Question about Ford F-150

Open Question

I need serpentine belt routing diagram for a 2007 ford f-150 4.6 liter engine

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: 97 pontiac sunfire 2.2 liter serpentine routing diagram needed

this is normally located under the hood next to the hood release lever if it is missing from yours then try www.autozone.com or go to your local Pontiac dealership in the parts department or an auto parts store like Napa or Autozone

Posted on Apr 26, 2009

ZJLimited
  • 17970 Answers

SOURCE: I need a serpentine belt routing diagram for a

2004 FORD F SERIES PICKUPS - V8 4.6L 281ci GAS FI N W

Belt Routing Diagram Multiple Accessory, w/A.C. (Part Number 5060990)
a9cf3e2.jpg


Belt Routing Diagram Multiple Accessory, w/A.C (Part Number 5061015)
775ee00.jpg

More details, you can find in DAYCO Catalog.

Hope help you with this. Good luck (remember rated this help)

Posted on Sep 21, 2009

bschilz
  • 2049 Answers

SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine

Here's a link to the diagram you need...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006

Good luck and please rate this solution. Thanks.

Posted on Oct 17, 2009

Testimonial: "Looks good."

alicantecoli
  • 22095 Answers

SOURCE: I need a routing diagram for a serpentine belt on

2.0 litre engine?? thought they were only built with a 1.6 zetec engine

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install on a Ford freestyle 2007 3.0 liter / Serpentine belt replacement


Use a ratchet or breaker to release tension and route the new belt as shown here: http://serpentinebelthq.com/2005-ford-freestyle-v6-3-0l-serpentine-belt-diagram/ . The engine in the 2007 is the same as the 2005 shown on the link. Typically this job should take about 15 to 20 minutes at most. It helps, btw, to have a helper to hold that tension off the belt path until the belt is in place, then slowly release the tensioner.

Jun 08, 2017 | Ford Cars & Trucks

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    I need a belt routing diagram for a 1990 ford F-150 with a 5liter engine


    Below is the diagram to install your serpentine belt.

    1990 F-150 5.0L

    greg_margo_4.jpg

    Mar 21, 2011 | 1990 Ford F150

    1 Answer

    I need the routing diagram for the serpentine belt on a 1997 Mustang 4.6 liter.


    1997 FORD MUSTANG - V8 4.6L 281ci GAS FI N V
    Belt Routing Diagram Multiple Accessory

    4a2f6ad.jpg



    1997 FORD MUSTANG - V8 4.6L 281ci GAS FI N X
    Belt Routing Diagram Multiple Accessory
    bd5c8ac.jpg


    Hope this help (remember rated and comment this).

    Mar 29, 2010 | 1997 Ford Mustang Cobra

    1 Answer

    Looking for diagram of serpentine belt


    0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


    0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


    0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


    0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


    0996b43f80208c9f.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


    0996b43f80208ca0.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Water pump drive belt routing-Ford 3.4L SHO engine
    i wasnt sure what engine you had hope this helps good luck

    Jan 15, 2010 | 2000 Ford Taurus

    2 Answers

    Need a diagram for serpentine belt 1998 Ford Contour 4cyl 2.0l.


    98 ford contour 2.0 belt routing

    here is a picture of routing and how to do it , etc. , good resource ..

    J5

    Jan 19, 2009 | 1998 Ford Contour

    5 Answers

    Serpentine belt replacement


    2.0L Engines
    See Figures 11, 12 and 13
    The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
    Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
    The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
    0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

    Jul 24, 2008 | 1999 Ford Escort

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    213 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75117 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5474 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...