Question about 1995 Toyota T100 Xtracab

2 Answers

When I accelerate, there is a tin can kind of sound. The sound ceases when just cruising along. Only hear it on acceleration? Any tips of what that could be??Thanks!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have a 1997 T100 SR5. 146,000 miles. Had the same problem. It's the heat shields over the exhaust manifolds. The welds break and they rattle. I used high-temperature exhaust putty and c-clamps to hold them steady. Works great. (Don't have access to a welder)

Posted on Nov 27, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toyota Expert
  • 362 Answers

Most likely a heat shield noise on the exhaust manifold or under the truck above the catalityc converter, the most common is from a heat shield that is ether loose or cracked on the exhaust manifold

Posted on Feb 17, 2012

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fknstart
  • 404 Answers

SOURCE: Sounds kind of like sloshing noise.

may be your heater core

Posted on May 29, 2009

  • 22 Answers

SOURCE: my camry has just developed a strange tin/metallic

could be the brakes need to be inspected........the ticking is designed to alert you to replace the brake pads...........

Posted on Feb 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

With cruise control on , after braking accelerator will not release , and car becomes undrivable. How can accelerator be released?


By not using it by the sounds of it. That is DANGEROUS!

When you touch the accelerator the Cruise Control should disengage immediately. You can also pull the Cruise Control stalk back towards you to Cancel. Does that work?

This fault is so dangerous, you should pull the fuse to it and get it to a BMW service centre. It may be part of a recall in which case rectification will be free.

Dec 02, 2015 | 2001 BMW 3 Series

1 Answer

How do i set the cruise control on my 1994 mercedes c220 elegance automatic


Cruise Control
Any given speed above approximately 22 mph (35 km/h) can be maintained with the cruise control by operating the lever.
-see photo

  1. Accelerate and set: Lift lever briefly to set speed. Hold lever up to accelerate.
  2. Decelerate and set:
    Depress lever briefly to set speed. Hold lever down to decelerate.
    Normally the vehicle is accelerated to the desired speed with the accelerator. Speed is set by briefly pushing
    the lever to position 1 or 2. The accelerator can be released. The speed can be increased (e.g. for passing)
    by using the accelerator. As soon as the accelerator is released, the previously set speed will be resumed automatically. If a set speed is to be increased or decreased slightly, e.g. to adapt to the traffic flow, hold lever in position 1 or 2 until the desired speed is reached, or briefly tip the control lever in the appropriate direction for increases or decreases in 0.6 mph (1 km/h) increments. When the lever is released, the newly set speed remains.
  3. Canceling
To cancel the cruise control, briefly push lever to position 3.
When you step on the brake or the vehicle speed drops below approx. 22 rnph (35 km/h), for example when driving upgrade, the cruise control will be canceled.
4. Resume
If the lever is briefly pushed to position 4 when driving at a speed exceeding approx. 22 mph (35 km/h), the vehicle resumes the speed which was set prior to the cancellation of the cruise control. The last memorized speed is canceled when the key in the steering lock is turned to position 1 or 0.
Note:
If the engine does not brake the vehicle sufficiently while driving on a downgrade, the speed you set on the cruise control may be exceeded and you may have to step on the brake pedal to slow down.
As soon as the grade eases, the cruise controlled speed will again be maintained as long as the brakes were not previously applied, or the lever may be used to resume the previously set speed if the brakes were applied.

set-cruise-control-1994-mercedes-c220-sufrpujyrsap3pvz3w2boz5j-3-0.jpg
http://www.benzworld.org/forums/attachments/w202-c36-c43/153145d1197313761-pdf-owners-manual-w202-1995-2000-1999-c280_owners_manual.pdf

Feb 14, 2015 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Car randomly accelerates without pushing down on pedal and cruise control is not working


It sounds to me like a problem with cruise control? Turn it off and/or unhook it, drive it a bit and see if accelerating problem goes away? If it does, you need to troubleshoot the cruise control. Any applicable trouble codes?
That sounds dangerous to me, I'd disable the cruise control till you find the problem.
I don't know what testing you have done?

Mar 27, 2017 | 2000 Ford Taurus

1 Answer

2004 Ford f150 vibration acceleration


You have problems with the driveline angles.There are TSB that the dealer has to go through.This is common for Fords

Mar 02, 2012 | 2004 Ford F150

1 Answer

I hear some kind of wobbly oscillating noise which seems to come from underneath, front passenger side (right hand drive) during accelerating from stationary. The noise oscillates faster as vehicle pick...


I HAD A SIMILIAR SOUND ON MY 2000 GRAND PRIX, WHEN IT WAS NEW. THEY REPLACED THE EXHAUST SYSTEM, & SAID IT HAD BROKEN BAFFLES IN THE CATALYTIC CONVERTER. FIND OUT WHERE YOUR CONVERTER IS LOCATED. MINE WAS UNDER THE PASSENGER SEAT.

Aug 11, 2010 | 2004 Volvo XC90

2 Answers

Mysterious car noise


Check the oil first, if it is low it will cause a host of noises in the engine.

It sounds like that may be the problem you have

Nov 22, 2008 | 2005 Honda Civic

1 Answer

Moaning sound in front end


Try rotating tires. If it gets better or worse, its probably the tires.

Nov 20, 2008 | 2003 GMC Yukon

1 Answer

99 Ford Explorer XLT


Maybe motor or tranny mounts.

Aug 05, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1995 Toyota T100 Xtracab Logo

461 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...