Question about Cars & Trucks

Open Question

How do I open the third door on a GMC Sonoma that has a broken cable?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: 2001 GMC Sonoma Extended Cab door handle broken

if the door can not be opened by pulling on the latch rods from where the handle is located with a pair of pliers then the inner door panel will have to be removed to gain access to the latch rods to open the door and then replace the handle. the only bad part of that is the inner door panels normally do not come off in once pice that is able to be reinstalled without being cracked or completly broken. sorry for the bad news.

Posted on Jan 27, 2009

Ad
  • 6 Answers

SOURCE: third door handle is broken

its 150.00 dollers at the deler or cheper at auto zone the 3rd door panal comes off and the bolts that holds it in is in there

Posted on Sep 10, 2009

  • 48 Answers

SOURCE: 95 GMC Sonoma --- Brake Lights and Turn Signals --- NOT WORKING

yes , i have a 96 mine done the same thing , i was removing the dash cover to install a radio accidently broke mine , i had to push down on what remained and wedged a sheetrock screw to hold it in place till i could get a new one

Posted on Dec 19, 2008

johnjohn2
  • 5763 Answers

SOURCE: broken hood release cable. Can't open hood

this is a hard one it depends on where it broke,can you cut the housing to get to cable core and pull with pleirs, if it snapped at latch then you will need to remove the grill or go from the bottom and try to hit the release the same wat the cable did,sometime if you grab the cable near the latch and pull hard it will open, good luck.

Posted on May 15, 2010

  • 3 Answers

SOURCE: How do you open the passenger rear door on a 2001

You'd have to remove the interior door panel,

Posted on Sep 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 GMC SONOMA makes a loud sqeaking noise when i take off in the first to third gear, after third gear it stops, but when i get to a stop sighn it starts all back over, loud noise.


This type of noise is likely to be a universal joint that is worn out in the drive line. have a shop put it on a lift and inspect the joints.

Jun 06, 2012 | 1995 GMC Sonoma

1 Answer

I have a 1994 Gmc Sonoma and the left door speaker wont work the speaker isnot blown i hooked it up to the othefr side and it works.


check the speaker wire that goes through the door, they break mostlyin that rubber boot when you open and close the door.

Mar 29, 2012 | 1994 GMC Sonoma

1 Answer

How do I open the third door on a 99 GMC Sonoma with a broken release cable?


remove inside panel yous pl yer,s to pol up little lever at the latch once open try a little string to open essayer .

Feb 15, 2012 | Cars & Trucks

1 Answer

GMC sonoma fuse block - where are all the fuses? My turn signals dont work.


your fuse block is on drivers side, open door look on side of console about half way down you will see a small panel door. that is your fuses

Apr 11, 2009 | 1996 GMC Sonoma

1 Answer

Third door handle is broken


its 150.00 dollers at the deler or cheper at auto zone the 3rd door panal comes off and the bolts that holds it in is in there

Apr 09, 2009 | 2000 GMC Sonoma Extended Cab

1 Answer

My tailgate won't open any more?


you can usually access the operation handle for the tailgate through a panel located on the bed side of the gate, should be screws around the panel that you can see while inside the bed

Apr 01, 2009 | 1997 GMC Sonoma

2 Answers

2001 GMC Sonoma Extended Cab door handle broken


You should replace the handle with an aluminum version. The best one I have found is sold on eBay for 12 dollars.
Look for the one sold by
mike8756.

It is easy to install, does not require removing any panels. Th first one I replaced took me about 1/2 hour. I hae done several since for friends and now takes about 15 minutes.

Installation instructions are here:

http://www.thirddoorhandle.com/installation/index.html

Good luck.
Tom

Jan 27, 2009 | 2001 GMC Sonoma Extended Cab

1 Answer

Chevy S10 extended cab third door latch broken. Is this something I can replace myself? I've removed the two hex-star screws, but am afraid to pry off housing and causing further damage. Handle is...


This is a very easy fix, I ordered a new metal one off of ebay came with instructions and was very easy to do.

Search CHEVY S-10 THIRD 3RD DOOR HANDLE 1996-2005 GMC SONOMA
on ebay, the sellers name is s.gifenigma326 very easy to work with cost 15 bucks, shipped on time.

Jan 06, 2009 | 2000 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...