Question about 2000 Nissan Quest

1 Answer

How long would my 2000 nissan quest would last with a external head gasket leak the thas what my mechanic told me after replacing the knock sensor and the crankshaf sensor also the distribitor is running good now except that its externaly leaking but after checking my coolant its good my mechanic also told me that its not going to mix with oil because is external it idles a little rough but its running good i also did a full tune up but my question is how long can i drive it like that or how long would that engine last me cause im broke allready and i cant afford anymore repairs i was told to use a product call blue devil it does not clog nothing once you fluch it but with out it how long woul it last me cause i was planning on trip 1000 miles to se my kids is it ok to travel with it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 75,108 Answers

My friend that is a question that only the mechanic that knows the car can answer. Ask for his council on this.

Posted on Feb 16, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am workimg on my 2000 nissan quest. it cranks and turns over but will not start. it is throwing codes P0340 twice and P0325. we replaced the distributor cap and rotor and still nothing. probably goi


P0325 Knock Sensor 1 Circuit (Bank 1 or Single Sensor) -Circuit Malfunction
P0326 Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)
P0327 Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)
P0328 Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)
P0329 Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)
P0330 Knock Sensor 2 Circuit (Bank 2) -Circuit Malfunction
P0331 Knock Sensor 2 Circuit Range/Performance (Bank 2)
P0332 Knock Sensor 2 Circuit Low Input (Bank 2)
P0333 Knock Sensor 2 Circuit High Input (Bank 2)
P0334 Knock Sensor 2 Circuit Input Intermittent (Bank 2)
P0335 Crankshaft Position Sensor -Circuit Malfunction
P0336 Crankshaft Position Sensor -Range/Performance
P0337 Crankshaft Position Sensor -Low Input
P0338 Crankshaft Position Sensor -High Input
P0339 Crankshaft Position Sensor -Intermittent
P0340 Camshaft Position Sensor A Circuit (Bank 1 or Single Sensor) -Circuit Malfunction
sorry would a play with this to know for sure ,check the wiring plugs onto the sensors to make sure their not full of oil or corroded

Aug 07, 2014 | 2000 Nissan Quest

1 Answer

Snock sensor location nissan1994


Well the knock sensor is located under the lower intake manifold, between the two cylinder banks in the valley. It's about a 3 hour job for an experienced technician, but I have to ask why you want to replace it.

If you have a knock sensor code on any Nissan replacing the knock sensor will not fix it. The knock sensor detects unwanted engine vibrations,such as spark knock. So if you have a knock sensor code first check your spark plugs, are they ok? (if not replace them). Next Quest vans are known for clogging fuel injectors so I'd recommend running a can of sea foam injector cleaner or going to your local shop and having a professional injector cleaner run through your car.

If problems still persist after having good plugs and running an injector cleaner through, other things to look for would be intake leaks (vacuum leaks), bad mass airflow sensor or a jumped timing belt, which you will need an experienced Technician to check

Sep 14, 2012 | 1994 Nissan Quest

1 Answer

The timing belt broke on my 2000 nissan quest gxe minivan. I was told i need to 1st change the timing belt then do a compression check. The i was told by another mechanic i need to do a LEAK DOWN TEST....


the first thing to do is to replace the timing belt and water pump and timing belt components(the water pump is driven by the timing belt). the chassis has nothing to do with the engine, it is a NISSAN engine that is used in the MERCURY villager that's why FORD is on the chassis. it is however a CLOSE TOLERANCE engine, but very resiliant. the reason for the compression or leak down test is to make sure the valves are not warped and the heads are not damaged. the engine still has to be "timed" correctly or it will not pass a leak down test or compression test. in most cases, unless the engine RPM's were very high(like when you're passing someone)when the belt broke, the valves in these engines do not warp or the heads get damaged. you sound very confused about the situation, so make a few calls to some other shops and get some more prices and recommendations to see which way to go.GOOD LUCK!!!

Aug 15, 2011 | 2000 Nissan Quest

2 Answers

Knock Sensor locastion 2000 nissian quest van


it is under the lower intake manifold.

Jun 04, 2010 | 2000 Nissan Quest

1 Answer

Where does the knock sensor is located


you have to remmove the intake and it is on what looks like a bracket that bolts to both heads is the knock sensor

May 08, 2010 | 1999 Nissan Quest

1 Answer

Where is the knock sensor located?


the knock sensors (there are 2) are located under the intake manifold, u must remove the intake maniofold to replace them, also u will need the new stub wiring harness most likely to each sensor and a set of intake gaskets

Feb 04, 2010 | 2002 Nissan Quest

1 Answer

Understanding trouble codes for my vehicles


On the Nissan that code means you have a short in the knock sensor circuit or you just need a new knock sensor.

Jan 25, 2010 | 2000 Nissan Quest

1 Answer

Nissan Quest/Knock Sensor


n ot enough info to determine....... now what speed sensor.. one is the vehicle spped sensor to operate the speedodometer.. the other is for the engine speed for timming of motor..

Sep 04, 2009 | 2002 Nissan Quest

1 Answer

Need to locate knock sensor on 3.1 2000 chev lumina


knock sensors are not worth replacing. Most of the time the knock sensor is just reacting to somthing else causing it to react.


http://autos.groups.yahoo.com/group/villagerquest/

Nov 21, 2008 | 2002 Nissan Quest

4 Answers

Nissan xterra knock sensor


It's the valley of the engine underneath the intake manifold. It's about an $800 job because the top of the engine has to come off. However, unless you have a supercharged xterra it shouldn't effect performance. Also, the knock sensor will not trip the check engine light, as it does not indicate a primary problem, so if your light is on you should have another code that should be fixed first.

Nov 05, 2008 | 2002 Nissan Xterra

Not finding what you are looking for?
2000 Nissan Quest Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...