Question about Cars & Trucks

1 Answer

Heater control sensor ford fiesta 2003

Engine managment light on code reader says heater control sensor fault where is this on fiesta 2003 petrol

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 22,156 Answers

If its a diesel engine then their is a relay/timer box but this is a petrol so iam at a loss as to weither this is a code reader fault reading the fault as i have two code readers and cannot get into a ford of this age it will only read the vin number so iam at a loss as to either a cab heater fault which i cannot see throwing the engine light on or the autochoke sensor because all these code readers give the answer in good old american and we all know they cannot spell colour correctly or pronounce aluminium.Bless them no go for the engine autochoke sensor and check that out first but the main cause of the light on with a ford of this year is the O2 sensor their are two wires the same colour out of the four wires now disconnect the socket and check for a continuety on the sensor side of the socket and if no continuety then renew the sensor if a check shows continuety the check the opposing plug socket and check for a 12v supply .Hope this helps and sorry i cannot pronounce aluminium or know the difference between a saturn or a windstar and think all nissans are diesel ,red face on my part here but iam a brit living in spain .

Posted on Feb 16, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
rockitman187
  • 2559 Answers

SOURCE: control heater resistor not working on ford fiesta 2008

It's located behind the glove compartment in the heater box.
b1af8be.jpg


Please rate this a fixya

Posted on Feb 01, 2009

pippall
  • 1486 Answers

SOURCE: heater blowing hot all the time

Change the heater contol switch.They are a big problem with the fords.Fiesta and Ka.

Posted on Jul 13, 2009

SOURCE: ford fiesta power loss

You need to check for codes to begin with. If no codes then we can start guessing. A code is pretty strait forward. Without a code, hands on will be the only way to diagnose this issue.

Posted on Nov 09, 2009

emissionwiz
  • 76118 Answers

SOURCE: check engine light on my 2003 sienna, DTC was

ok you have two banks of cylinders, the bank one cylinder bank is the one near the firewall or rear bank, the sensor you want is in the exhaust pipe from that rear bank it is before the catalytic converter.

Posted on Nov 30, 2009

  • 280 Answers

SOURCE: ford tick over problem

The battery could be slightly weak, making the computer go on the fritz, try a fresh battery!!!! The rev counters bounce often with a weak battery.

Leave feedback good or bad.

Posted on Jan 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 1.6 petrol ford fiesta, it started by failing start up when warmed up. Cuts out while driving


Ford Fiesta Start-Up Flaw (CPU-Based) - YouTube

? 1:54
www.youtube.com/watch?v=Y78GTNBytSQ
May 29, 2012 - Uploaded by georgef551 I found a start-up flaw in the Ford Fiesta, when I occasionally tried to start the car quickly, and... ... this happened. I had them either fail to fully turn over, or other CPU-based starters wouldstart up the vehicle. ..... Ford Fiesta 2004 Lx 1.4 petrol mk6 won't start help ! ... 2012 Ford Fiesta Zetec 1.6 TI-VCT. Start .

Jul 27, 2015 | Ford Cars & Trucks

1 Answer

Ford fiesta 1,4 why is it difficult to start and jerks when driving


hi could b a number of things need to put a code reader on it and see what codes it has stored on the ecu could b a crank sensor or throttle body or o2 sensor is your engine management light on the dash need more info thanx

Sep 26, 2014 | 2007 Ford Fiesta 1.4

1 Answer

Ford fiesta engine light


If the engine light is on then your ECU has detected a fault. Either in the engine or another system. You can buy a cheap reader at the parts store. They are good for active codes and resetting the Engine light. But not for codes stored in the history. Depending on which reader you buy, you may or may not be able to read Transmission, ABS, Body Control, or Air-Bag codes. Professional readers are very expensive so you may want to let a mechanic read it (get a price first). Do some research before you decide.

Feb 04, 2014 | Cars & Trucks

1 Answer

1.4 lite 3 door enjien management light flashing


Hello
When the service engine soon light (Also called the check engine light) is turned on this is to alert you to the fact that powertrain control module (computer) has detected a failure somewhere in the systems it controls, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.

Jun 26, 2012 | 2007 Opel Corsa 1.4

1 Answer

Ford fiesta 2003 orange light shape of engine on dash light won't go out WHY? I think it may be to do with emissions


that would be the check engine light.

It comes on to alert you that the computer has detected a fault with a sensor, device it controls, or system it monitors.

The first thing you will need to do is check for codes. you have three options.

1. buy a code reader. They are available anywhere that sells automotive related parts and supplies. You can find an inexpensive one for about $50.

2. call you local auto parts store. Many times they will check codes for free. DO NOT BUY ANYTHING THEY RECOMMEND!

3. Bring the vehicle to your local dealer or service facility and have them run a diagnostic test. For a fee they will check for codes and diagnose the reason for the code being set.

If you decide on option 1 or 2 post the code(s) and I'll be happy to help you further.

Jun 10, 2011 | Ford Fiesta Cars & Trucks

1 Answer

Engine man light flickering and car has lost power and is juddering.Ford focus 1.6 petrol 54reg


There is probably a sensor failure or other fault. When the engine management light is on, the ECU goes into get you home mode. I suggtes scanned the PCM to know what fault code is stored there and (with this code number) we could send additional details.

Keep in touch.

Feb 11, 2011 | 2005 Ford Focus

1 Answer

Please note the car is ia fiesta not focus( it is not listed in the listing) ford fiesta 1.4 petrol year 52 engine failure / rebuild head various dtc faults cleared ignition is coming on but car...


The code U1262 point out a communication fault between the vehicle modules and a scanner. It may be best to visit your local dealer to find if one of the vehicles control modules has failed. In some cases this can be as simple as a blown fuse, but there is always a reason for a fuse to blow
and a oil sending circuit fail. would need to be tested.
P1000 DTC code is a manufacturer specific trouble code. your code reader is not reading or communicating correctly you will need to check the fuses for all the modules and check the connections on the plugs and the units to check the modules to see if they have good contact. also check the main earth from the battery to the shell and make sure the contact is good.

Aug 04, 2017 | 2002 Ford SVT Focus

1 Answer

Ford Fusion 04 Engine Management Light


I had a 2002 model 1.4 Fiesta, same problem Engine management light or ECA, electronic accelaration Control (EAC), it needs a ford dealer to do a computer diagnostic, most likely that it will need replaced.

Mt friend who is a mechanic for ford said that it was a common factory fault and is very common in 1.4 zetec /duratec petrol models.

I now have a 2007 Fusion and was quick to see if this problem had been sorted on this model, and it has!!

Hope this helps!!

Nov 19, 2008 | 2004 Ford Fusion

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...