Question about Cars & Trucks
Remove inside panel yous pl yer,s to pol up little lever at the latch once open try a little string to open essayer .
Posted on Feb 16, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hood release cable is broken
Is there any part of the cable inside the cabin that you can pull with a pair of pliers? I suggest that you try that. You may need to disassemble it from the pull handle to make that work.
Posted on Dec 27, 2008
My son and I both have 99 suburbans. We both had exactly the same issue. We found the the latch or handle inside the cab on the drivers side had broken off inside the door. Not a big deal. Go to a site called " Parts Train". You can buy virtually any part for your truck there. Get a new inside door handle, pull the panel and replace it. Not an easy job to getting door panel off or back on, but I guarantee this is the problem. You won't have a problem with the passenger side because it is used less. At Parts Train make sure you order the same color as your old one. Take your time and do a good job and you will have your fix.
Posted on Dec 31, 2008
Get a female garden hose adapter from the local hardware store. Disconnect the heater hose from behind the fan pulley and attach the hose connection. Disconnect the other heater hose behind the alternator, aim it towards the ground and flush water through the heater core. This worked on my truck.
Posted on Mar 08, 2009
there's a cable that runs from the door mech up to the top latch, need to pull down on this cable to release the top latch. Only way I could pull down enough to release was through the hole just left of the opening for the mech...cable is attached to the door frame with plastic tie wrap...pop this out so the cable is free in there and then just pry down with a screwdriver...make sure your pulling the handle at the same time. Once the door is open, it's easy to see what happening, most likely the cable is stretched out too much. I just ordered the part from Ford, the cable and top latch come as one part...about $60.
Posted on May 03, 2009
remove front grille then you have to fiddle about with the catch it is quite tedious but the only way or take to a dealrship
Posted on Jul 03, 2009
Tips for a great answer:
Mar 01, 2015 | 1999 GMC Sonoma
on Feb 24, 2012 | 2001 GMC Sonoma Extended Cab
Dec 29, 2009 | 1999 Volkswagen Beetle
May 31, 2009 | 1998 GMC Sierra
Jan 06, 2009 | 2000 Chevrolet S-10
91 people viewed this question
Usually answered in minutes!