Question about 2002 Toyota Avalon

1 Answer

Cabin filter How do I release (unscrew or whatever) the lone fastener that prevents me from removing the glove compartment so I can change the cabin filter? Is there a special tool?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Release the drop rod cylinder on the right side, and then squeeze both sides of the glovebox towards the center of the glove box to lower it straight down. The drop rod cylinder is held by a screw, or a squeezable clamp for releasing it. No special tools needed.

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to locate cabin air filter on my 2004 Kia Optima Ex 4-cyl 2.4L engine


Your cabin air filter is located behind the glove box. The following YouTube video shows you how to replace your filter.

https://www.youtube.com/watch?v=xjquxBsnGpc

Apr 02, 2016 | Kia Cars & Trucks

2 Answers

Changing cabin filter


remove the glove box door and glove box to access this. its behind the right side of dash. remove the end cover and slide out the air filter and reinstall. hope this helpsonetufshoppe_110.gif

Feb 03, 2011 | 2000 Hyundai Accent

1 Answer

Heater/defrost does not change position. windows fog, fan motor running as should just will not let air into cabin.


get the cabin air filter of ur endeavor changed by following method.
Procedure to Remove the Old Cabin Filter First off, you need to open the glove compartment; you'll see two screws on top of the glove compartment and two at the bottom of it.

Remove each one of them one by one with the help of a Phillips screwdriver, and then unhook the stop bar which you can find on the right side of the glove compartment .

Next, pull the glove compartment out - while pulling the glove compartment out we disconnect the light wire .

Now, you should be able to see two tabs on both sides of the cabin filter which we press towards the middle of the compartment and then we remove the cabin filter cover . After this, slide the filter out of the housing .

Putting the New Filter In Place Now, you can easily insert the new filter in the filter housing making sure the "up" arrow printed on the filter points towards the roof of the Endeavor and then we replace the cabin filter cover.

Next, insert the glove compartment back into the dash and while it is half way through you need to reconnect the light wire.

Finally, reconnect the stop bar over the hook and finally replace the four screws to hold the glove compartment firmly in place. And, that's it - you've just learned how to change cabin filter in Mitsubishi Endeavor.

Dec 15, 2010 | 2004 Mitsubishi Endeavor

1 Answer

What is the toyota number for the cabin air


The cabin air filter is actually pretty easy to change. Here are the steps:
  1. Set the air conditioning system to Recirculation. The case for the cabin air cannot be removed with the system in the Outside Air mode.
  2. Turn the engine off.
  3. Open the Glove Compartment
  4. unclip the damper rod on the ride side of the glove compartment. To unclip it usually it is just a squeeze tab but sometimes it is a phillips head screwdriver.
  5. The glove compartment now must be squeezed together at the rear to allow the tabs to be released. Just let the glove compartment hang down.
  6. Through the glove compartment opening, locate the filter cover and remove.
  7. Remove dirty filter and replace with the new and reverse steps 1-5 to put it back together.
Shouldnt take to long usually takes me about 5 minutes to change it.

As for the toyota cabin air number im not to sure on that but you can go to any parts store and pick up an aftermarket cabin air which will save you a bit of money, same quality..

Apr 20, 2010 | 2008 Toyota Avalon

1 Answer

How do I change the cabin air filter on my 2002 Toyota Avalon XLS ?


The cabin air filter is actually pretty easy to change. Here are the steps:
  1. Set the air conditioning system to Recirculation. The case for the cabin air cannot be removed with the system in the Outside Air mode.
  2. Turn the engine off.
  3. Open the Glove Compartment
  4. unclip the damper rod on the ride side of the glove compartment. To unclip it usually it is just a squeeze tab but sometimes it is a phillips head screwdriver.
  5. The glove compartment now must be squeezed together at the rear to allow the tabs to be released. Just let the glove compartment hang down.
  6. Through the glove compartment opening, locate the filter cover and remove.
  7. Remove dirty filter and replace with the new and reverse steps 1-5 to put it back together.
Shouldnt take to long usually takes me about 5 minutes to change it.

Apr 15, 2010 | 2002 Toyota Avalon

1 Answer

Directions on replacing a cabin air filter for a 2004 Avalon


The cabin air filter is actually pretty easy to change. Here are the steps:
  1. Set the air conditioning system to Recirculation. The case for the cabin air cannot be removed with the system in the Outside Air mode.
  2. Turn the engine off.
  3. Open the Glove Compartment
  4. unclip the damper rod on the ride side of the glove compartment. To unclip it usually it is just a squeeze tab but sometimes it is a phillips head screwdriver.
  5. The glove compartment now must be squeezed together at the rear to allow the tabs to be released. Just let the glove compartment hang down.
  6. Through the glove compartment opening, locate the filter cover and remove.
  7. Remove dirty filter and replace with the new and reverse steps 1-5 to put it back together.
Shouldnt take to long usually takes me about 5 minutes to change it.

Mar 16, 2010 | 2004 Toyota Avalon

1 Answer

Pleaase advise how to install the Cabin Filter on a Hyundai 2003


Open glove compartment. Press inward at both sides of the glove compartment, then lower the glove compartment.Remove the lower side instrument panel and crash trim pad. Remove the four glove compartment upper cover retaining screws, then the cover. Remove the two glove compartment retaining bolts, then the glove compartment. Press on the cabin air filter cover tab, then remove the cove
Remove the cabin air filter from the blower unit opening. Install a new cabin filter, ensuring the air flow marking is facing in the proper direction. Install the cabin air filter cover, ensuring the cover is properly installed.
Position the glove compartment to the instrument panel, then install the two retaining bolts. Install the glove compartment upper cover. Install the lower side instrument panel crash pad. Lift the glove compartment into position. Close the glove compartment.

Oct 30, 2009 | Hyundai Motor 2003 Sonata

1 Answer

Where is the cabin air filter located at and how do i get to it.


It will either be behind your glove box, or will be located under your hood by the firewall.

    Behind the Glove Compartment
  1. Open the glove compartment and remove all the items from inside of it.
  2. Remove the glove compartment assembly retainer screws with a Phillips head screwdriver. Refer to the repair manual for your specific year and model series BMW for the exact location of the screws or carefully look around the perimeter of the interior glove box assembly to locate the screws.
  3. Locate the lower trim panel retaining screws behind the glove box assembly. Remove the screws with a Phillips head screwdriver and then remove the panel.
  4. Remove the foot-well air duct.
  5. Loosen the retaining screws of the control module box to all you to lower it down.
  6. Turn the cabin air filter panel retaining knob counterclockwise to open the panel. Pull the filter removal tab outward to remove the filter.
  7. Use a shop vac to clean out any noticeable debris from the cabin air filter housing interior.
  8. Insert the new filter and reverse the order to reassemble the foot-well air duct, the trim panel and the glove compartment assembly.
  9. Under the Hood
  10. Open the hood and locate the cabin air filter housing. The housing is located near the cowling on the top section of the firewall. Some models place the housing in the middle of the cowling, on both sides--left and right--of the cowling or on the passenger side cowling. Removal of the cowling and placing the windshield wipers in the upward position may also be required on certain models. Some 7-Series BMWs place the filter housings on both the left and right side undercarriage of the hood.
  11. Release the cabin air filter duct clamp. This can either be released by unclipping the air filter duct by pressing a retaining lock with your fingers or using a flathead screwdriver to pry off a retaining rod.
  12. Lift the cover upward--or downward on hood-installed 7-Series BMWs--to reveal the cabin air filter.
  13. Remove the cabin air filter from the air duct. Vacuum the air duct with a shop vac.
  14. Insert the new cabin air filter(s) and reassemble.

Oct 16, 2009 | 1993 BMW 7 Series

1 Answer

WHERE IS THE AIR FILTER LOCATED


The intake air filter is located under the hood on the right side ( a black tube leading to a black box which the filter is in). the cabin air filter is behind the glove compartment, just unscrew the one screw on the right of the glove compartment which holds the linkage and remove the two black tabs on each side of the inside of the glove compartment, to do this simply turn and pull each tab ( a little plier may be useful because they may be kinda tight). the glove compartment should now fall freely. behind it is a white tray which holds the air filter, simply pull it out and clean it or replace it, HINT...the funky smell that comes out of your air vents is usually caused by a dirty cabin air filter

Jul 28, 2009 | 2002 Lexus ES 300

4 Answers

Where is the cabin filter on 2001 hyundai accent locate?


Hi, this cabin filter is not the air filter, this is the A/C filter located behind the glovebox, remove a couple of screws and a bigger nutt, and the filter is located in a vertical box.

Feb 23, 2009 | 2001 Hyundai Accent

Not finding what you are looking for?
2002 Toyota Avalon Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...