------------

For heater core replacing procedure. I suggest you to go through this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models?

Click the link below: ---

http://technoanswers.blogspot.com/2011/11/how-to-replace-heater-core-for-all-car.html

--------------
How to Flush Heater Core?

http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html

---------------
How to Remove Heater Core ?

http://howtobyme.blogspot.com/2011/12/how-to-remove-heater-core-on-2008-honda.html
Heater Core Replacement?

http://howtobyme.blogspot.com/2011/12/honda-heater-core-replacement.html

------------
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------

How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to replace heater core on Buick Regal?

http://howtobyme.blogspot.in/2012/02/how-to-replace-heater-core-on-buick.html
----------This will help.Thanks.

Posted on Feb 18, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76846 Answers

SOURCE: flush heater core

PULL THE HEATER HOSES OFF IN THE ENGINE BAY, THEN USE A GARDEN HOSE AND FLUSH THE CORE IN BOTH DIRECTIONS, IF U SEE NO RUSTY WATER OR THE WATER GOES RIGHT OUT THE OPPOSITE SIDE U ARE FLUSHING U DON'T HAVE A HEATER CORE PROBLEM

Posted on Mar 24, 2009

rcaston19
  • 39 Answers

SOURCE: Cool air blowing from heater, even when on high.

if the heater core is bad, it will leak or not flow water. even tho you can "hear" the blend door working, it may not be actually moving inside the box. check to see if the actuator is connectd to the blend air door. You may be hearing the actuator moving but not the door.

Posted on Nov 22, 2008

dennymulford
  • 1055 Answers

SOURCE: heater doesnt get hot

is their a control valve in the heaater hose?
if so it could be stuck

Posted on Mar 04, 2009

j_del
  • 1586 Answers

SOURCE: BOTTOM RAD HOSE COLD TOP HOT. ENGINE TEMP ABOUT

Did you burp the air out of the system after changing those parts? It sounds like the thermostat isn't opening which is why the lower hose is still cold. Click my screenname, go to my tips and tricks, and choose the one about burping the cooling system - it may help you out.

Posted on Jan 28, 2010

  • 3640 Answers

SOURCE: No heat from the heater

check this site out !! http://www.automotix.net/partshotline-do...
your heater control valve might be faulty also. have a good day !!

Posted on Dec 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Heater blows cold air--where is heater control flap or switch?


These cars are notorious for having blocked heater cores, causing the heater to blow cold air. That's because there is a heater core bypass hose near the firewall that allows the coolant to bypass the heater core. Eventually the heater core fills with gunk and no coolant passes through it. You'll need to disconnect the hoses from the heater core at the firewall and flush the core using a garden hose. Flush both ways till water runs clear. If you can't access the heater core fittings at the firewall, then follow the hoses from these fittings back to the engine and disconnect them at that point and flush from there. If you flush from the hoses in this manner, it is important that you clamp off the bypass hose at the firewall with a vice grip pliers.
Otherwise the flushing water will go through the bypass hose and not the heater core.

heater-blows-cold-air-heater-control#solution-section-hn15hvgbess52pvw4lrkzak3-4-1.jpg

Dec 21, 2015 | 2001 Ford Taurus

1 Answer

Need diagram for heater core replacement


Are you sure it needs to be replaced and not reversed flushed?



To reverse flush the heater core there are 2 hoses next to each other that go from the engine through the firewall disconnect them and with a garden hose run water through the nipples they where hooked up to.



Most heater cores don't need to be replaced unless you see water/anti-freeze on the passenger side floor mat.

Nov 26, 2015 | 1991 Volvo 940

1 Answer

How to flush heater core


Simple. You find the heater hoses feeding the heater core. Typically they are a smaller diameter then radiator hoses and they both run to the firewall. You will need to determine which one feeds the heater core ...the input hose. Once you know that ...check a Taurus owners forum or Google it ...then run your water through the heater core from the output side. The idea is to back flush the core in the hopes you knock loose the crud with high pressure water flow.

This heater core flush is usually done in conjunction with flushing the entire cooling system. Do the cooling system flush first then the heater core. When you do the system flush, use some flush agent ...Prestone makes it. If the directions say use one bottle, use two. The stuff is generally not all that potent and designed not to contaminate the ground water. Which means it's fairly lame stuff. Use two bottles.

Mar 08, 2015 | 2003 Ford Taurus

1 Answer

How do i change 92 chev luminas heater core


It is probably not the heater core do to most times when the heater core goes bad it stars putting water into the interior of the car. It may be the heater core supply valve or the blend door actuator is not working. Try warming the Vehicle, then carefully feel the heater hoses, are they both hot? If one is cooler than the other, You need to flush the core, or do a replacement job on the heater core. Also if the system has a heat control valve on the heater hose, make sure it is working! Also check the thermostat, and the temperature blend door, thats under the dash, in the heater plenum. You can flush this yourself, buy the prestone flush kit and install the tee in the heater return line. Disconnect the heater hose at the waterpump, clamp the hose in back of the tee you installed and back flush till it runs clear.20 mins or so.

Sep 15, 2014 | 1992 Chevrolet Lumina

2 Answers

HEATER ISN'T BLOWING HOT AIR


Sounds like a restricted heater core. Remove the hoses and back-flush the heater core system with a water hose. You may want to do a complete cooling system flush while you're at it.

If you can't flush the heater core clean with a water hose, it may be time to replace.

Jan 06, 2013 | 2002 Ford Ranger Regular Cab

1 Answer

How to back flush heater core 2007 grand prix


drain coolant system locate heater cores hoses going through firewall you need to buy the radiator flush kit at any auto parts stores. remove heater cores hoses from one end or buy extra long heater hoses same size as heater core hoses in vechicle at auto parts store use the flush kit when you flush through one of the heater core hoses let the other hose drain in a drain pan when you use home garden hose use low water pressure dont use garden hose to the max or you will rupture heater core. your best bet let radiator shop flush whole coolant system. because heater cores hoses are in a tight spot.make sure engine off if you just going to flush out heater core only .after flushing heater core good time to replace heater core hoses.if job too hard or complicated let radiator shop flush out radiator the engine block and heater core because if radiator stopped up or engine block stopped up the gunk and rust will reenter plug up heater core.if you tight on money you can flush out your own radiator.drain out radiator using large drain pan. remove top radiator hose and remove bottom radiator hoses connect to water pump.use garden hose with flush kit part with water pressure not too high put garden hose to top radiator hose run water until clear water run out bottom radiator hose in drain pan,the flush out engine block remove thermostat.if you had another spare thermostat housing with RTV SILICONE SEALANT THAT HAS SET UP INSTALL THERMOSTAT HOUSING BACK TO ENGINE WITHOUT THERMOSTAT FLUSH OUT THE ENGINE BLOCK, WHEN DONE INSTALL NEW THERMOSTAT THEN INSTALL ORIGINAL THERMOSTAT HOUSING WITH NEW ORING WHICH YOU BUY AT DEALERSHIP.IF ALL SOUND COMPLICATED LET RADIATOR SHOP FLUSH OUT COOLANT SYSTEM.

Nov 27, 2012 | 2003 Pontiac Grand Prix

1 Answer

Need to back flush heater core on 1999 dodge stratus where is hoses located


Regarding this types of problem,i suggest you to go through this help links.Click the link below to go through the procedure and troubleshoot the problem :----HOW TO REPLACE AN UPPER RADIATOR HOSE

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-upper-radiator-hose.html

-------------
HOW TO REPLACE A LOWER RADIATOR HOSEhttp://schematicsdiagram.blogspot.com/2011/07/how-to-replace-lower-radiator-hose.html
----------How to Flush Heater Core?http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html
------------

For heater core replacing procedure. I suggest you to go through this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models?

Click the link below: ---

http://technoanswers.blogspot.com/2011/11/how-to-replace-heater-core-for-all-car.html

--------------
How to Flush Heater Core?

http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html

---------------
How to Remove Heater Core ?

http://howtobyme.blogspot.com/2011/12/how-to-remove-heater-core-on-2008-honda.html
Heater Core Replacement?

http://howtobyme.blogspot.com/2011/12/honda-heater-core-replacement.html

------------
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------

How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to replace heater core on Buick Regal?

http://howtobyme.blogspot.in/2012/02/how-to-replace-heater-core-on-buick.html
----------This will help.Thanks.

Feb 16, 2012 | 1999 Dodge Stratus

2 Answers

My truck wont blow out any hot air, just cold. i put a new radiator and thermostat in it. it is full of anti freeze


Try removing the Heater hoses from heater tubes(be careful not to break heater tubes off) then back flush heater core with garden hose(Don't use a lot of pressure). Jell from antifreeze builds up in the heater core and blocks the coolant flow. If it is easier, remove the heater hoses from the engine, that is safer. Back flush the heater from the hoses. To Back Flush (The hose coming from the water pump is the inlet)(Hose going to Manifold is outlet) Back flush outlet hose! To much water pressure may cause damage to heater core!!!! Do Not ues AIR!!!!

Sep 28, 2010 | 2001 Chevrolet S-10

1 Answer

No heat thermostat isopening and closing andfanis working sometimes you get a little barley warm air then it goes back to cold air also ck. eng. light is on


Ck Eng light probably not related.
The heater core is clogged. A bottle of cooling system "quick flush" may be all you need ($6 AutoZone).
There is also a complete flush system, but requires that you splice into the heater hose (I installed it on my Taurus - works great!).

By the way, there is a heater core bypass hose. It is connected to the two heater core hoses near the firewall. You may want to remove the two "Tee" fittings and use a 5/8" hose splicer so that the flush passes through the heater core at full force. Put the Tee's back in place after the flush.

If you remove the tee fittings and don't flush, the heater will work, but the core may eventually start leaking.

Oct 02, 2009 | 2001 Ford Taurus

Not finding what you are looking for?
1999 Dodge Stratus Logo

1,311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...